FUTURA air treatment units for ATEX environments up to 16 bar

FUTURA is a modular compressed air treatment range for an inlet pressure of up to 16 bar. The regulators, filters, lubricators, units and valves have corrosion-free bodies of glass-fibre reinforced polyamide and are designed as equipment with no ignition source of its own for potentially explosive atmospheres.
The range has four sizes with G 1/4" to 1" threads. Components of the same size are joined with connection kits into one unit in any combination, and a valve, a soft-start valve or a manifold module can also be added.
What you will find in the FUTURA range

Pressure regulators
Reduce the air line pressure to the set value and hold it. Also precision regulators and regulators for several circuits.

Filters and microfilters
Filter 5 µm, pre-filter 0.3 µm, microfilter 0.01 µm and an activated carbon filter against odours and oil vapours.

Shut-off and switching valves
Manual ball valve with exhaust and 3/2 valves, electrically or air-operated.

Soft-start, check and manifold
Soft-start valves for gradual pressure build-up, check valves and manifold modules with pressure switch.

Accessories and parts
Connection kits, mounting brackets, bowls, filter elements, diaphragms, pressure gauges and drains.
Four sizes

The size determines the flow, the dimensions and which parts and connection kits belong to the component. Only components of the same size can be joined into one unit.
| FUTURA range sizes | ||||||
|---|---|---|---|---|---|---|
| Size | Threads | Regulator flow (l/min) | Regulator width × height (mm) | Panel mounting | Mounting bracket | Connection kit |
| 0 | G 1/4" | 1,000 | 43 × 88 | M 30 × 1.5 | W0F | KP0F |
| 1 | G 1/4" and 3/8" | 2,000 / 2,500 | 52 × 129 | M 36 × 1.5 | W1F | KP1F |
| 2 | G 3/8" and 1/2" | 4,500 / 5,200 | 63 × 149 | M 42 × 1.5 | W2F | KP2F |
| 4 | G 3/4" and 1" | 14,200 | 85 × 191 | M 50 × 1.5 | W4F | KP4F |
Within a size, the regulator flow is higher for the larger thread (1/4" and 3/8", 3/8" and 1/2"). Size 0 has a maximum inlet pressure of 12 bar, the others 16 bar.
#showmore#
Bowl and condensate drain
Filters, filter regulators and units come in several versions. They differ in the bowl and in how the condensate is drained from it. You choose them as a variant on the product page.

Plastic bowl with guard
Transparent polycarbonate bowl in a protective guard. You can see the whole condensate level.

Metal bowl
A more robust metal bowl with a sight glass (without a sight glass in size 0) for more demanding environments.

Semi-automatic drain
The condensate drains by itself when the pressure in the bowl drops, and manually at any time during operation.

Automatic drain
A float releases the condensate by itself as soon as it rises. The “closed when depressurised” version stays closed after the air is switched off.
Potentially explosive atmospheres

FUTURA components are mechanical devices with no ignition source of their own. According to the declaration regarding Directive 2014/34/EU, you can use them in zones 1 and 2 with explosive gases (groups IIA, IIB and IIC) and in zones 21 and 22 with combustible dust (groups IIIA and IIIB), temperature class T4. This makes them suitable for paint shops, joinery workshops, mills or chemical plants.
Because they have no ignition source of their own, the directive requires neither an ATEX label nor a certificate for them. The declaration regarding Directive 2014/34/EU applies to them, and we will send it to you on request. The declaration applies to sizes 1, 2 and 4. Size 0, electrically operated valves and soft-start units, manifold modules with pressure switch and filter clogging indicators are not for use in potentially explosive atmospheres.
In potentially explosive atmospheres, observe these conditions:
- Connect the components to the equipotential bonding.
- Generate and treat the compressed air outside the potentially explosive area. The medium may only be dry compressed air or an inert gas.
- Plastic parts can become electrostatically charged. Clean them only with a damp cloth and do not place the components where strong electrostatic charges are generated.
- In zone 1 with gas group IIC, the plastic surface of a component may be at most 20 cm², in group IIB and in dust at most 100 cm².
- Use insulated supply hoses up to a diameter of 20 mm for group IIC and up to 30 mm for groups IIA, IIB and for dust.
- Release air into the potentially explosive area only in a dispersed way, not as a concentrated jet. Remove settled dust regularly.
- Repairs and modifications of components operated in potentially explosive atmospheres are not permitted.
Assembling a unit

You join components of the same size with a connection kit: two frames with screws and a sealing ring. The connection kit with bracket also fixes the unit to a wall. A single component is held on the wall by a mounting bracket; regulators can also be built into a panel with a nut.
In the direction of air flow, the filter comes first, followed by the regulator and finally the lubricator. You can place a shut-off valve and a soft-start valve before them. An oil-free branch is made with a manifold module before the lubricator.
Maintenance

