PVDF Kynar tubing for aggressive media

PVDF tubing is rigid tubing made of Kynar HD 4000 without additives. It has excellent resistance to chemicals, including many aggressive substances, and is designed for demanding industrial applications.
It resists ageing, abrasion and UV radiation, does not change colour with heat and is flame-retardant to UL94 V0. At 20 °C it withstands a working pressure of 21 to 78 bar, considerably more than our other fluoroplastic tubing. The working temperature is −40 to +100 °C.
Sizes, pressures and order codes
The tube size is given as outer / inner diameter in millimetres. The outer diameter determines the fitting, the inner one the flow. We supply the tubes in 100 m rolls; the 6/4 mm size is also sold by the metre.

| PVDF tubing — 8 sizes, colour clear | |||||||
|---|---|---|---|---|---|---|---|
| Order code | Diameter D/d | Wall | Working pressure | Burst pressure | Bend radius | Weight | Sale |
| PVDF42N | 4/2 mm | 1 mm | 78 bar | 233 bar | 25 mm | 17 g/m | full roll 100 m |
| PVDF425N | 4/2.5 mm | 0.75 mm | 54 bar | 162 bar | 30 mm | 14 g/m | full roll 100 m |
| PVDF64N | 6/4 mm | 1 mm | 47 bar | 140 bar | 45 mm | 28 g/m | by the metre, roll 100 m |
| PVDF85N | 8/5 mm | 1.5 mm | 54 bar | 162 bar | 60 mm | 55 g/m | full roll 100 m |
| PVDF86N | 8/6 mm | 1 mm | 33 bar | 100 bar | 65 mm | 39 g/m | full roll 100 m |
| PVDF108N | 10/8 mm | 1 mm | 26 bar | 78 bar | 80 mm | 50 g/m | full roll 100 m |
| PVDF1210N | 12/10 mm | 1 mm | 21 bar | 64 bar | 100 mm | 61 g/m | full roll 100 m |
| PVDF1411N | 14/11 mm | 1.5 mm | 28 bar | 84 bar | 150 mm | 102 g/m | full roll 100 m |
The working pressure applies at 20 °C; the burst pressure is roughly three times higher. Tolerances: wall thickness ±0.07 mm, outer diameter up to 8 mm ±0.07 mm, from 10 mm ±0.1 mm.
#showmore#
Working pressure falls as temperature rises

PVDF works up to +100 °C, but withstands less pressure as the temperature rises. At 30 °C it is already 72 % of the table value, at 60 °C about half and at 90 °C a quarter. At the upper limit of +100 °C, 10 % remains.
Example: the 6/4 mm tube has a working pressure of 47 bar at 20 °C, 24.4 bar at 60 °C and 11.7 bar at 90 °C. The conversion for each size is on the product page of the tube.
For temperatures above +100 °C, Teflon tubing with a working temperature of up to +260 °C is available in the overview Teflon tubing.
High pressure even in larger diameters

Rigid PVDF with a hardness of 80 °Sh holds high pressure even with a 1 mm wall. The thinnest 4/2 mm tube withstands 78 bar, the 12/10 mm still 21 bar. The 8/5 and 14/11 sizes have a thicker 1.5 mm wall and withstand 54 and 28 bar.
For comparison: a 12/10 mm Teflon tube withstands 7 bar at 20 °C. Of our fluoroplastic tubing, PVDF withstands the highest pressure in all sizes, but works only up to +100 °C.
Properties of Kynar HD 4000
Kynar HD 4000 is pure polyvinylidene fluoride (PVDF) without additives, with a fluorine content of about 59 %. According to the manufacturer’s data sheet, it is impermeable to gases and swells only slightly in some solvents.
| Kynar HD 4000 according to the manufacturer’s data sheet | |
|---|---|
| Property | Value |
| density | 1.78 g/cm³ |
| melting point | 170 °C |
| flexural modulus at 23 °C | 2100 MPa |
| tensile strength at yield | 51 MPa |
| elongation at yield | 9 % |
| elongation at break | above 50 % |
| hardness | 80 Shore D |
| flammability | UL94 V0 |
According to the manufacturer’s data sheet, its good abrasion resistance also allows it to carry liquids with solid particles. Its resistance to ageing comes from the material being inert to UV radiation.
Which size to choose
All sizes share the same material, temperature and hardness. They differ in flow, pressure and minimum bend radius.

