Pneumatic tools

Pneumatic impact wrenches M7

Do you frequently need to loosen or tighten screws or nuts? Do you work with rusted or hard-to-disassemble threaded joints? Reach for one of the impact pneumatic wrenches from Mighty Seven (M7).

How to work with an impact wrench The wrench acts on the screw joint by rotation combined with a double hammer impact mechanism. When loosening, the impacts are directed to the left, and when tightening, to the right. Vibrations are not transmitted to the tool body, so you don't need to worry about kickback. M7 impact wrenches generate great force and are easy to handle because they are not too heavy. The NC6210 and NC6220 series wrenches, for bolts and nuts up to 19 mm, weigh only 2.55 kg. What you'll appreciate about M7 impact wrenches: square drive clamping – 3/8", 1/2", 1", 1.5" bolt sizes: 13 to 50 mm ergonomically shaped handle forward and reverse rotation for tightening and loosening

Which wrenches are available

The e-shop www.kompresory-vzduchotechnika.cz offers a wide range of impact pneumatic wrenches.

There are wrenches available for small bolts with a 3/8" square drive, suitable for bolts of size 13 mm, up to "heavy-duty" models that can handle bolts of size 50 mm and generate torque of up to 4,065 N.m.

How to choose a pneumatic impact wrench M7

Find the wrench type in the table below according to these criteria:

• Bolt size
• Wrench reach

Bolt size

How large a nut or bolt the wrench can move depends on the size of the clamping square drive: 1/8", 1/2", 1", or 1.5".

A so-called socket is mounted on the square drive, which is a reduction part that has a square drive on one side for fitting into the wrench and a hexagon on the opposite side. Before buying a pneumatic wrench, go through the Sockets for Wrenches section and find out which sockets are available for the selected wrench.

You can also choose a wrench set with clamping sockets:

Wrench NC-6113 8 standard length attachments 26, 27, 29, 30, 32, 35, 36, 38 mm 1 extension attachment 178 mm 1 universal coupling 2 Allen keys 4 and 5 mm 1 o-ring and pin 1 mini oiler 1/4" female/male 1 nipple 1/4" for air connection

Wrench reach

If you need to reach a more distant bolted joint with the impact wrench, choose an impact wrench with an extended shaft (ending in a 5 in the type designation: NC4215, NC6215). You can extend the reach of the impact wrench with an extension bar.

M7 ratchet wrenches

For working with smaller bolted joints (up to 16 mm), pneumatic ratchet wrenches are advantageous. These very light tools are well suited for use in car service centers, for maintenance of cars or motorcycles. They have lower torque than impact wrenches, but a long service life, because their gearbox and ball bearings are made of hardened materials.

What you will appreciate about M7 pneumatic ratchet wrenches

The gearbox and ball bearings are made of hardened materials. Forward and reverse rotation for tightening and loosening Easy attachment of sockets using a square drive – 1/4", 3/8", 1/2".

Which M7 ratchet wrenches are available

Socket attachment

Ratchet wrenches are terminated with a square drive, onto which a so-called socket or attachment is mounted, which is a reduction part terminated with a hexagon of the same size as the bolt or nut to be tightened or loosened.

On the portal www.kompresory-vzduchotechnika.cz you can find a range of sockets for wrenches.

Pneumatic grinders M7

Compressed air supply For pneumatic grinders to operate reliably and without faults, a supply of properly treated air is required. The supply air should be dry and clean, i.e. free of water and impurities, and lubricated as needed. Constant inlet pressure is important: 6.3 bar +10%, so the compressor should have 7 bar and it depends on the number of pneumatic tools connected.

Safety when working with a grinder

Working with pneumatic grinders can easily lead to injury, so please read the instructions for working with grinders provided on the portal www.kompresory-vzduchotechnika.cz.

