Float condensate drain B2FD for filters

The B2FD is a float drain built for filters and preparation units. It replaces the manual valve that nobody opens regularly anyway, and it manages without electricity.
Specifications
One unit for filters and air preparation units.
| Float B2FD drain — specifications and connection | ||
|---|---|---|
| Order code | Working pressure | Intended for |
| B2FD | up to 18 bar | for B2 units |
#showmore#
How the B2FD works
Just like the other floats: the condensate level lifts the float, the float opens the valve, the condensate leaves and the valve shuts. No electronics, nothing to set.
Its advantage is that it fits on a preparation unit, where there is no room for a larger drain.
Fitting
It goes in place of the manual valve in the bowl of a filter or a preparation unit.
What to watch
It is a drain for filters, not for the receiver behind the compressor. There the condensate is many times heavier and calls for a larger float or an electronic unit.
Ventilek says
The valve on a filter is opened by hand. Which means almost never.
A preparation unit has a valve at the bottom meant to be opened regularly. In practice it gets forgotten, the bowl fills up and the filter stops filtering. The B2FD does it itself and costs nothing to run.
Frequently asked questions — float b2fd
- Where does the B2FD go?
- In place of the manual valve in the bowl of a filter or a preparation unit.
- Does it need electricity?
- No. It is purely mechanical, working on a float.
- Is it enough for the receiver behind the compressor?
- It is not built for that. There the condensate is far heavier — reach for a larger float or an electronic drain.
Product sorting
List of products
B2FD float drain for automatic condensate draining from B2F filters and B2FM microfilters of the B2 range in all sizes. The condensate is led away through a 6 mm hose barb.