Compressed Air Moisture Removal Air Dryers
Air dryers help you get rid of condensation. These devices, which are connected behind the compressor, are an integral part of the compressed air treatment programme. We offer you three types of dryers - condensing, absorption and membrane dryers. By installing them , you can multiply the lifetime of connected pneumatic tools, blow or spray guns or automated line components such as cylinders and valves. Less servicing costs for these connected devices will please any air compressor operator. Differences between dryers and article why and mainly how to dry compressed air can be found here.
#ShowMore#
How to choose the right type of air dryer?
Condensation dryers
The most sought-after type for drying compressed air for workshops and most industrial areas. Well-known manufacturers include Hanksion and the international Mark Compressors or Omega Air. In condensation dryers, the compressed air is first cooled to a temperature below the pressure dew point. As a result, the water vapour in the air condenses and turns into water. This is removed from the air using a condensate drain.
Advantages of condensation dryers
- they are inexpensive
- operate without loss of compressed air
Disadvantages of condensing dryers
- the dew point can be lowered to a temperature of only +5 °C or +3 °C
- power consumption for running the fan, control system and refrigerant compressor.
- effective ventilation must be ensured
Adsorption dryers
Slightly more expensive but highly efficient dryers for industrial plants with high air quality requirements. Their hallmark is two towers filled with drying material. The drying material must be highly porous, most often activated alumina alumogel (Al2O3) or silica gel (SiO2) is used. Omega Air, for example, manufactures adsorption compressed air dryers.
Advantages of adsorption dryers
- the dew point can be lowered to a lower temperature, depending on the drying material used, typically -25°C, -40°C or up to -75°C
Disadvantages of adsorption dryers
- adsorption dryers consume up to 20% of the supplied compressed air
- it is necessary to change the drying material cartridges regularly
Membrane dryers
This type of dryer resembles a test tube with a stopper on each side. Membrane dryers are folded a bundle of hollow fibres (membranes) through which moist compressed air flows from top to bottom. As it passes through, the moisture is forced out through the membranes and the air exits the fibre dry. They are designed for compressed air supply with low dew point at low flow rates. Omega Air is also among the leading manufacturers.
Advantages membrane dryers
- minimum installation dimensions
Disadvantages of membrane dryers
- membrane dryers consume 10-30% of the supplied compressed air
*Does it seem financially costly to purchase a quality dryer for your compressor? The truth is that all these devices always pay for themselves over time. This saves every part of the compressor system, which can operate reliably and without service intervention for a long time and, above all, extremely efficiently.
Don't forget about other air treatment accessories:
-
RDP condensation dryers; pressure dew point +3 °C
-
Condensation dryers WDF; dew point +3°C with filters
-
HDI air dryers; pressure dew point +4°C
-
RDL condensing dryers; pressure dew point +5°C
-
ADRY air dryers; smaller adsorption -40°C
-
BDRY air dryers; large adsorption -40°C
-
MADRY air dryers; membrane -40°C
-
Activated carbon columns; activated carbon separation
.jpg)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
.jpg)
Product sorting
List of products
Bypass piping for MDX400 to 1800 condensation dryers for easy replacement of filter cartridges without the need for shutdown.Simple assembly during dryer installation. The...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G 3/4" male thread. The...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-24 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-60 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-36 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
The ADRY-12 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 200 l/min. Reduces the pressure dew point...
Measuring chamber for dew point sensor - for regeneration air saving - ADRY-MK. A-DRY dryers can operate in two operating modes depending on the settings of the control unit....
After one year of operation, the ADRY-105 series Omega Air adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
Condensation dryer for compressed air to +3°C dew point. The maximum input pressure is 14 bar with a flow rate of up to 50 m³/h (833 l/min) and a G1" external thread connection....
Bypass or bypass pipe for Omega Air compressed air dryers RDP-50/RDT-50 to RDP-100/RDT-100 for easy maintenance and servicing of the machine.
Service KIT after 4 years of operation of the adsorption dryer Omega Air series ADRY-36 includes replacement filter cartridges, silencers, check valve, gaskets, valve kit,...
Condensation dryer for compressed air to +3°C dew point. Maximum inlet pressure is 14 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external G3/4"...
Dew point sensor including cable - for air saving regeneration - BDRY-OS. B-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G 1/2"....
Measuring chamber for dew point sensor - for regeneration air saving - BDRY-MK. B-DRY dryers can operate in two operating modes depending on the settings of the control unit....
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-150 to ADRY-200 includes a replacement microfilter cartridge, dust filter and...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-12 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Bypass or bypass piping for Omega Air compressed air dryers RDP-140/RDT-140 to RDP-235/RDT-235 for easy maintenance and servicing of the machine.
Bypass or bypass pipe for Omega Air RDP-20/RDT-20 and RDP-35/RDT-35 compressed air dryers for easy maintenance and servicing of the machine.
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-150 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-200 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...
The ADRY-150 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 2,500 l/min. Reduces the pressure dew point...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
Bypass or bypass piping for Omega Air compressed air dryers RDP-300/RDT-300 and RDP-380/RDT-380 for easy maintenance and servicing of the machine.
Bypass or bypass pipe for Omega Air RDP-480/RDT-480 compressed air dryers for easy maintenance and servicing of the machine.
Bypass or bypass piping for Omega Air RDP-600/RDT-600 and RDP-950/RDT-950 compressed air dryers for easy maintenance and servicing of the machine.
The WDF-70 condensing air dryer provides efficient moisture removal from compressed air with a flow rate of 70 m³/h (1,166 l/min) and a pressure dew point of +3 °C. Thanks to...
The WDF-155 condensing air dryer effectively removes moisture from compressed air and achieves a pressure dew point of +3 °C. With a flow rate of 155 m³/h (2 583 l/min), it is...
The WDF-53 condensing air dryer efficiently removes moisture at a flow rate of 53 m³/h (883 l/min) and reaches a dew point of +3 °C. Integrated 1 µm and 0.01 µm filters ensure...
The WDF-100 condensing air dryer provides efficient compressed air drying with a flow rate of 100 m³/h (1 667 l/min) and a pressure dew point of +3 °C. Integrated filters of 1...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-6 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-75 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Adsorption dryer BDRY-600 designed for continuous separation of water vapour from compressed air with a flow rate of up to 7,708 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-800 designed for permanent separation of water vapour from compressed air with a flow rate of up to 10 058 l/min at a maximum pressure of 16 bar and...
The FDRY-5000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 65,000 l/min at a maximum pressure of 16 bar...
The FDRY-6500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 84,500 l/min at a maximum pressure of 16 bar...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
The FDRY-1500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 19,500 l/min at a maximum pressure of 16 bar...