BH profiles and accessories, Page 5

Plastic cap for 43x43 angle bracket in grey.

Tube for creating a handle, diameter D=32 mm, made of aluminium.

The 60x60 aluminium profile allows for the creation of channels with cables.

Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.

Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.

Magnetic stop for detachable door installation.

Universal angle bracket with a 90° angle and dimensions of 43x88 for connecting profiles from the outside using M8x16 screws.

Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.

Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.

Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M16 thread.

Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.

Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.

Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.

M18x0.75 threaded magnet for removable door installation.

Universal angle bracket with a 90° angle and dimensions of 86x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.

Aluminium profile with a modular section dimension of 45x45 and with 1 BH 45-10 shaped groove.

Aluminium profile with a modular section dimension of 45x45 and 2 adjacent BH 45-10 shaped grooves.

Aluminium profile with a modular section size of 45x45 and 3 grooves in the shape of BH 45-10.

Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.

Gas spring with a stroke of 200 mm and a force of 350 N.

Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.

Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.

Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.

Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.

Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.

Flange for connecting a 45x90 profile to a compressed air source, with a 1/4" thread.

Flange for connecting a 45x90 profile to a compressed air source, with a 3/8" thread.

Door stop for removable door installation, made of brass.

Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.

Plastic end cap made of softened PVC for closing the groove of profiles series BH 40-10, 45-10 and 50-10 in grey.

Universal angle bracket with a 90° angle and dimensions of 42x41 for joining profiles from the outside using M8x20 screws. Design with guide tabs.

Flange for blanking off the end of a 45x90 profile connected to a compressed air source.

Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.

Handle made of black polyamide with dimensions of 129x44 mm.

Floor angle bracket for mounting on profiles with a width of 45 mm.

Corner connector for connecting 3 profiles of the AC 45-8 or BH 45-10 series with a 45x45 cut at a 90° angle.

A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.

Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.

Handle made of black polyamide, dimensions 146x44 mm.

Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8/M10 screws. Design with guide tabs.