Cyclone separator WFITC-175 – 14 bar, G 2 1/2", 28,000 l/min cyclone element · 14 bar
Code: WFITC-175
Related products
Product detailed description
The WFITC-175 stainless steel cyclone separator removes condensate droplets — water and oil droplets — from the air before they reach the elements after it. It has a G 2 1/2" connection (female pipe thread), a flow of 28,000 l/min at 7 bar and a working pressure of up to 14 bar.
It belongs to the WFIT process filters, among the WFITC cyclone separators: the housing is the same for all stages, but instead of an element it has a cyclone element.
Specifications
| Parameter | Value |
|---|---|
| Connection | G 2 1/2" (female pipe thread) |
| Flow at 7 bar | 28,000 l/min (1,680 Nm³/h) |
| Working pressure | 14 bar |
| Cyclone element temperature | +1.5 to +120 °C |
| Cyclone element | WFC-175V |
| Housing | welded stainless steel 1.4404 |
| Height A | 722 mm |
| Width across the connections B | 226 mm |
| Housing diameter C | 139.7 mm |
| Weight | 11.4 kg |
| Condensate drain outlet E | G 1/2" thread in the bottom |
| Condensate drain | ordered separately |
Housing and dimensions
The welded housing is made of stainless steel 1.4404, or 1.4301 on request, with FKM seals (EPDM or silicone on request) and female pipe threads. It withstands −20 to +150 °C; the actual limit depends on the seals and the element.
Dimensions according to the manufacturer: height A 722 mm, width across the connections B 226 mm, housing diameter C 139.7 mm. Weight 11.4 kg.
Flow by pressure
The flow applies to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, it is multiplied by the correction factor; at 14 bar it is 1.88:
| Pressure (bar) | 4 | 7 | 10 | 14 |
|---|---|---|---|---|
| Flow (l/min) | 17,640 | 28,000 | 38,640 | 52,640 |
Cyclone element and accessories
Once a year, check the housing for visible damage. The separated condensate is drained at the bottom of the housing.
Where to place it
It goes at the start of the filtration, before the WFITN25 coarse filter or the WFITI20 sintered pre-filter.
You will find other sizes among the separators of the same range.
Additional parameters
| Category: | WFITC stainless steel cyclone separators up to 14 bar |
|---|---|
| Pressure: | 14 bar |
| Connecting: | 2 1/2" |
| Dimensions: | 722 × 226 × 139.7 mm |
| Filter insert: | WFC-175V |
| Material: | Stainless steel |
| Number of inserts: | 1 |
| Working temperature: | +1.5 / +120 °C |
| Flow: | 28,000 l/min |
| Product type: | Cyclone separator |
| Filtration stage: | Cyclone separator |
| Connection type: | Female thread |
Product rating
Be the first who will post an article to this item!
Alfa and Omega from SloveniaIn the Slovenian capital, Ljubljana, there is a company specialized in compressed air treatment, production of industrial filters and filter inserts, separators or special membrane dryers and other products. Omega Air was founded in 1988 as a family business and soon secured a place in the industry. Over the years, Omega Air's workforce has also grown with increasing production and today the company employs more than 250 people. |
 |
 |
Omega products are used everywhereA wide range of applications is typical for Omega Air products. Its products are used in heavy industry as well as by private entities. Slovenia's footprint is thus noticeable in industrial sectors such as electrical, gastronomy, pharmaceuticals, moto and also in the chemical-industrial sector. However, the company's main product is special filters, which are exported all over the world. |
No greenhorn in the industryOmega Air also boasts several proprietary innovations and patents that originate in the development department. The company has also been awarded several times for its innovative solutions at the International Engineering Fair itself, which is traditionally held in Hannover, Germany. The Omega Air product range is brought to you by our air compressors company below. |
What Omega Air produces:
|