B-AIR and B-AIR PLUS breathing air filters

B-AIR filters from the Slovenian manufacturer Omega Air prepare compressed breathing air directly at the point of use. The set has three stages: an S microfilter, an H2 catalytic filter with a hopcalite filling and an A2 adsorption filter with activated carbon.
B-AIR PLUS adds analysers to the set; they monitor CO, CO₂ and oxygen and trigger an alarm when the limit values are exceeded. The filters are part of the range of industrial compressed air filters.
What you will find in this category
Stages and sets
| Filtration stages in the B-AIR set | |||||
|---|---|---|---|---|---|
| Order | Stage | What it does | Solid particle class | Residual oil | Spare elements |
| 1 | S microfilter | traps solid particles, water and oil down to 0.01 µm | 1 | < 0.01 mg/m³ | S microfilter elements |
| 2 | H2 catalytic filter | reduces carbon monoxide CO and some other substances | 1 (only with S before it) | – | H2 catalytic elements |
| 3 | A2 adsorption filter | traps oil vapours and odours | 1 (only with S before it) | < 0.005 mg/m³ | A2 adsorption elements |
| B-AIR sets | |||||
|---|---|---|---|---|---|
| Set | Connection | Flow at 7 bar | Filter dimensions A × B × C × D | Set weight | Spare elements S, H2, A2 |
| BAIR-0076 | G 1/2" | 78 Nm³/h (1,300 l/min) | 187 × 88 × 20 × 60 mm | 3 × 0.47 kg | AAFS-78V AAFH2-78V AAFA2-78V |
| BAIR-0106 | G 3/4" | 120 Nm³/h (2,000 l/min) | 257 × 88 × 20 × 80 mm | 3 × 0.6 kg | AAFS-120V AAFH2-120V AAFA2-120V |
| BAIR-0186 | G 1" | 198 Nm³/h (3,300 l/min) | 263 × 125 × 32 × 100 mm | 3 × 1.57 kg | AAFS-198V AAFH2-198V AAFA2-198V |
| BAIR-0306 | G 1" | 335 Nm³/h (5,583 l/min) | 363 × 125 × 32 × 120 mm | 3 × 2.2 kg | AAFS-335V AAFH2-335V AAFA2-335V |
| BAIR-0476 | G 1 1/2" | 510 Nm³/h (8,500 l/min) | 461 × 125 × 32 × 140 mm | 3 × 2.8 kg | AAFS-510V AAFH2-510V AAFA2-510V |
| BAIR-0706 | G 1 1/2" | 780 Nm³/h (13,000 l/min) | 640 × 125 × 32 × 160 mm | 3 × 3.9 kg | AAFS-780V AAFH2-780V AAFA2-780V |
According to the manufacturer’s technical data. The flow applies at 7 bar and 20 °C.
#showmore#
Order of the stages

The S microfilter comes first. It traps solid particles, water and oil and protects both of the following stages. Solid particle class 1 for stages H2 and A2 only applies with the S microfilter before them.
The H2 catalytic filter reduces carbon monoxide CO and some other substances. The A2 adsorption filter with activated carbon traps oil vapours and odours; residual oil is below 0.005 mg/m³.
What the B-AIR set does not remove
The manufacturer does not designate the B-AIR set for removing carbon monoxide CO and carbon dioxide CO₂. The catalytic stage only reduces the CO content and does not remove CO₂. Where the composition of the air needs to be monitored, B-AIR PLUS with analysers is intended for this.
The hopcalite filling needs air with sufficiently low humidity, so a compressed air dryer belongs before the filters.
Element replacement
For B-AIR sets, the manufacturer specifies element replacement every 3 months. The spare elements are the same as for AAF filters of the same size.
Ventilek’s tip
Do not change the order of the stages. The S microfilter always goes first: it protects the catalytic and adsorption elements, and solid particle class 1 only applies with it.
- Are carbon monoxide and carbon dioxide removed by B-AIR?
- Not completely. The H2 catalytic stage reduces the CO content; it does not remove CO₂. The composition of the air is monitored by B-AIR PLUS.
- How do I choose the size of the set?
- According to the flow at the actual pressure. The nominal flow applies at 7 bar; at a different pressure, multiply it by the correction factor.
- How often should the elements be replaced?
- For B-AIR sets, the manufacturer specifies replacement every 3 months.
- Do I need a dryer before the filters?
- Yes. The hopcalite filling needs air with sufficiently low humidity.
- What temperature range do the filters work in?
- From +1.5 to +45 °C.
Product sorting
List of products
Spare element AAFS-78V for microfilter AAFS-78. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-120V for microfilter AAFS-120. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-335V for microfilter AAFS-335. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFA2-198V for adsorption filter AAFA2-198. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA2-335V for adsorption filter AAFA2-335. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA2-510V for adsorption filter AAFA2-510. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA2-78V for adsorption filter AAFA2-78. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA2-780V for adsorption filter AAFA2-780. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA2-120V for adsorption filter AAFA2-120. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFH2-78V for catalytic filter AAFH2-78. Recommended replacement within 6 months at the latest, earlier depending on use.
Spare element AAFH2-120V for catalytic filter AAFH2-120. Recommended replacement within 6 months at the latest, earlier depending on use.
Spare element AAFS-510V for microfilter AAFS-510. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFH2-198V for catalytic filter AAFH2-198. Recommended replacement within 6 months at the latest, earlier depending on use.
Spare element AAFH2-335V for catalytic filter AAFH2-335. Recommended replacement within 6 months at the latest, earlier depending on use.
Spare element AAFS-780V for microfilter AAFS-780. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-198V for microfilter AAFS-198. Recommended replacement every 12 months or 4,000 operating hours.
B-AIR 0106 filter set with CO, CO₂ and O₂ analysers, a pressure regulator and quick couplings in a yellow cabinet. It triggers an alarm when the limit values are exceeded. For...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 1/2", 1,300...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 3/4", 2,000...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 1", 3,300...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 1", 5,583...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 1 1/2",...
Three-stage Omega Air B-AIR set for preparing compressed breathing air: S microfilter 0.01 µm, H2 catalytic filter and A2 adsorption filter with activated carbon. G 1 1/2",...
Spare element AAFH2-510V for catalytic filter AAFH2-510. Recommended replacement within 6 months at the latest, earlier depending on use.
Spare element AAFH2-780V for catalytic filter AAFH2-780. Recommended replacement within 6 months at the latest, earlier depending on use.