Grinders are relatively noisy devices, so protect your hearing. Loose parts of clothing, hair, straps, etc. can easily get wound around fast-rotating discs or grinding bodies. Adjust your clothing accordingly so that this cannot happen.

Protect your face and hands from burns and cuts. The face can be protected with a face shield.

Pneumatic miniature grinders with a 3 mm shank

You can conveniently sand small parts and small surfaces with the miniature die grinder QA-432 with a 3 mm shank. For safe operation, the hose is equipped with protection against flying sparks.

How to work with miniature pneumatic grinders

Which miniature M7 die grinders are available

These die grinders can be fitted with grinding points with a 3 mm or 6 mm shank. The advantage is the ability to regulate the speed of the grinding point.

How to work with a die grinder

For grinding wood, metal or other materials, you will certainly find a grinder of the right size and power in the M7 tool range, along with suitable grinding points with a 3 mm or 6 mm shank. Replacing the grinding point: The picture shows how to replace the grinding point. Use only the wrenches supplied with the grinder and turn counterclockwise. Before use, check the grinding point for chips, cracks or other damage. Such a point could disintegrate during work and injure you.

Pneumatic angle grinders

Angle grinders, commonly referred to as "flexas", cut-off tools or cut-off grinders, can be used for example for precise cutting of metal pipes and profiles, grinding welds, cleaning up various edges and rims, removing paint and metal corrosion, as well as for cutting and grinding concrete, stone, tiles, etc.

What you will appreciate about angle grinders:

• removable handle,
• safety lock,
• different types for discs with a diameter of 125 mm, 178 mm and 230 mm,
• front or rear air exhaust

How to choose an angle grinder?

The most important parameter is the disc size. As you can see in the table, each grinder type is designed for one disc size; do not fit a disc of a different size into the grinder, because each grinder size is designed for different rotational speeds. At unsuitable speeds, the disc may crack and injure the operator.

M7 pneumatic eccentric and vibration sanders

For sanding large wooden and metal surfaces, an eccentric sander will serve well. The disc is mounted eccentrically (with an eccentricity of 5 mm at the circumference). Thanks to this, you will not reach the same spot twice at the same moment with the sander. This way you avoid scratches, and the sanded surface will be smooth. What you will appreciate about M7 pneumatic eccentric sanders Discs are conveniently attached using hook-and-loop fastening. The sanders can be operated with one hand using a rubberized handle

Vibration sander In the category of eccentric sanders, you will also find a vibration sander. How to work with an eccentric sander Instead of a sanding disc, you fit a rectangular sheet of sandpaper into this sander. Then you proceed to sand wooden and metal surfaces. The sander has no dust extraction. Thanks to the low center of gravity, you will sand surfaces evenly.

Which M7 random orbital sanders are available

In the M7 pneumatic tools range, there is a wide selection of random orbital sanders.

M7 pneumatic shears and sheet metal nibblers

Pneumatic sheet metal shears come in handy for bodywork and metalworking. They are suitable for straight cutting of material up to 1.5 mm thick.

How to work with pneumatic shears

What you will appreciate about the pneumatic shears:

• The shear blades are made of hardened steel.
• Safety is ensured by a trigger mechanism with a lock.

The QG-103 sheet metal nibbler is suitable for cutting in all directions. It is easy to handle and will serve well for demanding bodywork as well as metalworking. What you will appreciate about the M7 sheet metal nibbler It is not very loud thanks to rear air exhaust. It is activated by a safety mechanism.

What pneumatic shears are available

Pneumatic body saws M7

Cutting aluminium sheets and plastics with a straight pneumatic saw is very easy. You simply install the saw blade with the quick-release clamp and easily set the precise cutting depth.

How to work with a body saw

What you will appreciate about M7 body saws

• Cutting aluminium sheets, plastics and wood up to a thickness of 1.6 mm
• Quick blade replacement: by loosening the set screws, one on each side

What M7 body saws are available

Pneumatic drills M7

Drills powered by compressed air are very well suited for drilling holes in industrial plants and production lines, as well as in craft workshops and car service centres.

