BH profiles and accessories, Page 8
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Round cover cap for corner connector 084.310.022 made of black polyamide.
Round cover for corner connector 084.310.022 made of grey polyamide.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.
Slot connector for connecting BH 20-6 series profiles at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.
Groove connector for joining BH 20-6 series profiles at a 60° angle.
Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Angle bracket for groove for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Square cover for corner connector 084.310.013 made of black polyamide.
Mounting bracket for gas spring to aluminium profile.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Square base for mounting on profiles with a 45x45 section.
Groove connector for joining BH 20-6 series profiles at a 30° angle.
Flange for attaching bases and castors to BH 30-8 series profiles with a 30x60 section, equipped with an M12 thread.
Flange for attaching bases and castors to 45x90 profiles with M10 thread.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to BH 30-8 series grooves.
Connector for creating a swivel joint between profiles with a 40x80 section.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of stainless steel
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Flange for attaching bases and castors to BH 30-8 series profiles with a 60x60 section and M12 thread.
PVC seal for profile grooves for attaching panels with a thickness of 2 mm into grooves with a width of 6 mm or with a thickness of 4 mm into BH grooves with a width of 8 mm.
Universal angle bracket with a 90° angle and dimensions of 59x59 for connecting profiles from the outside using M6x16 screws.
Groove connector for connecting BH 20-6 series profiles at a 45° angle.
Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M16 thread.
Limit switch for detecting the position of hinged doors with 2 contacts (1xNC and 1xNO).
Aluminium profile with a modular cross-sectional dimension of 90x90 with 8 BH 45-10 shaped grooves. Heavy-duty version with a weight of 6.50 kg/m.
Universal angle bracket with a 90° angle and dimensions of 43x88 for connecting profiles from the outside using M8x16 screws.
Aluminium profile with a modular cross-sectional dimension of 90x90 with 8 BH 45-10 shaped grooves. Lightweight version with a weight of 4.86 kg/m.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.