IM profiles and accessories, Page 5
Product sorting
List of products
Plastic end cap for 80x160 profiles in black
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Aluminium profile with a modular cross-sectional dimension of 40x80. Three sides with 4 grooves of IM 40-8 shape. Lightweight version with a weight of 3.18 kg/m.
Plastic hinge made of polyamide with dimensions 50x70, for 40/40 profiles.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Blanking plug for 7.5 mm hole, made of black polyamide.
Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.
PVC seal for profile groove to attach 4 mm thick panels into 8 mm wide grooves.
PVC seal for profile groove to attach 4 mm thick panels into 8 mm wide grooves.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Flange for attaching bases and castors to AC 30-6 and IM 30-6 series profiles with a 30x60 section, equipped with an M12 thread.
Aluminium profile with a modular cross-section dimension of 45x45 and 2 adjacent IM 40-8 shaped grooves. Lightweight version weighing 1.87 kg/m.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Cover strip for closing channel profile 80x80, IM 40-8.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Square base for mounting on profiles with a 50x50 section. Attachment to the profile from three sides.
Square base for mounting on profiles with a 50x50 section.
Long T-slot nut with ball IM 40-8 with 2 M8 threads, made of galvanised steel.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Angle bracket for joining profiles with a 30x30 section at a 45° angle.
Door stop for removable door installation, made of brass.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Plastic end cap for 20x20 profiles in black
Aluminium hinge with dimensions 55x42, for profile 30/panel.
PVC seal for profile grooves for attaching 4 mm thick panels to 6 mm wide grooves or 6 mm thick panels to 8 mm grooved profiles.
The 45x45 aluminium profile allows for the creation of channels with cables.
The 80x80 aluminium profile allows for the creation of cable channels.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.