What you will appreciate about M7 pneumatic drills

• Easy and fast drilling
• The speed can be set in the range of 1,800 to 2,200 RPM.
• Drill bits are replaced simply using a chuck key.
• Use the switch on the drill body to easily change the drill's rotation direction (clockwise or counterclockwise).

Which M7 pneumatic drills are available

Pneumatic screwdrivers M7

Pneumatic screwdrivers significantly ease and speed up assembly work in industrial plants and on assembly lines.

How to work with the M7 pneumatic screwdriver What you will appreciate about M7 pneumatic screwdrivers Extremely long service life – the screwdrivers are tested for more than 1,500,000 cycles. You can set the torque precisely with a tolerance of 5%. Screwdriving bits are attached using a standard 6.35 mm hex shank

Which M7 pneumatic screwdrivers are available

Digital torque meter ZT-3 For precise torque setting of screwdrivers, you can use the digital meter in a practical carrying case. Measuring range 0 to 10 Nm

Pneumatic chisel hammers M7

Chisel hammers M7 made of high-alloy steel have a long service life. They are suitable for craft workshops and for construction and plumbing work.

What you will appreciate about the M7 chisel hammers

• The chisels are easily replaced using the clamping chuck (spring).
• The chisel hammers are supplied with five chisels (flat, cutting, splitting and scraping versions).
• The chisels are 175 mm long.

Which pneumatic chisel hammers are available

SN-1288 needle scaler A tool similar to a chisel hammer, which has needles made of long-lasting spring steel instead of a shank.

Pneumatic rivet guns

Rivet guns M7 made of high-quality materials are used in auto repair shops, craft workshops and industry; they require a working pressure of 6.3 bar.

How to work with pneumatic rivet guns

What you will appreciate about M7 riveting pliers

• They can be equipped with a bowl for convenient collection of used rivets.
• Vacuum rivet-holding function – you will appreciate this especially in hard-to-reach areas.

What to watch out for when choosing

Individual types of riveting pliers differ in their pulling force. Therefore, when choosing, answer two questions:

• What size rivets will you be using?
• What material is their mandrel and the rivet itself made of?

What riveting pliers are available

M7 pneumatic grease guns

Effective lubrication of machines and equipment extends their service life, so it is worth using M7 pneumatic grease guns.

What you will appreciate about M7 pneumatic grease guns The grease guns are made of durable stainless steel material, which increases their service life. Pressure from 5 to 10.5 bar ensures correct dispensing of lubricant into the lubricated machine or equipment Suitable for industrial applications and agriculture.

Which automatic lubricators are available

Window glass cutter QK-111

Professional tool for easy cutting out of window glass from frames, especially in car repair shops or in construction

How to work with the window glass cutter

What you will appreciate about the M7 window glass cutter

• Rear air outlet reduces noise and directs the air stream away from the working area
• Low vibrations and small oscillations for a long service life of the attachments
• Universal attachment fitting in twelve different ways
• Attachments of five different shapes can be fitted to the cutter

Cartridge gun SK-1010 When sealing and gluing, you will appreciate a gun that helps you smoothly dispense sealant from cartridges. A steady supply of compressed air ensures smooth dispensing of the sealant. The result is higher-quality work and material savings.
QB-802 sticker remover With a special tool, you can perfectly remove vinyl stickers, rust and oxides from car bodies. You can clean a car body with a wrap without damaging the paint. The car body surface does not need to be heated.

Digital tire inflator SB-304

The tyre inflator in an aluminium housing is suitable for garages and craft workshops. Tyre pressure is shown on a digital display (diameter 63 mm). To prevent damage to the pressure gauge, it has a rubber protective cover. Tyre inflation is controlled by a lever, and venting by a button on the rear of the inflator. Hose length 300 mm Steel cable for long service life Variably adjustable stroke