Compressors without air dryer, Page 3

Separate A39 compressor units with an input power of 2.2 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Delivery including...

Separate A39B compressor units with an input power of 3 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Supplied with...

Separate compressor units A49B with an input of 4 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Supplied with impeller for...

Three-cylinder cast iron unit 3.0 kW with a delivery rate of 440 l/min on a compact 100 l air receiver. Full class performance in the smallest horizontal configuration, 400 V.

WALTER Universal Workshop Compressor: three-cylinder 3.0 kW with a displacement of 440 l/min and a 200 l air receiver. Storage and power in the recommended ratio, 400 V.

Horizontal cast-iron compressor with a 3W three-cylinder unit, power input 5.5 kW and delivery rate 740 l/min at 10 bar and 902 rpm. 270 l air receiver on wheels, 400 V, 3-year...

Three-cylinder cast iron unit 5.5 kW with a displacement of 740 l/min at 10 bar on a horizontal air receiver 500 l. Double the air reserve and approximately half the number of...

Professional V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated version...

Portable oil-free compressor 1.5 kW with 256 l/min in the 6-litre version, 17 kg. For a stapler, blowing off and a gun wherever you carry the compressor.

Professional piston compressor with V-belts with an output pressure of 10 bar designed for use in craft and professional applications. Mobile oil-lubricated design with a motor...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 2 000 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

The best output-to-input ratio in the range: 8 % more power than the 3 kW but 59 % more air. 510 l/min, same enclosure and weight.

The most powerful machine in the range without a receiver — 696 l/min, twice the 3 kW. Still 180 kg and a 650 × 600 × 860 mm enclosure.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

ABAC Super Silent series reciprocating compressor with a noise level of only 59 dB. Machine output 94 l/min at 1.5 kW at 230V. Compact lightweight oil-free direct drive...

Power input 2,2 kW, suction power 393 l/min, pressure 10 bar, airbox 100 l, voltage 230/50 V/Hz. Professional V-belt reciprocating compressor with an output pressure of 10 bar...

SEC 300 Vario · 30 kW · displacement 4.5 / 4 / 3.3 m³/min · pressure 8 / 10 / 13 bar. 30 kW Vario with frequency inverter — 20–30% savings in operations...