SIMALUBE automatic lubricators
simalube is a Swiss single-point lubricator that replaces manual lubrication and ensures precise and continuous lubricant supply to hard-to-reach areas — even underwater. It supplies the lubricated point day after day, for up to a year. Activated by a simple twist, with an interval of 1–12 months, refillable up to 3 times, available in 5 sizes and 11 lubricant types.
Small size, big performance
The 15 ml version is the smallest automatic lubricator on the market — the perfect solution for extremely tight spaces where no other dispenser will fit. It works exactly the same and offers the same benefits as larger models, just in a miniature design.
Why choose a simalube automatic lubricator
- Space-saving due to compact dimensions
- For tight and hard-to-reach places
- For any location — even underwater
- Operating temperature −20 °C to +55 °C
- Many mounting options thanks to a wide range of accessories
- Freely selectable dispensing cycle of 1 to 12 months
- The cycle can be changed at any time
- Available pre-filled or empty for self-filling
- The lubricated point is supplied continuously
- No lubrication point is missed
- Operation by dry hydrogen cell - no battery or cables
- Can be refilled up to 3 times
- Easy disposal after the dosing cycle
- Does not contain toxic substances
Optimal dosing = savings of up to 30%
Continuous dosing reliably prevents under-lubrication and over-lubrication, which commonly occur with manual lubrication. The result is longer machine life, fewer unplanned downtimes, and lower overall maintenance costs - savings of up to 30%.
- Time savings and increased work safety due to less frequent maintenance
- Longer machine life and fewer unplanned interventions
- Lower lubricant consumption
What simalube will actually bring you
The grease gun depends on people, time, and memory. simalube dispenses on its own — continuously, precisely, and even where you can't safely reach with a gun.
- Saves maintenance time and personnel
- Increased work safety — fewer interventions on running machines and at heights
- Hard-to-reach places are lubricated permanently
- Lower lubricant consumption
Manual lubrication fluctuates between extremes — either there's too little lubricant (seized bearing), or too much (damaged seal, leakage, dirt). simalube maintains the precise dosage throughout the cycle.
- Reduced component wear
- Fewer unplanned downtimes
- Higher machine performance and reliability
The sealed construction with IP68 rating prevents lubricant mix-ups and the ingress of dirt into the lubricated point — it works even underwater.
- No lubricant mix-ups
- Lower risk of contamination
- The lubricated point remains clean
The simalube range is certified for demanding and explosive environments and complies with European and British regulations.
- Ex certification (ATEX) in all zones
- Increased workplace safety
- Recycling and disposal according to regulations — without burdening the environment
- CE and UKCA compliance
Overview of simalube lubricant fillings — which type to choose |
||||||||
| Code | Lubricant type | Temperature range | Typical use | 15 ml | 30 ml | 60 ml | 125 ml | 250 ml |
| SL01 | Multipurpose plastic grease | −30 °C to +120 °C | Rolling and plain bearings, guide surfaces and standard machine applications in industry, agriculture and transport. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL02 | Multipurpose grease with MoS₂ | -25 °C to +130 °C | Highly loaded and impact-stressed bearings, pins and sliding guides; solid MoS₂ lubricant maintains the lubricating film even under extreme pressure. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL24 | EP grease with a wide temperature range | -30 °C to +140 °C | Universal EP grease for fluctuating temperatures and medium to high loads – construction and mobile machinery, outdoor equipment. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL04 | High-temperature lubricant | −20 °C to +160 °C | Bearings in dryers, oven conveyors, fan motors, and anywhere the temperature permanently exceeds +120 °C. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL06 | EP liquid lubricant | −30 °C to +100 °C | Central lubrication circuits, gearboxes with grease fill, and slow-running bearings where good pumpability is required. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL09 | Biodegradable lubricant | −20 °C to +100 °C | Machines near water, water management, forestry, and agriculture with an environmental friendliness requirement. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL10 | Food-grade lubricant (NSF H1) | −40 °C to +120 °C | Food, beverage, and pharmaceutical operations with NSF H1 registration (incidental food contact possible). | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL14 | Chain oil | −10 °C to +90 °C | Conveyor, drive, and power chains under normal operating conditions; good penetration into links. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL15 | High-temperature chain oil | −30 °C to +250 °C | Chains in kilns, paint shops, and drying rooms; synthetic base resists high temperatures with minimal residue. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL18 | Food-grade oil (NSF H1) | −15 °C to +150 °C | Oil lubricant for food lines and machines with NSF H1 registration; sliding surfaces and open gears. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL00 | Empty – for self-filling | according to own filling | For filling with your own grease or oil according to the operating specification. Ideal where a specific lubricant is prescribed for the machine. | ✓ | ✓ | ✓ | ✓ | ✓ |
| SL | Replacement activation screws | according to own filling | After refilling with your own grease or oil according to the operating specification. The activation unit needs to be replaced for reuse. | ✓ | ✓ | ✓ | ✓ | ✓ |
| ✓ = Available size (click for product) · SL00 = Empty cartridge for filling with your own lubricant according to machine specifications. | ||||||||
Which refill size to choose
Smallest – for miniature and confined spaces where a larger dispenser cannot be fitted
Compact – one lubrication point with lower lubricant consumption
Universal – the most common choice for a standard single lubrication point
Bulky – longer service interval or higher lubricant consumption
Maxi – longest maintenance-free interval, demanding applications
Where to use simalube
- Rolling bearings
- Plain and linear guides
- Chains and conveyors
- Electric motors
- Pumps
- Gears and gearboxes
- Spindles
- Lifting systems
- Ventilation and air conditioning
- Automation and manufacturing
- Food and beverages
- Automotive
- Cement and construction
- Steel mills and mining
- Paper and printing
- Plastics, textiles, wood
- Water management and WWTP
- Wind turbines
- Railways, elevators, and escalators
- Chemicals and recycling
- Logistics and maritime transport
simalube IMPULSE connect — digital monitoring
An additional unit for digital monitoring and configuration via Bluetooth. Connection with the “World of Maintenance" application enables automatic electronic lubrication plans and an overview of the status of all lubrication points from one place.
