BH profiles and accessories, Page 3
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Square nut M4 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.
Square nut M5 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of stainless steel
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimensions M8x20 made of galvanised steel
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of galvanised steel
Short nut M8 for BH 40-10, BH 45-10 and BH 50-10 slots, made of stainless steel.
Plastic handle cover 084.505.001, orange colour.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
A sliding latch with a spring for closing doors, made of polyamide.
Short nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10.
Short nut M6 for BH 40-10, BH 45-10 and BH 50-10 slots, made of stainless steel.
Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.
Handle made of black polyamide, dimensions 146x44 mm.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x35 made of galvanised steel
Open polyamide handle with dimensions 130x48 mm, grey colour.
Rubber base pad insert with a diameter of 80 mm.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x30 made of galvanised steel
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x40 made of galvanised steel
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Angled solid handle made of grey polyamide, measuring 128x43 mm.
Cover strip for closing channel profile 80x80.
Rubber base pad insert with a diameter of 100 mm.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x20 made of stainless steel
PVC seal for profile groove to attach 3 mm thick panels to grooves of AC 40-8, AC 45-8 and IM 40-8 series or 5 mm thick panels to grooves of BH 40-10, BH 45-10 and BH 50-10...
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Handle made of black polyamide, dimensions 108x38 mm.
Magnetic stop for detachable door installation.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Universal angle bracket with a 90° angle and dimensions of 38x36 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Panel fixing block for thicknesses of 1 to 8 mm.
M18x0.75 threaded magnet for removable door installation.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Door stop for removable door installation, made of brass.