Sterile filter SFS-144 – 10 bar, DN65, 28,000 l/min 0.01 micron sterile element · 10 bar
Code: SFS-144
Related products
Product detailed description
The SFS-144 stainless steel sterile filter traps submicron particles down to 0.01 µm, including microorganisms (bacteria). It has a DN65 connection for a ø 76.1 mm tube, a flow of 28,000 l/min at 7 bar and a working pressure of up to 10 bar.
It belongs to the range of SF sterile filters. The housing is also designed for sterilisation.
Specifications
| Parameter | Value |
|---|---|
| Connection | DN65, tube ø 76.1 mm |
| Flow at 7 bar | 28,000 l/min (1,680 Nm³/h) |
| Working pressure | 10 bar |
| Element temperature | −20 to +150 °C |
| Filtration rating | 0.01 µm |
| ISO 8573-1 class | 1-x-x |
| Element replacement | at least once every 12 months |
| Element | SFS-144V |
| Element material | borosilicate microfibres |
| Element design | wrapped |
| Housing | stainless steel 1.4404, polished |
| Height A | 741 mm |
| Width across the connections B | 205 mm |
| Housing diameter C | 139.7 mm |
| Connection axis height D | 136 mm |
| Weight | 8.4 kg |
| Vent and drain E | G 1/4" thread at the top and in the bottom |
Housing and dimensions
The housing is made of stainless steel 1.4404 with the outer surface polished to Ra 0.8 and is also designed for sterilisation. According to the manufacturer, the sterile element withstands a large number of sterilisation cycles and works at −20 to +150 °C.
According to the manufacturer: height A 741 mm, width across the connections B 205 mm, housing diameter C 139.7 mm, connection axis height D 136 mm. Weight 8.4 kg.
Flow by pressure
The flow applies to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, it is multiplied by the correction factor; at 10 bar it is 1.38:
| Pressure (bar) | 4 | 7 | 10 |
|---|---|---|---|
| Flow (l/min) | 17,640 | 28,000 | 38,640 |
Spare element
Where to place it
It goes at the end of the filtration, after the SPFM fine pre-filter and the SPFS microfilter. They trap the oil and most of the particles, so the sterile element works with clean air.
You will find other sizes among the SF sterile filters.
Additional parameters
| Category: | SF sterile stainless steel filters up to 10 bar, DN10 to DN100 |
|---|---|
| Version: | Sterile filter |
| Pressure: | 10 bars |
| Connecting: | DN65 |
| Dimensions: | 741 × 205 × 139.7 mm |
| Filtration: | 0.01 µm |
| Filter insert: | SFS-144V |
| Material: | Stainless steel |
| Number of inserts: | 1 |
| Working temperature: | -20 / +150°C |
| Flow: | 28,000 l/min |
| Quality class - solid impurities: | 1 |
Product rating
Be the first who will post an article to this item!
Alfa and Omega from SloveniaIn the Slovenian capital, Ljubljana, there is a company specialized in compressed air treatment, production of industrial filters and filter inserts, separators or special membrane dryers and other products. Omega Air was founded in 1988 as a family business and soon secured a place in the industry. Over the years, Omega Air's workforce has also grown with increasing production and today the company employs more than 250 people. |
 |
 |
Omega products are used everywhereA wide range of applications is typical for Omega Air products. Its products are used in heavy industry as well as by private entities. Slovenia's footprint is thus noticeable in industrial sectors such as electrical, gastronomy, pharmaceuticals, moto and also in the chemical-industrial sector. However, the company's main product is special filters, which are exported all over the world. |
No greenhorn in the industryOmega Air also boasts several proprietary innovations and patents that originate in the development department. The company has also been awarded several times for its innovative solutions at the International Engineering Fair itself, which is traditionally held in Hannover, Germany. The Omega Air product range is brought to you by our air compressors company below. |
What Omega Air produces:
|