IM profiles and accessories, Page 2
Product sorting
List of products
M6x16 galvanised steel pan head screw
Blanking plug for 13 mm hole, made of grey polyamide.
Stainless steel M8x30 cylindrical head screw
Stainless Steel M8x25 Cylindrical Head Screw
M4x12 zinc-plated steel cheese head screw
Black plastic end cap for closing the groove of BH 30-8 and IM 40-8 series profiles. When rotated, it can also be used as a groove seal for BH 30-8 series profiles when...
Plastic end cap for 18x40 angle bracket in grey.
Plastic end cap for 18x40 angle bracket in black.
Plastic cap for 25x40 angle bracket in black.
Plastic cap for 27x27 angle bracket in black.
Angle bracket for joining profiles with a 30x30 section at a 45° angle.
Washer for fixing glass panels to block 084.509.001.
Blanking plug for 7.5 mm hole, made of black polyamide.
Step drill with diameters D=9 mm and D=13.5 mm.
Square nut M6 for BH 30-8 and IM 40-8 grooves, with guide.
Blanking plug for 7.5 mm hole, made of grey polyamide.
Rubber cover for handle pipe with an outer diameter of D=32 mm.
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Mounting bracket for gas spring to aluminium profile.
Floor bracket for mounting on profiles with a width of 30 mm.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Clip for securing cables to aluminium profiles.
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.
Polyamide handle with dimensions 113x35 mm, orange colour.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Cover strip for closing the 60x60 channel profile.
Plastic handle cover 084.505.001, orange colour.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.
Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.