Wide range of accessories for mounting anywhere
Thanks to the modular accessory system, simalube can be easily installed in practically any location and in any position:
45° and 90° angle connectors · Swivel elbows (male/female) · Reducer bushings (G, M, UNF threads) · 10 / 35 / 50 mm extensions · Unions with nuts · Y-splitter for 2 lubrication points · Quick connectors for Ø8 mm hose · Fixing and mounting bushings · Protective covers.
#ShowMore#
How the simalube automatic lubricator works
The simalube automatic lubricator is a single-point lubricant dispenser. After activation by turning the numbered screw, pressure is generated inside the cell (dry hydrogen fuel cell without battery), which evenly and continuously pushes the precise amount of lubricant directly to the lubricated point. The remaining amount is visible through the transparent inspection window, and dispensing can be stopped and restarted at any time. One dispenser thus replaces dozens of manual lubrication gun interventions — day after day, for up to a year.
Where automatic simalube lubricators are most applicable
- Difficult-to-access, hazardous, or easily overlooked lubrication points
- Electric motors, fans, pumps, conveyors, and drive chains
- Outdoor and wet environments — IP68 protection, works even underwater
- Food industry and pharmaceuticals — lubricant fill with NSF H1 registration
- Operations requiring Ex/ATEX environments (all zones)
- Construction, mobile, and agricultural machinery in fluctuating temperatures
How to choose the right lubricant for the automatic lubricator
The type of lubricated node and operating temperature are decisive. For standard rolling and plain bearings, choose the multi-purpose plastic grease SL01, for shock-loaded nodes SL02 with MoS₂, for high temperatures SL04 (up to +160 °C), for central lubrication systems liquid SL06, for chains series SL14/SL15, and for food industry SL10 or oil fill SL18 (NSF H1). A universal choice for outdoor equipment and fluctuating temperatures is SL24. If the machine specifies a particular lubricant, use the empty cartridge SL00 and fill it with your own lubricant.
Why switch from manual lubrication to automatic
Manual lubrication with a grease gun is irregular and depends on the human factor — it leads to insufficient lubrication (seized bearings, unplanned downtime) or over-lubrication (damaged seals, lubricant leakage, contamination). The simalube automatic lubricator dispenses evenly and continuously throughout the cycle, thereby extending bearing life, increasing work safety, and reducing total maintenance costs by up to 30%.
Frequently Asked Questions
Can the automatic lubricator be refilled? Yes, the 15–250 ml models are refillable up to 3 times — just refill the lubricant and replace the drive unit.
Does simalube work underwater? Yes, IP68 rating, operating temperature of the dispenser −20 °C to +55 °C.
How long does one filling last? Depending on the setting, 1 to 12 months of continuous lubrication; the cycle can be changed at any time.
Does simalube work in explosive environments? Yes, the series is Ex certified (ATEX) in all zones and complies with CE and UKCA.
Do I need a battery or power supply? No, the dispenser is powered by a dry hydrogen cell — no battery, no cables.
What if I don't know the required lubricant type? Use the comparison table above or contact us — we will advise on the correct combination of type and size.
VENTILEK ADVISES:
Gentlemen, hand on heart — how many bearings in operation are lubricated 'when there's time'? simalube is precisely the helper that takes care of lubrication itself, even in places you can't safely reach with a grease gun. Don't know which refill to choose? For 90% of common bearings, reach for SL01, for heat for SL04, and for chains for SL14. And if you're not sure, give us a call — we'll discuss it like man to man.
Product sorting
List of products
Simalube SL24-125 Automatic Lubricator is a single-point lubricator with a volume of 125 ml filled with wide temperature range ep lubricant (ep grease, −30 °C to +140 °C)....
simalube SL24-60 automatic lubricator is a single-point lubricator with a volume of 60 ml filled with wide temperature range ep grease (ep grease, −30 °C to +140 °C). Universal...
Simalube SL24-15 Automatic Lubricator is a single-point lubricator with a volume of 15 ml filled with EP wide temperature range lubricant (EP grease, −30 °C to +140 °C)....
simalube SL24-30 automatic lubricator is a single-point lubricator with a volume of 30 ml filled with wide temperature range ep lubricant (ep grease, −30 °C to +140 °C)....
Simalube SL24-250 Automatic Lubricator is a single-point lubricator with a volume of 250 ml filled with EP wide temperature range lubricant (EP grease, −30 °C to +140 °C)....