PTFE Teflon tubing for high temperatures and chemicals

PTFE Teflon tubing is rigid tubing with excellent resistance to chemicals and high temperatures. It works up to +260 °C and is used in industry to carry various media and in the food industry.
Teflon resists oxygen, ozone and UV radiation, has ideal dielectric properties and a very low coefficient of friction, and is flame-retardant to UL94 V0. The range has 12 sizes from 4/2 to 18/15 mm in two lines, TEF and PTFE, in a clear, milky white colour.
Sizes, pressures and order codes
The tube size is given as outer / inner diameter in millimetres. The outer diameter determines the fitting, the inner one the flow. The range has two lines made of the same material: the eight sizes of the TEF line are sold by the metre, while for the twelve sizes of the PTFE line it depends on the size whether we sell it by the metre or as a full roll.

| Teflon tubing — 20 tubes in two lines, colour clear | ||||||||
|---|---|---|---|---|---|---|---|---|
| Order code | Diameter D/d | Wall | Working pressure | Burst pressure | Bend radius | Weight | Temperature | Sale |
| TEF42N | 4/2 mm | 1 mm | 20 bar | — | — | 20 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE42N | 4/2 mm | 1 mm | 20 bar | 60 bar | 20 mm | 20 g/m | −60/+260 °C | by the metre, roll 50 m |
| TEF425N | 4/2.5 mm | 0.75 mm | 17 bar | — | — | 16 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE425N | 4/2.5 mm | 0.75 mm | 13 bar | 40 bar | 21 mm | 16 g/m | −60/+260 °C | by the metre, roll 50 m |
| TEF53N | 5/3 mm | 1 mm | 16 bar | — | — | 27 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE53N | 5/3 mm | 1 mm | 16 bar | 48 bar | 25 mm | 27 g/m | −60/+260 °C | full roll 50 m |
| TEF64N | 6/4 mm | 1 mm | 13 bar | — | — | 34 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE64N | 6/4 mm | 1 mm | 13 bar | 40 bar | 35 mm | 34 g/m | −60/+260 °C | by the metre, roll 50 m |
| TEF86N | 8/6 mm | 1 mm | 10 bar | — | — | 47 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE86N | 8/6 mm | 1 mm | 10 bar | 30 bar | 65 mm | 47 g/m | −60/+260 °C | by the metre, roll 50 m |
| PTFE106N | 10/6 mm | 2 mm | 16 bar | 48 bar | 50 mm | 108 g/m | −60/+260 °C | full roll 50 m |
| TEF108N | 10/8 mm | 1 mm | 8 bar | — | — | 60 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE108N | 10/8 mm | 1 mm | 8 bar | 24 bar | 100 mm | 60 g/m | −60/+260 °C | by the metre, roll 50 m |
| PTFE129N | 12/9 mm | 1.5 mm | 8 bar | 25 bar | 100 mm | 105 g/m | −60/+260 °C | full roll 50 m |
| TEF1210N | 12/10 mm | 1 mm | 7 bar | — | — | 73 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE1210N | 12/10 mm | 1 mm | 7 bar | 20 bar | 150 mm | 73 g/m | −60/+260 °C | by the metre, roll 50 m |
| TEF1412N | 14/12 mm | 1 mm | 6 bar | — | — | 86 g/m | −98/+260 °C | by the metre, roll 50 m |
| PTFE1412N | 14/12 mm | 1 mm | 6 bar | 17 bar | 200 mm | 86 g/m | −60/+260 °C | full roll 50 m |
| PTFE15125N | 15/12.5 mm | 1.25 mm | 7 bar | 20 bar | 200 mm | 114 g/m | −60/+260 °C | full roll 25 m |
| PTFE1815N | 18/15 mm | 1.5 mm | 7 bar | 20 bar | 250 mm | 164 g/m | −60/+260 °C | full roll 20 m |
The working pressure applies at 20 °C. The catalogue gives burst pressure and bend radius only for the PTFE line; for the TEF line the table shows a dash. Tolerances of the inner diameter (±0.1 to ±0.3 mm) and wall (±0.2 to ±0.3 mm) are on the product page of each tube.
#showmore#
Working pressure falls as temperature rises

