Accessories for compressed air filters

A compressed air filter needs more than a housing and an element. To clean reliably without wasting energy, its element has to be replaced in time, the condensate drained and the filter firmly mounted. Here you will find parts for all three jobs.
The parts are mainly for Omega Air filters; the elements are also for Hankison filters.
What a filter needs in operation
| Part | What it is for | When to think of it |
|---|---|---|
| Spare element | cleans the air; a clogged one raises the pressure drop and energy consumption | once a year, or sooner if the pressure drop rises |
| Indicator or gauge | shows the pressure drop across the element | when the filter is installed |
| Condensate drain | drains the trapped water and oil from the filter bowl | on every filter that traps water |
| Connection kit | joins filters into a bank and fixes it to the wall | when several filters are lined up in series |
#showmore#
Why watch for a clogged element
A clogged element resists the air. The compressor then has to run longer and at a higher pressure to deliver the same power to the tools. An indicator or differential pressure gauge shows when a replacement pays off — before you notice the loss of pressure at the tools.
Why drain the condensate
The water and oil that the filter traps run down into the bowl. If they are not drained, the air carries them back into the pipework and the filter loses its purpose. That is why every filter that traps water needs a condensate drain.
- How often should the element be replaced?
- Most elements once a year, or sooner if the pressure drop rises. Activated carbon elements are replaced by time — their saturation does not show in the pressure drop.
- How do I find the right element?
- For Omega Air filters, the element has the same code as the filter with the letter V at the end: the AAFP-78 filter takes the AAFP-78V element.
- Is an indicator suitable for an activated carbon filter?
- No. A carbon element is replaced by time; the pressure drop tells you nothing about its condition.
You will find the filters themselves among the industrial compressed air filters.
Product sorting
List of products
The MDM40 magnetic differential pressure gauge fits on the filter head and shows the pressure drop across the element on a scale with a green and a red field. Up to 16 bar.
Spare element AAFM-120V for fine pre-filter AAFM-120. Recommended replacement every 12 months or 4,000 operating hours.
The PDI mechanical indicator fits on the filter head and shows by colour whether the element is clean (green) or clogged (red). Working pressure up to 16 bar.
The AOK16B float drain releases condensate automatically, with no electricity and no setting up. It is fitted inside the filter bowl. Up to 16 bar, 120 l/h at 7 bar.
Spare element AAFP-1000V for basic filter AAFP-1000. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFM-35V for fine pre-filters AAFM-35 and AAFM-60. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-78V for microfilter AAFS-78. Recommended replacement every 12 months or 4,000 operating hours.
Spare cyclone element AAFC-1000V for the AAFC-1000 cyclone separator. Recommended replacement every 12 months or 4,000 operating hours.
Parts for joining the filters and 2 brackets for wall mounting, for 3 AAF filters, sizes 35 to 120.
Spare cyclone element AAFC-198V for the AAFC-198 cyclone separator. Recommended replacement every 12 months or 4,000 operating hours.
Spare cyclone element AAFC-120V for the AAFC-120 cyclone separator. Recommended replacement every 12 months or 4,000 operating hours.
Spare cyclone element AAFC-510V for the AAFC-510 cyclone separator. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-120V for microfilter AAFS-120. Recommended replacement every 12 months or 4,000 operating hours.
The AK-12 connection kit joins filters with a 1/2" thread into one bank, and its bracket fixes the bank to the wall. Up to 20 bar.
Spare element AAFS-335V for microfilter AAFS-335. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFP-510V for basic filter AAFP-510. Recommended replacement every 12 months or 4,000 operating hours.
The AK-38 connection kit joins filters with a 3/8" thread into one bank, and its bracket fixes the bank to the wall. Up to 20 bar.
The AK-34 connection kit joins filters with a 3/4" thread into one bank, and its bracket fixes the bank to the wall. Up to 20 bar.
Parts for joining the filters into one bank through the holes in the head, for 3 AAF filters, sizes 35 to 120.
Manual condensate drain MCD in brass with a G 1/2" thread for filters, pressure vessels and cyclone separators. It opens with a turn. Up to 20 bar.
2 brackets and parts for wall mounting one AAF filter, sizes 35 to 120.
The MDHI 50 differential pressure gauge shows the pressure drop of the filter element on HF filters with pressures up to 50 bar. Range 0 to 1 bar, 2 × G 1/8" connection,...
Parts for joining the filters into one bank through the holes in the head, for 2 AAF filters, sizes 35 to 120.
The AK-15 connection kit joins filters with a 1 1/2" thread into one bank, and its bracket fixes the bank to the wall. Up to 20 bar.
Spare element AAFA-78V for activated carbon filter AAFA-78. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Parts for joining the filters into one bank through the holes in the head, for 2 AAF filters, sizes 198 to 780.
Parts for joining the filters into one bank through the holes in the head, for 3 AAF filters, sizes 198 to 780.
Spare element AAFMS2-120V for molecular sieve filter AAFMS2-120. Recommended replacement within 6 months at the latest, earlier depending on use.
The AOK13PA float drain releases condensate automatically, with no electricity and no setting up. It is fitted to the outside of the filter bowl. Up to 13 bar, 167 l/h at 7 bar.
Parts for joining the filters into one bank through the holes in the head, for 2 AAF filters, sizes 25 and 30.
Parts for joining the filters into one bank through the holes in the head, for 3 AAF filters, sizes 25 and 30.
Spare element AAFP-25V for basic filters AAFP-25 and AAFP-30. Recommended replacement every 12 months or 4,000 operating hours.
Spare cyclone element AAFC-60V for the AAFC-60 cyclone separator. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFA-120V for activated carbon filter AAFA-120. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFB-78V for coarse filter AAFB-78. Recommended replacement every 12 months or 4,000 operating hours.
Parts for joining the filters and 2 brackets for wall mounting, for 3 AAF filters, sizes 198 to 780.
2 brackets and parts for wall mounting one AAF filter, sizes 198 to 780.
Spare element AAFA-198V for activated carbon filter AAFA-198. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA-335V for activated carbon filter AAFA-335. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFB-198V for coarse filter AAFB-198. Recommended replacement every 12 months or 4,000 operating hours.



