BH profiles and accessories, Page 3
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Plastic cap for bases 084.409.004 and 084.409.002.
Connector for creating a swivel joint between profiles with a 40x80 section.
Square base for mounting on 80x80 section profiles.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Adjustable foot 40x100 mm with M8 thread
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Universal angle bracket with a 90° angle and dimensions of 78x78 for connecting profiles from the outside using M8x20 screws.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Rubber base pad insert with a diameter of 100 mm.
Rubber base pad insert with a diameter of 80 mm.
Washer for fixing glass panels to block 084.509.001.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Polyamide rotary latch for closing doors.
A sliding latch with a spring for closing doors, made of polyamide.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Door stop with dimensions 56x30 equipped with a magnet.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Door stop for removable door installation, made of brass.
Magnetic stop for detachable door installation.
Aluminium end cap for 80x80 duct profile.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.