Compressed air treatment: filtration, drying and pressure regulation, Page 24
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
A metal guard for the plastic bowl of a size 2 COMBIBLOC unit. It protects the bowl from impact, and the level remains visible. It suits places where something could hit the...
The EPG60 electronic indicator monitors the condition of the filter element by pressure drop, operating hours or both, and reports when to replace it. A basic version for local...
The EPG60-SN electronic indicator monitors the condition of the filter element by pressure drop, operating hours or both, and reports when to replace it. A version connected to...
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFB-198 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
DRPE proportional pressure regulator: you set the outlet pressure by a 0–10 V electrical signal from the control system.control range 0–6 bar, inlet pressure max. 11.4...
High flow silencer with external pipe thread G 1/4" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
With a G 3/4" thread and a flow of 2,000 l/min at 7 bar, the AAFP-120 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
With a G 1/4" thread and a flow of 417 l/min at 7 bar, the AAFP-25 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
With a G 3/8" thread and a flow of 500 l/min at 7 bar, the AAFP-30 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
With a G 3/8" thread and a flow of 1,000 l/min at 7 bar, the AAFP-60 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
Spare element AAFR-510V for dust filter AAFR-510. Recommended replacement every 12 months or 4,000 operating hours.
3/2 valve FUTURA MCL10-F230VAC, size 4: G 1" thread, flow 12,500 l/min, 230 V AC coil, inlet pressure up to 10 bar.
Air-operated 3/2 valve FUTURA PCL10-F, size 4: G 1" thread, flow 12,500 l/min, inlet pressure up to 16 bar, for ATEX environments.
Two-piece B2 compressed air treatment unit with a G 3/4" thread: pressure regulator with 20 µm filter and lubricator. Inlet pressure up to 18 bar, setting 0 to 12 bar, flow 4600...
A bracket with ring and nut for mounting a FUTURA pressure regulator or filter regulator in a panel. The ring fits over the knob and is tightened with the nut. It suits places...
With a G 1/4" thread and a flow of 417 l/min at 7 bar, the AAFR-25 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16 bar.
With a G 1/4" thread and a flow of 417 l/min at 7 bar, the AAFM-25 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1 mg/m³....
With a G 3/8" thread and a flow of 500 l/min at 7 bar, the AAFM-30 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1 mg/m³....
Soft-start unit FUTURA BFMCL38-230VAC, size 1: G 3/8" thread, flow 1,300 l/min, 230 V AC coil, inlet pressure up to 10 bar.
Soft-start valve FUTURA BF10-F, size 4: G 1" thread, flow 10,000 l/min, inlet pressure up to 16 bar, for ATEX environments.
Service kit ADRY-60-2R for maintaining the ADRY-60 desiccant dryer after 2 years of operation. It contains filter elements, silencers, non-return valve and seals.
Large EWO diaphragm pressure regulator with secondary venting for compressed air and neutral gases.connection G 1 1/2" (reducers supplied with the G 2" body), DN 50control range...
Large EWO diaphragm pressure regulator with secondary venting for compressed air and neutral gases.connection G 2", DN 50control range 0.5–25 bar, inlet pressure up to 40...
Pressure regulator FUTURA R34-16F, size 4: G 3/4" thread, setting range 0.5–16 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R34-1F, size 4: G 3/4" thread, setting range 0.1–1 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R34-2F, size 4: G 3/4" thread, setting range 0.1–2 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R34-4F, size 4: G 3/4" thread, setting range 0.2–4 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R34-8F, size 4: G 3/4" thread, setting range 0.5–8 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
A replacement double polycarbonate bowl for a size 2 COMBIBLOC unit: 75 cm³ filter bowl, inner 150 cm³ lubricator bowl, manual condensate drain. A replacement for a damaged or...
Metal B2 compressed air lubricator (air line oiler) with a G 1/2" thread, inlet pressure up to 18 bar and a flow of 4500 l/min. The oil dose is set with the screw on top;...
With a G 3/8" thread and a flow of 1,000 l/min at 7 bar, the AAFS-60 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
Soft-start unit FUTURA BFMCL382-230VAC, size 2: G 3/8" thread, flow 3,400 l/min, 230 V AC coil, inlet pressure up to 10 bar.
Spare element AAFR-780V for dust filter AAFR-780. Recommended replacement every 12 months or 4,000 operating hours.
Spare element HFR-018V for the HFR-018 dust filter with a G 1" thread. Recommended replacement at least once a year or at a pressure drop of 350 mbar.
EWO in-line high-pressure regulator for compressed air, nitrogen and other neutral gases.inlet pressure up to 200 barcontrol range 1–150 barflow rate 3,153 l/min, connection G...