BH profiles and accessories, Page 3
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Polyamide handle with dimensions 113x35 mm, orange colour.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Cover strip for closing the 60x60 channel profile.
Plastic handle cover 084.505.001, orange colour.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Square cover cap for corner connector 084.310.022 made of black polyamide.
Square cap for corner joint 084.310.022 made of grey polyamide.
Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.
Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.
Angle bracket for groove for connecting profiles of BH 30-8 and IM 40-8 series at a 90° angle.
PVC seal for profile groove to attach 1 mm thick panels into 8 mm wide grooves.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.
Handle made of black polyamide, dimensions 146x44 mm.
Square nut M4 for BH 30-8 and IM 40-8 slots, with guide.
Square nut M5 for BH 30-8 and IM 40-8 grooves, with guide.
Open polyamide handle with dimensions 130x48 mm, grey colour.
Short nut M5 for BH 30-8 slot, made of stainless steel.
Universal angle bracket with a 90° angle and dimensions of 59x59 for connecting profiles from the outside using M6x16 screws.
Plastic cap for semi-circular profiles 30x30 in grey
Rubber base pad insert with a diameter of 80 mm.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Angled solid handle made of grey polyamide, measuring 128x43 mm.
Aluminium hinge with dimensions 50x50, for profiles 30/30, 32/32.
Aluminium end cap for 60x60 channel profile.
Plastic cap for semi-circular profiles 30x30 in black
Handle made of black polyamide, dimensions 108x38 mm.
Magnetic stop for detachable door installation.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Plastic end cap for 60x60 profiles in black
Panel fixing block for thicknesses of 1 to 8 mm.
M18x0.75 threaded magnet for removable door installation.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
The 60x60 aluminium profile allows for the creation of channels with cables.
Door stop for removable door installation, made of brass.