Pneu and Aku tools with gun technology
Gun technology - i.e. guns for blowing, spraying paint, blasting and also guns for inflating tyres. You can find all the assortment of this kind here. The advantages of the gun technology are especially useful in workshops, paint shops, car repair shops and tyre workshops. We also offer a full range of accessories, such as balancers or winding drums, which will improve your workplace comfort and make handling easier. And if you want to learn more about pistol technology and know what to consider when making your choice click continue.
#ShowMore#
Blow guns and taps
Guns for blowing off work surfaces, objects and machines make your cleaning work easier and help you get rid of unwanted dirt. But to think that all blow guns are the same or similar would be a big mistake. And it is precisely for this reason that in many workplaces we encounter inappropriately selected types of pistols, the use of which can often endanger you and your fellow workers.
How to choose a blow gun and a blow cock?
- choose the right design - a metal body is more durable, can withstand falls on the floor and rough handling, while a plastic body does not have to be cold at low temperatures
- choice of nozzle - the cheap versions of the guns do not have to have an exchangeable nozzle, with an exchangeable nozzle you can change the shape of the jet, reduce noise or protect yourself against flying dirt
(our range of nozzles is here:Nozzles for blow guns) - choosing the right lever - unnecessarily high air pressure, where you can literally feel the resistance of the gun towards your hand when you press the lever is a common problem in workplaces, dirt is then spread all around, so think about whether to choose a gun with a potentiometer/regulator
(you can find the range of guns with flow control here: guns with flow control) - air pressure regulation - if you don't want the pressure regulator directly on the gun, you can connect a miniature pressure regulator designed for direct mounting on the blow gun's supply (our range of miniature regulators is here: BLP Pressure Regulators)
Nozzle types for blow guns
- basic nozzle (centrally located opening, uniform flow)
- extended nozzle (straight or angled end, suitable for blowing out dirt from hard-to-reach holes - commonly from milling holes and pockets)
- safety nozzle with air shield (side drilling splits the jet and creates a protective air shield, increases air consumption)
- sound-dampened nozzle (inside there is a wound bronze insert that slows down part of the air stream to reduce noise from 90 to 70 dB)
- regulated nozzle (allows you to set the ideal flow rate for specific applications, thus reducing air consumption costs)
- flat nozzle (for process blowing in industrial applications, the stream is divided into several channels)
- injector nozzle (nozzle with extreme performance due to suction and entrainment of air from the surrounding atmosphere)
Article from the advisory board: how to choose a suitable blow gun
Spray gun
Spraying paint with compressed air is an effective tool for achieving beautiful, colourful surfaces with high spray quality. The system of spraying paint with the help of a compressor is simple - the compressed air produced by the compressor enters the spray gun through a hose, where it is mixed with the paint from a container that is part of the gun and then discharged from the gun through a nozzle. It is a precise solution for both hobbyists and professional painters.
Classification of spray guns by pressure
- high-pressure guns - common guns that have a higher dust content due to the high air pressure at the outlet
- low pressure guns - lower dust content due to lower outlet pressure, high air consumption
- HVLP gun - lowest pressure, high efficiency, lowest dust, but also high air consumption
*HVLP - "High Volume Low Pressure" - meaning high performance but low pressure
What nozzle diameter should I choose?
- For priming - guns with nozzles from 1.2 to 1.3 mm
- For work with lacquers, acrylic paints and finishing - nozzle from 1.4 to 1.5 mm
- Primers with large working grain and acrylic type 2K - nozzle from 1.5 to 1.7 mm
Advice article: how to choose a spray gun for paint application
Blasting gun, or sandblasting gun
There is no difference between blasting and sandblasting. These guns are the same and are primarily suitable for removing old coatings, paints, as well as corrosion and other unwanted coatings and deposits, for example before painting, when you need to unify the surface. So if you don't want to do manual work, we recommend connecting a blast gun to the compressor.
Facts to consider when making your choice:
- guns for larger grains do the job faster, but not as much detail
- small grain guns are suitable for detailed work, you can work better with small areas
- all guns create dust and mess, but you have unlimited working space compared to a sandbox
- if you work with the blast gun frequently, it is advisable to have a capable ventilation system in the workshop
- replacement nozzles are standard
How to choose a sandblasting gun
It may also come in handy:
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Pneumatic washing, spraying and sandblasting guns M7
-
Washing gun; pressure washing with water
Product sorting
List of products
GNL-165 straight long nozzles with a straight profile for improved handling and reach during blowing. Nozzle length 165 mm.
Replacement blowing nozzle in basic design for ABG pistols. Designed for cleaning work surfaces and products in industry, crafts, etc.
