Pressure regulator directly on the air tank - 1/2"
Code: RTV-12Related products
The first two-stage machine in the category: eleven bar and cooler compression, yet still in the lowest assembly. An L1 cabinet on a 270 l receiver, 248 kg.
The same three-kilowatt pump as in the low assembly, but in the taller L2 cabinet with the controls on a separate column. The lightest machine in the category — 238 kg on a 270...
A two-stage machine in the smallest cabinet: 11 bar and thirty per cent more air than its single-stage neighbour. The L1 cabinet weighs 170 kg. No vessel of its own, for...
A three-kilowatt pump in the large L2 cabinet with a control panel and LED fault indication. The output is the same as the L1 version; what you gain is room inside and better...
The biggest motor on 200 l: the A49B pump with 4 kW draws in 595 l/min at 1,400 rpm, 11 bar, 125 kg. A tank you can still wheel on the handle and braked castors; two quick...
The most air that fits into the low assembly on a 270 l receiver. A four-kilowatt two-stage pump in an L1 cabinet, 248 kg.
The most air of all the narrow assemblies — a five-hundred-litre receiver at a width of just 580 mm. A four-kilowatt two-stage pump, L1 cabinet, 274 kg.
The most air that fits into the small cabinet: 598 l/min from a four-kilowatt pump, an L1 cabinet weighing 170 kg. No vessel of its own, for pipework or a separate receiver.
Two-stage A49B pump with 2.2 kW on 400 V: 444 l/min at 1,050 rpm, 11 bar, 150 l tank on castors, 114 kg. Intercooler, aftercooler, regulator, DN 7.2 quick coupling; 91 dB Lwa /...
The calmest four-kilowatt machine on a 270 l receiver. The B59 pump runs more slowly than an equally strong A49B, which is why it is two decibels quieter. L2 cabinet, 252 kg.
The calmest four-kilowatt machine on a 270 l receiver, with a soft motor start on top. For workshops with a weaker supply or with frequent cut-ins. L2 cabinet, 252 kg.
A large air reserve on a narrow footprint: a five-hundred-litre receiver and only 580 mm of width. The slowed B59 pump holds the machine at 87 dB Lwa. L1 cabinet, 274 kg.
The calmest machine of the large assembly: 87 dB Lwa with a five-hundred-litre receiver and a tall L2 cabinet with the controls on a column. A slowed four-kilowatt B59 pump, 302...
The calmest machine in the category and the way into the assembly with a built-in dryer. A slowed four-kilowatt B59 pump in an L2 cabinet on a five-hundred-litre receiver, 302 kg.
The calmest machine in the category, with soft motor starting on top. For workshops with a weaker supply or where the compressor cuts in often. L2 cabinet with a dryer on a 500...
The calmest machine in the whole category — 87 dB Lwa. The B59 pump at four kilowatts turns more slowly than its rivals in the same cabinet, and that is why it is quieter. L1...
Product detailed description
1/2" Pressure regulator suitable directly on the compressor pressure vessel
- Special versions of the controllers for direct mounting on a flat air duct
- Original accessories for ABAC compressors
- Used to reduce the compressor output pressure, equipped with pressure gauge and two quick couplings at the outlet for connecting 2 hoses at the same time
Additional parameters
| Category: | Pressure regulator for a compressor, mounted on the receiver |
|---|---|
| Pressure: | 18 bar |
| Medium: | Compressed air |
| Manometer connection: | 1/4" |
| Regulatory range: | 0 - 16 bar |
| Pressure gauge range: | 0 - 16 bar |
| Thread: | G 1/2" |
| In stock: | External warehouse |
Pressure regulator from ABAC as an accessory for ABAC piston compressors. The regulator is suitable for mounting directly on the air tank of ABAC piston compressors in 3/8"...
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.

Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.

Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.

A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.

Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
