BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Plastic end cap for 80x80 profiles in grey
Black plastic end cap for closing the groove of profiles in the BH 40-10, 45-10 and 50-10 series.
Washer for fixing glass panels to block 084.509.001.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Polyamide rotary latch for closing doors.
A sliding latch with a spring for closing doors, made of polyamide.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Door stop with dimensions 56x30 equipped with a magnet.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Door stop for removable door installation, made of brass.
Magnetic stop for detachable door installation.
A device for precise drilling of holes into aluminium profiles with BH 40-10 and BH 50-10 grooves.
Aluminium end cap for 80x80 duct profile.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 300 N force.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Gas spring with a stroke of 200 mm and a force of 250 N.
Gas spring with a stroke of 200 mm and a force of 350 N.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Blanking plug for 7.5 mm hole, made of black polyamide.
Blanking plug for 7.5 mm hole, made of grey polyamide.
The 80x80 aluminium profile allows for the creation of cable channels.