PA12 ATEX antistatic polyamide tubing

PA12 ATEX polyamide tubes are black tubes in an antistatic version with ATEX II 2 G/D certification. The catalogue sheet specifies them for applications with demanding safety requirements, for potentially explosive atmospheres.
The range has five sizes from 4/2.5 to 12/10 mm and a working temperature of −30 to +80 °C. The working pressure depends on the diameter: the thinnest tube withstands 25 bar, the largest 5 bar.
Sizes, pressures and order codes
The size is given as outer / inner diameter in millimetres. The outer diameter must match the fitting, the inner one determines the flow. The picture shows all five sizes to the same scale.

| PA12 ATEX tubing — 5 sizes, black | ||||||
|---|---|---|---|---|---|---|
| Diameter D/d | Wall | Working pressure | Burst pressure | Bend radius | Weight | Order code |
| 4/2.5 mm | 0.75 mm | 25 bar | 74 bar | 30 mm | 10 g/m | PX425S |
| 6/4 mm | 1 mm | 15 bar | 45 bar | 45 mm | 20 g/m | PX64S |
| 8/6 mm | 1 mm | 10 bar | 29 bar | 55 mm | 28 g/m | PX86S |
| 10/8 mm | 1 mm | 7 bar | 21 bar | 70 mm | 36 g/m | PX108S |
| 12/10 mm | 1 mm | 5 bar | 16 bar | 100 mm | 44 g/m | PX1210S |
A full roll is 100 m for all sizes. Sizes 6/4 to 12/10 mm are also sold by the metre, 4/2.5 mm only as a full roll. The working pressure applies at 20 °C, the burst pressure is roughly three times higher. The tolerance of the wall thickness and outer diameter is ±0.1 mm.
#showmore#
The larger the diameter, the lower the pressure

Sizes 6/4 to 12/10 mm have a 1 mm wall, the thinnest 4/2.5 mm a 0.75 mm wall. With the same wall thickness, a larger diameter withstands a lower pressure, so the working pressure falls from 25 bar for 4/2.5 mm to 5 bar for 12/10 mm.
The large diameters 10/8 and 12/10 mm have a working pressure of 7 and 5 bar. They therefore belong in low-pressure circuits or downstream of a pressure regulator.
Working pressure falls as temperature rises

The values in the table apply at 20 °C. At 40 °C, 85 % of the working pressure remains, at 60 °C 60 % and at 80 °C, the upper limit of the working temperature, only 40 %.
For example, a 6/4 mm tube with a working pressure of 15 bar withstands roughly 6 bar at 80 °C. In warm places, choose a size with a sufficient margin.
Which diameter to choose
The diameter is chosen according to the fitting on the device, the required flow and, in this range, also the pressure. Here is what the individual sizes are usually suitable for.

4/2.5 mm
Thin control and measuring lines with the highest pressure in the range, 25 bar. Supplied only as a full 100 m roll. Other tubes with the same outer diameter are in the overview of 4 mm tubes.

6/4 mm
The most common size for valves and smaller actuators, working pressure 15 bar and bend radius 45 mm. A comparison with other materials is in the overview of 6 mm tubes.

8/6 mm
Higher flow for longer lines and larger actuators at a working pressure of 10 bar. Other ranges in this diameter are in the overview of 8 mm tubes.

10/8 mm
Large inner diameter for low-pressure circuits, working pressure 7 bar. More options are in the overview of 10 mm tubes.

12/10 mm
The highest flow in the range for circuits up to 5 bar, a bend needs a radius of at least 100 mm. Other materials of the same diameter are compared in the overview of 12 mm tubes.
Fittings, cutters and protection
The tubes are connected with push-in fittings according to the outer diameter or with compression fittings with a union nut for the exact size. Cut the tube square with a cutter so that the cut is straight and free of burrs. Choose fittings and other components for potentially explosive atmospheres according to the requirements of the equipment and site concerned.

Plastic push-in fittings
Straight, T, L, Y and threaded for diameters 4, 6, 8, 10 and 12 mm.
View
Metal push-in fittings
Brass version for diameters 4 to 12 mm.
View
Compression fittings with union nut
A secure joint for the exact size 4/2.5, 6/4, 8/6, 10/8 and 12/10 mm.
View
Tube cutters
A square, burr-free cut so that the fitting seals all the way round.
ViewWhen to choose a different tube

Colours and higher pressure
The ATEX range is black only. Polyamide tubes in azure, blue, clear and black with a higher pressure are offered by the range PA12 Extraflex, but its catalogue sheet does not list an antistatic version.

Air brakes
Black tubes made to the requirements of DIN 73378 for the air brakes of trucks and commercial vehicles are in the range PA12 for air brakes.

Moving machine parts
Where the tube keeps bending with the movement of the machine, polyurethane lasts longer. The same 10 bar pressure in all diameters is offered by PUJ polyurethane tubes.

Temperatures above +80 °C
For aggressive environments and temperatures up to +260 °C, use PTFE Teflon tubes.
Ventilek’s tip
With an ATEX tube, check both the diameter and the temperature. The thin 4/2.5 mm withstands 25 bar, 12/10 mm only 5 bar, and at 80 °C only 40 % of each value remains.
- What does the catalogue sheet say about the tubes?
- That they are made of PA12 polyamide in an antistatic version with ATEX II 2 G/D certification and that they are intended for applications with demanding safety requirements, for potentially explosive atmospheres. The working temperature is −30 to +80 °C.
- What pressure can the tube withstand?
- It depends on the size. At 20 °C, the working pressure ranges from 25 bar for 4/2.5 mm to 5 bar for 12/10 mm, the burst pressure is roughly three times higher. The exact values are in the table above.
- Does the pressure also apply at higher temperatures?
- Not in full. At 40 °C, 85 % of the working pressure remains, at 60 °C 60 % and at 80 °C 40 %.
- Are ATEX tubes also available in other colours?
- No, the range is black only in all five sizes.
- Do you also sell lengths shorter than a full roll?
- Sizes 6/4, 8/6, 10/8 and 12/10 mm yes, we sell them by the metre. The 4/2.5 mm size is supplied only as a full 100 m roll.
Data according to the catalogue sheet of the PA12 ATEX range: dimensions, working pressure at 20 °C, burst pressure, bend radius, weight, pressure drop with temperature and tolerances; antistatic version with ATEX II 2 G/D certification, working temperature −30 to +80 °C, material PA12 polyamide, colour black.
Bestsellers
Product sorting
List of products
Black antistatic PA12 ATEX tube 12/10 mm, the largest size in the range. Working pressure 5 bar, bend radius 100 mm.
Black PA12 ATEX polyamide tube 10/8 mm in an antistatic version. High flow at a working pressure of 7 bar.
Black PA12 ATEX tube 6/4 mm in an antistatic version. Working pressure 15 bar at 20 °C, sold by the metre or as a 100 m roll.
Antistatic PA12 ATEX polyamide tube 8/6 mm, black. Working pressure 10 bar, bend radius 55 mm, sold by the metre.
Black antistatic PA12 ATEX polyamide tube 4/2.5 mm with a working pressure of 25 bar, the highest in the range. Supplied as a full 100 m roll.
