Micro-lubricator FUTURA OL014-F - G 1/4" 1,400 l/min · size 0
Code: OL014-F OL014-F-M Choose variant
Related products
Product detailed description
The lubricator adds oil to compressed air as a fine mist, which the air carries to tools, cylinders and valves. You set the oil quantity with the dosing screw and check it by counting the drops.
Specifications
| OL014-F — specifications | |
|---|---|
| Type | Micro-lubricator |
| Connection | G 1/4" female thread |
| Size | 0 (module width 43 mm) |
| Inlet pressure | 0–12 bar |
| Flow | 1,400 l/min |
| Min. flow for oiling (at 6 bar) | 26 l/min |
| Oil capacity | 35 cm³ |
| Oil dosing | about 10–20 drops per minute at 1,000 l/min |
| Oil filling | manually |
| Bowl | plastic, metal as a variant |
| Width × height | 43 × 156 mm |
| Material | glass-fibre reinforced polyamide body, NBR seals |
| Working temperature | −10 to +50 °C |
| Medium | compressed air and neutral gases |
| Potentially explosive atmospheres | no |
Versions
Choose the version at the top of the page. Each version has its own order number.
What it is for
It goes last in the assembly, after the filter and regulator, for tools and actuators that need lubrication. It is not for spraying. Size 0 is suitable for individual machines and tools with lower air consumption.
Parts for this size: replacement bowl BDO00, BDO00-M · bowl sealing ring OR1 · sight dome TROPFOLF · oil SOL, SOLWI, SOLLE · mounting bracket W0F · connection kit KP0F · connection kit with wall bracket KPW0F · threaded wall brackets WK0-14F.
Potentially explosive atmospheres
Size 0 is not for use in potentially explosive atmospheres.
Ventilek’s tip
Less oil is more. Start at the smallest dose and add more only when the tool runs dry.
Additional parameters
| Category: | FUTURA lubricators for ATEX environments up to 16 bar |
|---|---|
| Version: | Automatic lubricator |
| Pressure: | 12 bar |
| Dimensions: | 43 × 156 mm |
| Medium: | Compressed air |
| Vessel volume: | 35 cm³ |
| Working temperature: | -10 / 50 °C |
| Flow: | 1 400 l/min |
| Thread: | G 1/4" |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
From the basement to the worldThe German company KNOCKS FLUID Technik was founded as a family business in 1970. The company, which in its early days was run by its founder in the basement of his house, has grown into one of the leaders in the compressed air industry in less than 50 years. But the company continues to keep pace, and year after year its ranks have grown, while the development of new technologies has not been overlooked. But it wasn't just the desire for expansion, but also the desire for excellence that kept the company going. In 2004, the certification according to ISO 9001: 2000 came quite logically. The complete production of the entire product range is carried out at the company's headquarters in Selm, where, for example, proportional regulators, various types of couplings, pressure regulators, as well as silent blocks are produced. |
 |
 |
Modern technologies sanctify qualityFrom a one-man enterprise, it is now a company of 140 employees who are responsible for the quality of its products. This is helped by state-of-the-art tools and technologies such as production machines and QA systems, electronic test benches or 3D CAD systems. The KNOCKS brand is now an internationally sought-after brand with sales offices all over the world. Kompresory vzduchotechnika s.r.o. is one of them. A wide range of products from this popular brand can be found below. |