Teflon works up to +260 °C, but withstands less pressure as the temperature rises. The table value applies at 20 °C. At 50 °C it is half, at 100 °C 35 %, at 150 °C 30 % and at 200 °C only 10 %.
Example: the 6/4 mm tube has a working pressure of 13 bar at 20 °C, 4.5 bar at 100 °C and 1.3 bar at 200 °C. The converted values for each size are on the product page of the tube.
If you need a higher pressure and the temperature does not exceed +100 °C, consider harder PVDF tubing with a working pressure of 21 to 78 bar at 20 °C, available in the overview PVDF tubing.
The larger the diameter, the lower the pressure

For tubes with a 1 mm wall, the working pressure falls with the diameter, from 20 bar for 4/2 mm to 6 bar for 14/12 mm.
The exceptions are the 10/6 mm tube with a 2 mm wall, which withstands 16 bar, and the 12/9 mm tube with a 1.5 mm wall at 8 bar. The largest sizes, 15/12.5 and 18/15 mm, have thicker walls of 1.25 and 1.5 mm and a working pressure of 7 bar.
Properties of PTFE Teflon
PTFE is a fluoroplastic for places where high temperature meets an aggressive medium or a demanding environment. The manufacturer’s data sheet describes it as the most chemically resistant plastic known.
| PTFE material according to the manufacturer’s data sheet | |
|---|---|
| Property | Value |
| density | 2.15 g/cm³ |
| melting point | 327 °C |
| water absorption | below 0.01 % |
| dielectric constant | 2.1 |
| elongation at break | 300 % |
| oxygen index | above 95 % |
| hardness | 60 Shore D |
| flammability | UL94 V0 |
Water absorption below 0.01 % means that the material practically does not absorb water. An oxygen index above 95 % and class UL94 V0 describe its resistance to burning.
TEF and PTFE lines: which to choose
Both lines are made of PTFE Teflon and have the same working pressure in the same size, except that at 4/2.5 mm TEF withstands 17 bar and PTFE 13 bar. They differ in the lower temperature limit, the data in the catalogue and whether we sell the tube by the metre.

PTFE line: 4 to 18 mm
Twelve sizes from 4/2 to 18/15 mm with a working temperature of −60 to +260 °C. The catalogue also gives burst pressure and bend radius for them. Six sizes are sold by the metre, the others as a full roll.

TEF line: frost down to −98 °C
Eight sizes from 4/2 to 14/12 mm with a working temperature of −98 to +260 °C. All are sold by the metre; a full roll is 50 m.

Only in the PTFE line
The sizes 10/6, 12/9, 15/12.5 and 18/15 mm are offered only in the PTFE line. The thick-walled 10/6 mm withstands 16 bar, and 18/15 mm has the highest flow.
Fittings and accessories
The fitting must withstand the same medium, pressure and temperature as the tube. Fittings for aggressive media are made of several materials with different chemical resistance and working temperatures, so check the resistance of the joint for the specific medium.

Fittings for aggressive media
Joint for plastic tubing carrying aggressive media and for higher temperatures, in several materials.
View
Cutters and accessories
A square cut without burrs, so that the joint seals around the whole circumference.
ViewOther fluoroplastic tubing

Higher pressure up to +100 °C
Harder PVDF tubes with a hardness of 80 °Sh withstand 21 to 78 bar at 20 °C and work from −40 to +100 °C. You will find them among the PVDF Kynar tubing.

Highly transparent tube
Where you need to see inside the tube, with a working temperature of −60 to +260 °C, choose highly transparent PFA tubing.

For the laboratory
Extremely transparent tubing for laboratories and the chemical industry with temperatures up to +200 °C is FEP fluoropolymer tubing.

