IM profiles and accessories, Page 3
Product sorting
List of products
Rubber cover for handle pipe with an outer diameter of D=32 mm.
Plastic cap for bases 084.409.004 and 084.409.002.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Mounting bracket for gas spring to aluminium profile.
Joining plate for perpendicular connection of profiles with an edge width of 40 or 45 mm.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Aluminium profile with a modular section size of 40x120 and 8 IM 40-8 shaped grooves. Heavy-duty version weighing 5.11 kg/m.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Clip for securing cables to aluminium profiles.
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
M6 Nut for IM 40-8 slot with galvanised steel spring.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Polyamide handle with dimensions 113x35 mm, orange colour.
Plastic cap for angle bracket 40x38.5 in black.
Universal angle bracket with a 90° angle and dimensions of 78x78 for connecting profiles from the outside using M8x20 screws.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Flat aluminium end cap for closing the groove of AC 45-8 and IM 40-8 series profiles.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Plastic handle cover 084.505.001, orange colour.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Plastic end cap for 40x120 profiles in black
Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.
A sliding latch with a spring for closing doors, made of polyamide.
Angle bracket for groove for connecting profiles of BH 30-8 and IM 40-8 series at a 90° angle.
PVC seal for profile groove to attach 1 mm thick panels into 8 mm wide grooves.
Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.
Handle made of black polyamide, dimensions 146x44 mm.
Square nut M4 for BH 30-8 and IM 40-8 slots, with guide.