Clean plastic bowls only with a damp cloth and water or a mild detergent. Solvents and aggressive cleaning agents damage polycarbonate.
Filter elements gradually clog and need replacing. On the lubricator, watch the oil level and top it up when it drops to the lower mark.
Other air treatment unit ranges
Where there is no requirement for potentially explosive atmospheres, B2 metal units up to 18 bar, I8 robust units up to 18 bar or A2 basic units up to 10 bar are suitable. You will find all ranges in the air treatment unit overview.
Ventilek’s tip
One modular system for the entire air line. When you build air treatment for a paint shop or another potentially explosive atmosphere, you can assemble exactly the configuration you need from the FUTURA range — from the shut-off valve through the filter and regulator to the manifold module.
- What inlet pressure can the FUTURA range take?
- Up to 16 bar, size 0 up to 12 bar. The working temperature is −10 to +50 °C.
- What media is it designed for?
- For lubricated or non-lubricated compressed air and neutral gases.
- What do sizes 0, 1, 2 and 4 mean?
- The body size. It determines the flow and the parts that belong to the component. Only components of the same size are joined into one unit.
- Is it suitable for potentially explosive atmospheres?
- Yes, for zones 1 and 2 (gases IIA, IIB, IIC) and 21 and 22 (dust IIIA, IIIB) according to the declaration regarding Directive 2014/34/EU, under the conditions given above. This applies to sizes 1, 2 and 4, not to size 0 or electrically operated components.
- Do the products have an ATEX certificate?
- No, and they do not need one. They are mechanical devices with no ignition source of their own, for which the directive requires neither a certificate nor an ATEX label. The declaration regarding Directive 2014/34/EU applies to them, and we will send it to you on request.
- What are the bodies made of?
- Glass-fibre reinforced polyamide. They do not corrode, even with water in the air line.
- How are the components joined?
- With a connection kit with frames and a sealing ring; to a wall with a connection kit with bracket or a mounting bracket.
Inlet pressure up to 16 bar (size 0 up to 12 bar), working temperature −10 to +50 °C, lubricated or non-lubricated compressed air and neutral gases. Bodies of glass-fibre reinforced polyamide, female threads G 1/4" to G 1".
Product sorting
List of products
Soft-start unit FUTURA BFMCL014-24VDC, size 0: G 1/4" thread, flow 1,300 l/min, 24 V DC coil, inlet pressure up to 10 bar.
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
The mounting bracket with screws fixes a single FUTURA component to a wall or machine frame. Remove the rear cover plate of the component before mounting. The bracket holds the...
A nut for mounting a FUTURA pressure regulator or filter regulator in a panel. Push the regulator through the hole and screw the nut on over the knob. It suits building a...
3/2 valve FUTURA MCL38-F230VAC, size 1: G 3/8" thread, flow 2,000 l/min, 230 V AC coil, inlet pressure up to 10 bar.
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
A bracket with ring and nut for mounting a FUTURA pressure regulator or filter regulator in a panel. The ring fits over the knob and is tightened with the nut. It suits places...
Pressure regulator FUTURA R14-1F, size 1: G 1/4" thread, setting range 0.1–1 bar, flow 2,000 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
A replacement sealing ring for the bowl of a FUTURA filter, filter regulator or lubricator. Replace it when the bowl leaks or the ring is damaged.
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
A bracket with ring and nut for mounting a FUTURA pressure regulator or filter regulator in a panel. The ring fits over the knob and is tightened with the nut. It suits places...
A nut for mounting a FUTURA pressure regulator or filter regulator in a panel. Push the regulator through the hole and screw the nut on over the knob. It suits building a...
A nut for mounting a FUTURA pressure regulator or filter regulator in a panel. Push the regulator through the hole and screw the nut on over the knob. It suits building a...
A replacement knob for FUTURA pressure regulators and filter regulators. It serves as a replacement for a damaged or lost knob.
A replacement sealing ring for the bowl of a FUTURA filter, filter regulator or lubricator. Replace it when the bowl leaks or the ring is damaged.
A replacement sealing ring for the bowl of a FUTURA filter, filter regulator or lubricator. Replace it when the bowl leaks or the ring is damaged.
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
A nut for mounting a FUTURA pressure regulator or filter regulator in a panel. Push the regulator through the hole and screw the nut on over the knob. It suits building a...
A replacement sealing ring for the bowl of a FUTURA filter, filter regulator or lubricator. Replace it when the bowl leaks or the ring is damaged.
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
Pressure regulator FUTURA R38-2F, size 1: G 3/8" thread, setting range 0.1–2 bar, flow 2,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R10-1F, size 4: G 1" thread, setting range 0.1–1 bar, flow 14,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
A replacement bowl for FUTURA lubricators and units. It serves as a replacement for a damaged lubricator bowl.
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
A replacement bowl for FUTURA activated carbon filters. It has no drain, because the activated carbon filter does not drain condensate. It serves as a replacement for a damaged...
A replacement FUTURA regulator diaphragm with control piston and sealing ring. Use it when the regulator does not hold pressure or vents continuously. In potentially explosive...
Ball valve with exhaust FUTURA K014-F, size 0: G 1/4" thread, flow 2,300 l/min, inlet pressure up to 12 bar.
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.
A replacement bowl for FUTURA lubricators and units. It serves as a replacement for a damaged lubricator bowl.
The mounting bracket with screws fixes a single FUTURA component to a wall or machine frame. Remove the rear cover plate of the component before mounting. The bracket holds the...
Manifold module FUTURA VBCL014-F, size 0: G 1/4" thread, flow 2,700 l/min, side ports top and bottom, G 1/4", inlet pressure up to 12 bar.