4/2 and 4/2.5 mm
The highest pressure of 78 and 54 bar and the smallest bend radius of 25 and 30 mm. For thin lines with low flow.

6/4, 8/5 and 8/6 mm
Medium flow at 47, 54 and 33 bar. The thick-walled 8/5 mm fits the same fitting as 8/6 mm. The 6/4 mm size is the only one we also sell by the metre.

10/8, 12/10 and 14/11 mm
The highest flow at 26, 21 and 28 bar. For bends, allow for a radius of 80, 100 and 150 mm.
Fittings and accessories
The fitting must withstand the same medium, pressure and temperature as the tube. Fittings for aggressive media are made of several materials with different chemical resistance and working temperatures, so check the resistance of the joint for the specific medium.

Fittings for aggressive media
Joint for plastic tubing carrying aggressive media and for higher temperatures, in several materials.
View
Cutters and accessories
A square cut without burrs, so that the joint seals around the whole circumference.
ViewOther fluoroplastic tubing

Temperature above +100 °C
At 20 °C they withstand 6 to 20 bar, and they work up to +260 °C: PTFE Teflon tubing.

Highly transparent tube
Where you need to see inside the tube, with a working temperature of −60 to +260 °C, choose PFA tubing.

For the laboratory
Extremely transparent tubing for laboratories and the chemical industry with temperatures up to +200 °C is FEP tubing.

Compressed air without chemicals
For an ordinary compressed air network, the right choice is polyamide PA11 Rilsan tubing.
Ventilek’s tip
The high pressure of PVDF tubing applies at 20 °C. At 30 °C allow for 72 %, and at 90 °C only a quarter.
- What is Kynar HD 4000?
- It is the designation of the material the tubes are made of. It is pure polyvinylidene fluoride (PVDF) without additives, which is why the tubes are called Kynar tubes.
- What pressure can PVDF tubing withstand?
- At 20 °C the working pressure is 21 to 78 bar depending on the size, and the burst pressure is roughly three times higher. As the temperature rises, the pressure falls, to about half at 60 °C and to a tenth at 100 °C.
- Do you also sell lengths shorter than a full roll?
- Yes for the 6/4 mm size, which we sell by the metre. The other sizes are supplied only in full 100 m rolls.
- Can I see inside the tube?
- The catalogue lists it as clear; it looks milky white. Where you really need to see the contents of the tube, choose highly transparent PFA or extremely transparent FEP tubing.
- Is the tube suitable for my medium?
- The catalogue states excellent resistance to chemicals, including many aggressive substances. We will be happy to check its resistance to your specific medium at your temperature and pressure.
Data according to the catalogue sheet and the Kynar HD 4000 material data sheet: sizes, working and burst pressure at 20 °C, bend radius, weight, tolerances, working temperature −40 to +100 °C, pressure derating with temperature, hardness 80 °Sh and material properties.
Product sorting
List of products
Clear PVDF tube 6/4 mm with a working pressure of 47 bar. The only size in the range that we also sell by the metre.
PVDF tube 4/2.5 mm with a 0.75 mm wall and a larger inner diameter. Working pressure 54 bar at 20 °C, full roll of 100 m.
Clear PVDF tube 10/8 mm with a large inner diameter. Working pressure 26 bar at 20 °C, full roll of 100 m.
Clear PVDF tube 8/5 mm with a thick 1.5 mm wall. Working pressure 54 bar and burst pressure 162 bar, full roll of 100 m.
The largest PVDF tube: 14/11 mm with a 1.5 mm wall. Working pressure 28 bar and burst pressure 84 bar, full roll of 100 m.
Clear PVDF tube 12/10 mm with a thin 1 mm wall for high flow. Working pressure 21 bar and burst pressure 64 bar, full roll of 100 m.
Clear PVDF tube 4/2 mm with a working pressure of 78 bar and a burst pressure of 233 bar. Supplied as a full 100 m roll.
PVDF tube 8/6 mm for a higher flow of aggressive media. Working pressure 33 bar at 20 °C, full roll of 100 m.