BH profiles and accessories, Page 6
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Rubber base pad insert with a diameter of 100 mm.
Aluminium profile with a modular section dimension of 45x45 and 2 adjacent BH 45-10 shaped grooves.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Polyamide rotary latch for closing doors.
Self-tapping threaded insert M12/M8 for creating an internal thread in the central bore of BH 40-10, 45-10 and 50-10 series profiles.
Plastic cap for semicircular profiles 45x45 in black
Plastic cap for semi-circular profiles 45x45 in grey
Plastic cap for 18x18 angle bracket in grey.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Flange for attaching bases and castors to 45x90 profiles with M16 thread.
Round cap for corner joint 084.310.013 made of black polyamide.
Groove connector for connecting BH 20-6 series profiles at a 45° angle.
Groove connector for joining BH 20-6 series profiles at a 30° angle.
Plastic end cap for 50x50 profiles in black
Plastic end cap for 50x50 profiles in grey
Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimensions M8x20 made of galvanised steel
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Square cover for corner connector 084.310.013 made of black polyamide.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Round cap for corner connector 084.310.013 made of grey polyamide.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Tube for creating a handle, diameter D=32 mm, made of aluminium.