Compressed air treatment: filtration, drying and pressure regulation, Page 43
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
Filter housing AAF-2160T — head and bowl without element, with a G 3" thread and a flow of 36,000 l/min at 7 bar. You choose the element of any stage separately.
EWO diaphragm pressure regulator with secondary venting for compressed air and neutral gases.connection G 3/8"control range 0.5–16 bar, inlet pressure up to 25 barflow rate...
A complete replacement sealing cone for the pressure regulator valve of STANDARD BG 60 units. If the regulator slowly raises the pressure after setting or does not close...
FDRY-1200 desiccant dryer for 1,200 Nm³/h (20,000 l/min) of compressed air, DN50 connection. Pressure dew point −40 °C, working pressure 4 to 16 bar, inlet microfilter and...
Spare element CF-12 with a black end cap for the Hankison F12-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
Spare element CF-13 with a black end cap for the Hankison F13-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
Spare element CF-14 with a black end cap for the Hankison F14-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
Spare element CF-15 with a black end cap for the Hankison F15-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
Spare element CF-16 with a black end cap for the Hankison F16-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
Spare element CF-17 with a black end cap for the Hankison F17-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
EWO piston pressure regulator with secondary venting for compressed air and neutral gases with inlet pressure up to 60 bar.connection G 1/4" (reducers from G 3/8"...
Spare cyclone element IHPC-005V for the IHP1C-005, IHP2C-005 and IHP4C-005 cyclone separators. The separator has no filter element — the cyclone element is its separating part.
Spare cyclone element IHPC-007V for the IHP1C-007, IHP2C-007 and IHP4C-007 cyclone separators. The separator has no filter element — the cyclone element is its separating part.
Spare cyclone element CHPC-005V for the CHP1C-005, CHP2C-005 and CHP4C-005 cyclone separators. The separator has no filter element — the cyclone element is its separating part.
Spare cyclone element CHPC-007V for the CHP1C-007, CHP2C-007 and CHP4C-007 cyclone separators. The separator has no filter element — the cyclone element is its separating part.
Spare cyclone element CHPC-010V for the CHP1C-010, CHP2C-010 and CHP4C-010 cyclone separators. The separator has no filter element — the cyclone element is its separating part.
With a G 1/4" thread and a flow of 566 l/min, the Hankison NGF F02-B-UF ultra-fine microfilter traps particles larger than 0.01 µm and removes oil down to a residual content...
WALTER WDF-38 refrigeration dryer for compressed air with a built-in 1 µm pre-filter and 0.01 µm fine filter. Pressure dew point +3 °C (water class 4), flow rate 38 m³/h (633...
Service kit ADRY-12-4R for maintaining the ADRY-12 desiccant dryer after 4 years of operation. It contains filter elements, silencers, valve set, desiccant and seals.
Service kit ADRY-24-4R for maintaining the ADRY-24 desiccant dryer after 4 years of operation. It contains filter elements, silencers, valve set, desiccant and seals.
Spare element AAFB-35V for coarse filters AAFB-35 and AAFB-60. Recommended replacement every 12 months or 4,000 operating hours.
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFS-198 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
Spare 0.1 µm medical element for M-VAC vacuum filters.
BDRY-110-1R service kit for maintaining the BDRY-110 and BDRY-150 desiccant dryers after 1 year of operation. It contains inlet microfilter and outlet dust filter elements and...
BDRY-200-1R service kit for maintaining the BDRY-200 and BDRY-250 desiccant dryers after 1 year of operation. It contains inlet microfilter and outlet dust filter elements and...
BDRY-300-1R service kit for maintaining the BDRY-300 and BDRY-400 desiccant dryers after 1 year of operation. It contains inlet microfilter and outlet dust filter elements and...