Plastic pressure regulator DM18P up to 13 bar - G 1/8" G 1/8" · up to 13 bar · 600 l/min · 77 × 40 mm
Code: DM18P
Related products
Product detailed description
A compact pressure regulator with a G 1/8" thread and a flow of 600 l/min. It reduces an inlet pressure of up to 13 bar to a value from 0 to 8 bar, and the knob lock secures the setting. The plastic body is only 40 mm wide.
Specifications
| DM18P — specifications | |
|---|---|
| Type | Pressure regulator |
| Connection | G 1/8" female thread |
| Inlet pressure | up to 13 bar |
| Pressure setting range | 0 to 8 bar |
| Setting lock | knob lock |
| Flow | 600 l/min |
| Height × width | 77 × 40 mm |
| Pressure gauge | not included, G 1/8" port |
| Body material | plastic |
| Working temperature | −10 to +50 °C |
| Medium | compressed air |
What it is for
It suits places where a tool, instrument or machine needs a lower, constant pressure than the air line supplies and where space is tight. The G 1/8" thread is suitable for a single small tool, an instrument or a machine with thin tubing.
The pressure gauge is not included; MZ01-14 fits. The filter regulator in one body is FDM18P, and you can fix the regulator to a wall with the bracket UUP. The same body with a G 1/4" thread is DM14P.
Ventilek’s tip
Set the pressure from below. First back the knob off below the value you need, then turn it up slowly until the gauge shows the right pressure. Then secure the setting with the knob lock.
Additional parameters
| Category: | Compact plastic compressed air treatment units I3 up to 13 bar |
|---|---|
| Version: | Pressure regulator |
| Pressure: | 13 bar |
| Dimensions: | 77 × 40 mm |
| Medium: | Compressed air |
| Working temperature: | -10 / 50 °C |
| Flow: | 600 l/min |
| Regulatory range: | 0 - 8 bar |
| Thread: | G 1/8" |
| Thread for manometer: | 1/8" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company employs more than 700 peopleThe company Metal Work has been engaged in the production of devices for treating compressed air and fittings since 1967, when it first started its operations. Since then, the Italian manufacturer has evolved over several decades to finally become one of the leading tyre manufacturers. Today, it employs over 350 people at its plant, with another 4 hundred working in its Italian and foreign offices. Expert and competent advice and availability of services is ensured by our extensive network of 46 branches in Italy and abroad, with which we cooperate. Currently, you can find the brand Metal Work on the following products: actuators, valves, adjustment units, fittings and accessories and pneumatic actuator KIT. |
 |
 |
The certificate guarantees quality assurance
Over the years, the entire production process has increased in quality to such an extent that the brand has become synonymous with certainty and quality in its field. In advance, the development department ensures that the most advanced technologies that the market will require in the future are always taken care of with confidence. The quality of the products themselves was certified by the German DEKRA (TGA) when their products were awarded ISO 9001 certification in 1992. Another certificate, this time in the environmental field, was obtained by the company in accordance with ISO 14001 in 2001.