BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Square nut M6 for BH 30-8 and IM 40-8 slots, equipped with guide and perpendicularly positioned spring.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Magnetic stop for detachable door installation.
Multi-purpose profile with a height of 23.5 mm for profiles with a groove series BH 30-8 and IM 40-8.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
M18x0.75 threaded magnet for removable door installation.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Gas spring with a stroke of 200 mm and a force of 350 N.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Door stop for removable door installation, made of brass.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Cover strip for closing channel profile 80x80.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Handle made of black polyamide with dimensions of 129x44 mm.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
The 80x80 aluminium profile allows for the creation of cable channels.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Handle made of black polyamide, dimensions 146x44 mm.
Aluminium end cap for 80x80 duct profile.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Adjustable foot 40x100 mm with M8 thread
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.