Metal pressure regulator DM14 up to 18 bar - G 1/4" G 1/4" · up to 18 bar · 650 l/min · 94 × 42 mm
Code: DM14
Related products
Product detailed description
A metal pressure regulator with a G 1/4" thread and a flow of 650 l/min. It reduces an inlet pressure of up to 18 bar to a value from 0 to 12 bar set with the knob and holds it even when the line pressure fluctuates.
Specifications
| DM14 — specifications | |
|---|---|
| Type | Pressure regulator |
| Connection | G 1/4" female thread |
| Body size | 1 (body width 42 mm) |
| Inlet pressure | up to 18 bar |
| Pressure setting range | 0 to 12 bar |
| Setting lock | knob lock |
| Flow | 650 l/min |
| Height × width | 94 × 42 mm |
| Pressure gauge | not included, G 1/8" port |
| Material | zinc alloy |
| Working temperature | −10 to +50 °C |
| Medium | compressed air |
What it is for
It suits places where the air line pressure is higher than a tool or machine can take and where standard units rated for 10 bar are not enough. The G 1/4" thread is suitable for a single tool or a smaller machine.
The pressure gauge is not included; MZ01-15 fits. You can fix the regulator to a wall with the bracket UUK1. The filter regulator in one body is FDM14.
Ventilek’s tip
Set the pressure from below. First back the knob off below the value you need, then turn it up slowly until the gauge shows what you need. Finally, secure the setting with the knob lock.
Additional parameters
| Category: | Robust metal air treatment units I8 up to 18 bar |
|---|---|
| Version: | Pressure regulator |
| Pressure: | 18 bar |
| Dimensions: | 94 × 42 mm |
| Medium: | Compressed air |
| Working temperature: | -10 / 50 °C |
| Flow: | 650 l/min |
| Regulatory range: | 0 - 12 bar |
| Thread: | G 1/4" |
| Thread for manometer: | 1/8" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company employs more than 700 peopleThe company Metal Work has been engaged in the production of devices for treating compressed air and fittings since 1967, when it first started its operations. Since then, the Italian manufacturer has evolved over several decades to finally become one of the leading tyre manufacturers. Today, it employs over 350 people at its plant, with another 4 hundred working in its Italian and foreign offices. Expert and competent advice and availability of services is ensured by our extensive network of 46 branches in Italy and abroad, with which we cooperate. Currently, you can find the brand Metal Work on the following products: actuators, valves, adjustment units, fittings and accessories and pneumatic actuator KIT. |
 |
 |
The certificate guarantees quality assurance
Over the years, the entire production process has increased in quality to such an extent that the brand has become synonymous with certainty and quality in its field. In advance, the development department ensures that the most advanced technologies that the market will require in the future are always taken care of with confidence. The quality of the products themselves was certified by the German DEKRA (TGA) when their products were awarded ISO 9001 certification in 1992. Another certificate, this time in the environmental field, was obtained by the company in accordance with ISO 14001 in 2001.