BH profiles and accessories, Page 2

Plastic end cap for 18x40 angle bracket in black.

Square nut M8 for BH 30-8 and IM 40-8 slots, equipped with guide and perpendicularly positioned spring.

Plastic end cap for 18x40 angle bracket in grey.

Blanking plug for 13 mm hole, made of grey polyamide.

Universal angle bracket with a 90° angle and dimensions of 25x40 for connecting profiles from the outside using M8x20 screws.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Universal angle bracket with a 90° angle and dimensions of 28x27 for connecting profiles from the outside using M6x16 screws. Design with guide tabs.

Rubber insert for stop pin 084.523.003.

Universal angle bracket with a 90° angle and dimensions of 18x40 for connecting profiles from the outside using M8x20 screws.

Clip for securing cables to aluminium profiles.

Plastic handle cover 084.505.001, orange colour.

Shimming base for block 084.510.001 with a height of 3 mm.

Spacing base for block 084.510.001 with a height of 2 mm.

Spacing base for block 084.510.001 with a height of 5 mm.

Polyamide handle with dimensions 113x35 mm, blue colour.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.

Polyamide handle with dimensions of 113x35 mm, black colour.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Polyamide handle with dimensions 113x35 mm, orange colour.

Plastic end cap for 50x50 profile in black

Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.

Rubber base pad insert with a diameter of 40 mm.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Floor bracket for mounting on 40 mm wide profiles using M8 screws.

Open polyamide handle with dimensions 130x48 mm, grey colour.

Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.

Square nut M4 for BH 30-8 and IM 40-8 slots, with guide.

Square nut M5 for BH 30-8 and IM 40-8 grooves, with guide.

Square nut M6 for BH 30-8 and IM 40-8 grooves, with guide.

Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.

Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.

Square nut M4 for BH 30-8 and IM 40-8 grooves, equipped with guide and perpendicularly positioned spring.

Angle bracket for joining profiles with a 40x40 section at a 45° angle.

Rubber base pad insert with a diameter of 50 mm.

Handle made of black polyamide, dimensions 108x38 mm.

Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.

Cover strip for closing channel profile 80x80.

Panel fixing block for thicknesses of 1 to 8 mm.

Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.