Basic nozzle GN-B with centrally located 1.5 mm diameter hole. Concentrated air flow with high force. Noise level up to 90 dB (A) at pressures up to 4 bar.
Filter for mounting on spray guns and pneumatic tools with a maximum pressure of up to 16 bar and a filtration capacity of 20 µm and 1/4" thread.
Replacement blowing nozzle in extended version 300 mm for ABG guns. Designed for cleaning work surfaces and products in industry, crafts, etc.
Simple blow gun with blue plastic body and 100 mm metal nozzle for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female thread, air flow...
Basic valve for inflating tyres and wheels as an accessory for the TG-09 compressed air inflator.
Airbrush in practical set with vinyl hose, containers, tightening wrench, dropper and feeding adapter. Adjustable coating width from 6 to 40 mm. Air inlet 1/4" with special...
Professional spray gun with 1.7 mm nozzle in top-canister version, regulation of air supply, beam shape and paint quantity. Low-pressure HVLP technology to save paint. High...
Simple blow gun with red plastic body and metal extended nozzle length of 100 mm for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female...
The tire inflator is used for easy filling of compressed air into tires of cars, motorcycles, bicycles, etc. Spare parts and accessories for tyre inflators, valves, needle...
Basic tyre inflator TG01 for easy filling of compressed air into tyres of cars, motorcycles, bicycles etc. Spare parts and accessories for tyre inflators, valves, needle valves,...
Battery DB-1850P — battery. 18V 5.0 Ah Li-ion battery, weight 760 g.
The range of blow guns in all-metal design, variant with standard nozzle. Designed for cleaning work surfaces and products in industry, crafts, etc.
Set of blow gun with 100 mm nozzle and 5 m spiral hose with 8/5 mm diameter.
Blowgun series in all-metal design, version with extended nozzle 300 mm. Designed for cleaning work surfaces and products in industry, crafts, etc.
Valve for mattress inflation as an accessory for the TG-09 compressed air inflator.
Replacement blowing nozzle in extended version 100 mm for ABG guns. Designed for blowing and cleaning work surfaces and products in industry, crafts, etc.
Blowgun series in all-metal design, variant with extended nozzle 100 mm. Designed for cleaning work surfaces and products in industry, crafts, etc.
Reversible valve with handle for inflating wheels and tyres as an accessory for TG tyre inflators with compressed air.
Nozzle set with 1.4 mm nozzle for SGH827 low pressure spray guns with HVLP system. For high efficiency of paint transfer and time-saving work. Design with 600 ml nylon upper...
Nozzle set with 2.0 mm nozzle for SGH827 low pressure spray guns with HVLP system. For high efficiency of paint transfer and time-saving work. Design with 600 ml nylon upper...
Small regulator for mounting on spray guns with max. pressure 11 bar, 1/4" thread and 40 mm pressure gauge.
Practical five-piece set of basic guns with accessories for DIY, craft and general maintenance work. Set includes: 1 pc spray gun with top container, 1 pc air blower, 1 pc blow...
GN-IA aluminium injector nozzle with extreme performance by drawing and drawing air from the ambient atmosphere into the air stream of the gun. Aluminium design for higher...
Simple blow gun with blue plastic body and metal nozzle extension of 300 mm for common DIY and craft use. Suitable for working in tight spaces, connection via1/4" female thread,...
Set of basic pneumatic inflator with auto valve and 5 m spiral hose with diameter 8/5 mm.
Simple blow gun with blue plastic body and 20 mm metal nozzle for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female thread, air flow...
Spray gun with upper container and 1.8 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
Bicycle valve with galus valve as reduction for TG-09 tyre inflators for compressed air inflation.
Extended and curved GN-L nozzle for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm.
Hose 300 mm long with base valve as accessory for the TG-09 wheel inflator. Connection of the hose with G1/4" thread.
Curved long GNLB-160 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 160 mm.
Set of blow gun with 30 mm nozzle and 5 m spiral hose with 8/5 mm diameter.
Simple blow gun with red plastic body and 20 mm metal nozzle for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female thread, air flow...
Air Tool Oil OLN-1 — oil for pneumatic tools. High-quality oil designed for lubricating air tools.
Miniature pressure regulators designed for direct mounting on 1/4" threaded blow gun inlets. They provide a constant output pressure of 5 bar and significantly reduce the cost...
Miniature pressure regulators designed for direct mounting on 1/4" threaded blow gun inlets. They provide a constant output pressure of 4 bar and significantly reduce the cost...
Simple blow gun with red plastic body and metal nozzle extension of 300 mm for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female thread,...
Needle valve for ball filling as an accessory for TG-09 compressed air inflators.