Compressed air without chemicals
For ordinary compressed air without demands on chemical and temperature resistance, the softer choice is PE polyethylene tubing.
Ventilek’s tip
Always convert the pressure of a Teflon tube to the temperature. At 20 °C it withstands the table value, at 200 °C only a tenth.
- What is the difference between the TEF and PTFE lines?
- Both are made of PTFE Teflon. The TEF line has eight sizes from 4/2 to 14/12 mm, works from −98 °C and is sold by the metre. The PTFE line has twelve sizes from 4/2 to 18/15 mm, works from −60 °C, and the catalogue also gives burst pressure and bend radius for it. In the same size, both lines have the same working pressure, except for 4/2.5 mm.
- What pressure does the tube withstand at higher temperatures?
- The working pressure in the table applies at 20 °C. At 50 °C it falls to 50 %, at 100 °C to 35 %, at 150 °C to 30 % and at 200 °C to 10 %. The conversion for each size is on the product page of the tube.
- Is the clear Teflon tube transparent?
- The catalogue lists it as clear; it looks milky white and translucent. If you need to see clearly inside the tube, choose highly transparent PFA or FEP tubing.
- Do you also sell lengths shorter than a full roll?
- Yes for the whole TEF line, which we sell by the metre; a full roll is 50 m. In the PTFE line we sell the sizes 4/2, 4/2.5, 6/4, 8/6, 10/8 and 12/10 mm by the metre. The sizes 5/3, 10/6, 12/9 and 14/12 mm are supplied only as a full 50 m roll, 15/12.5 and 18/15 mm in rolls of 25 and 20 m.
- Is the tube suitable for my medium?
- The catalogue states excellent resistance to chemicals and use in industry to carry various media and in the food industry. We will be happy to check its resistance to your specific medium at your temperature and pressure.
Data according to the catalogue sheets of the TEF and PTFE lines, the TEF technical data sheet and the PTFE manufacturer’s data sheet: sizes, wall thickness, working pressure at 20 °C, burst pressure and bend radius (PTFE line), weight, working temperature −98 to +260 °C (TEF) and −60 to +260 °C (PTFE), pressure derating with temperature, tolerances and material properties.
Product sorting
List of products
Clear Teflon tube 8/6 mm for higher flow. Working pressure 10 bar at 20 °C, temperature −98 to +260 °C.
PTFE Teflon tube 4/2.5 mm with a thinner 0.75 mm wall and a larger inner diameter. Working pressure 17 bar at 20 °C.
PTFE Teflon tube 12/10 mm for higher flow at lower pressure. 7 bar at 20 °C, temperature −98 to +260 °C.
Clear PTFE Teflon tube 5/3 mm for connections with a 5 mm outer diameter. Working pressure 16 bar, temperature −98 to +260 °C.
Clear PTFE line Teflon tube 8/6 mm for higher flow. Working pressure 10 bar, burst pressure 30 bar, sold by the metre.
PTFE line Teflon tube 10/8 mm with a large inner diameter. Working pressure 8 bar, burst pressure 24 bar, sold by the metre.
PTFE line Teflon tube 6/4 mm with a 1 mm wall. Working pressure 13 bar, burst pressure 40 bar and bend radius 35 mm, sold by the metre.
PTFE line Teflon tube 4/2.5 mm with a 0.75 mm wall. Working pressure 13 bar, burst pressure 40 bar, sold by the metre.
PTFE Teflon tube 6/4 mm with a 1 mm wall. Working pressure 13 bar at 20 °C, resistant to chemicals and temperatures up to +260 °C.
Clear Teflon tube 14/12 mm, the largest of the TEF line. Working pressure 6 bar at 20 °C, sold by the metre or as a 50 m roll.
Clear PTFE Teflon tube 10/8 mm with a large inner diameter. Working pressure 8 bar at 20 °C, sold by the metre.
Clear Teflon tube 4/2 mm made of PTFE with a working pressure of 20 bar, the highest in the range. It works from −98 to +260 °C and is sold by the metre.
Clear PTFE line tube 12/10 mm for high flow. Working pressure 7 bar, burst pressure 20 bar, sold by the metre.
PTFE line Teflon tube 12/9 mm with a thicker 1.5 mm wall. Working pressure 8 bar and burst pressure 25 bar, full roll of 50 m.
The largest Teflon tube in the range: PTFE 18/15 mm with a 1.5 mm wall. Working pressure 7 bar, full roll of 20 m.
Clear PTFE line tube 5/3 mm for connections with a 5 mm outer diameter. Working pressure 16 bar and burst pressure 48 bar, full roll of 50 m.
PTFE line Teflon tube 4/2 mm with a working pressure of 20 bar and a burst pressure of 60 bar. It works from −60 to +260 °C and is sold by the metre.
PTFE line Teflon tube 14/12 mm with a 1 mm wall. Working pressure 6 bar and burst pressure 17 bar, full roll of 50 m.
PTFE Teflon tube 10/6 mm with a thick 2 mm wall. Working pressure 16 bar, burst pressure 48 bar, supplied as a full 50 m roll.
PTFE Teflon tube 15/12.5 mm with a 1.25 mm wall. Working pressure 7 bar, burst pressure 20 bar, full roll of 25 m.