Accessories and original spare parts for compressors
Do you care about your compressor working for a long time, reliably, and with maximum efficiency? We have a complete range of spare parts and accessories for piston and screw compressors that you absolutely need for regular service intervals and routine maintenance.
- ✅ Warranty Guarantee: Please note that to comply with warranty conditions, it is necessary to use exclusively original spare parts for compressors.
- ✅ Regular maintenance: Don't forget to change the oil on time after reaching the prescribed number of operating hours or when replacing clogged intake filters.
- ✅ Pressure regulation and switching: In our offer you will also find high-quality pressure switches and pressure regulators. They are designed for connection directly to the air tank and equipped with two compressed air outlets using standard DN7.2 quick couplings.
You can read more details about proper compressor service and maintenance below.
#ShowMore#
Regular service: The key to trouble-free operation of the compressor station
Compressors in general are extremely reliable helpers. The condition, however, is that you avoid cheap, unrepairable "no-name" machines from China. Avoid purchasing such devices and opt for proven branded machines (Atmos ,ABAC , Mark, Puma, Engine Air). With these brands, any maintenance and service is a breeze thanks to easily available spare parts.
🔹 The maintenance plan is the foundation
Compressors require your proactive approach – but once in a while it’s no problem. Just as your car needs regular oil changes and new tires, your compressor also has a number of regular service tasks on its itinerary. An exemplary owner who cares about his property always observes these intervals. More advanced compressors today even have a control systemthat automatically monitors these intervals and reminds the operator in good time that maintenance time is approaching.
🔹 Air conditioning maintenance
High-quality compressed air does not happen by itself. Therefore, do not forget to regularly maintain your air treatment equipment! This includes:
🔹 Pressure vessel inspection and professional service
In addition to servicing the unit itself, for safety and legislative reasons, it is also necessary to carry out regular inspections of pressure vessels - air tanks . We can help you professionally arrange them, as well as complete other compressor and air conditioning services.
📞 Need advice? Contact us: +420 311 532 091 | ✉️ E-mail: info@kompresory-vzduchotechnika.cz
.png)
Product sorting
List of products
The genuine oil for ATMOS Perfect and Perfect Line piston compressors. The viscosity is chosen for these machines, so there is no substitute to hunt for.
Replacement suction filter insert for large round suction filter for ATMOS compressors. This filter insert is found in ATMOS Perfect series reciprocating compressors with an...
GPD5030 silent blocks for compressors with pressure vessel. Designed primarily for mounting on pressure vessel attachments, they prevent vibration transmission and contribute to...
Replacement non-return valve for piston compressor. Connection to the air tank external thread 1/2". Connection to the compressor external thread 3/8". Viton seal. Prevents...
Miniature ball valves made of nickel-plated brass. Body - nickel-plated brass, lever - aluminium, ball - chrome-plated brass, seal - PTFE. For compressed air connections in...
Relief valve with 1/4" connection with set pressure 8.8 bar and flow rate at set pressure 76 Nl/min. Design for all piston compressors Black Wind. Complies with Directive...
Replacement non-return valve for piston compressor. Connection to the air tank internal thread 1". Connection to the compressor external thread 1". Viton seal. Prevents backflow...
The suction filter serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are supplied with suction filters as standard...
Miniature ball valves made of nickel-plated brass. Body - nickel-plated brass, lever - aluminium, ball - chrome-plated brass, seal - PTFE. For compressed air connections in...
A single-phase Condor that arrives set to a lower pressure than its sibling. The inlet thread is the narrower quarter-inch.
The simplest switch in the range. It arrives fixed at its setting, so nothing has to be trimmed after fitting.
Silentblocks GPE4030 for compressors with pressure vessel. Designed primarily for mounting on pressure vessel extensions. They prevent vibration transmission and contribute to...
The LogiDrain LD200 intelligent condensate drainage system with a compressor flow rate of up to 15,000 l/min is a state-of-the-art condensate drainage system with automatic...
A one-litre bottle of the oil the manufacturer specifies for ABAC Line L/V machines and the single-stage A29 and A39. On most of them one pack covers a full change.
Replacement suction filter insert for large round suction filter for ATMOS compressors. This filter insert is found in ATMOS Bobby series piston compressors, Perfekt line...
The stronger of the two single-phase Condors. It is the only one with an unloader valve included, so the motor does not start against pressure.
GPD7550 silent blocks for compressors with pressure vessel. Designed primarily for mounting on pressure vessel attachments, they prevent vibration transmission and contribute to...
ABAC pressure regulator as an accessory for ABAC piston compressors. The rack is suitable for mounting directly on the airbox of ABAC piston compressors in 1/2" design. This is...
The large round ATMOS suction filter with 3/4" male pipe thread serves as protection against dirt entering the machine and needs to be replaced regularly. ATMOS compressors are...
Suction filter for piston compressors BB-2,2-50CM.
Two bottles of genuine ATMOS oil together. For Perfect machines from 4 kW upwards, where one bottle does not cover a change.
The leaner version for tanks that already have their own ports. It screws in with a single thread and nothing else connects to it.
Replacement non-return valve for piston compressor. Connection to the air tank external thread 1/2". Compressor connection external thread 1/2". Viton seal. Prevents backflow of...
Safety valve with 1/4" connection with set pressure 11.0 bar and flow rate at set pressure 120 Nl/min. Design for all piston compressors Black Wind. Complies with Directive...
Replacement non-return valve for piston compressor. Connection to the air tank external thread 3/8". Connection to the compressor external thread 3/8". Viton seal. Prevents...
Miniature ball valves made of nickel-plated brass. Body - nickel-plated brass, lever - aluminium, ball - chrome-plated brass, seal - PTFE. For compressed air connections in...
The ATMOS large round suction filter with 1" external pipe thread serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are...
Replacement non-return valve for piston compressor. Connection to the air tank, 1/4" external thread. Connection to the compressor external thread 3/8". Viton seal. Prevents...
ATMOS square suction filter for Perfect 2,2KW, 3KW, Perfect line 2,2/50, 2,2/50E, 2,2/90, 2,2/200, 2,2/200E, 3,0/90X, 3,0/100S, 3,0/200X compressors. It serves as protection...
Replacement non-return valve for piston compressor. Connection to the air tank internal thread 1/2". Connection to the compressor external thread 3/8". Viton seal. Prevents...
A basic single-phase switch from an Italian maker. It is switched on with a pull button, not with a rotary knob as the Condors are.
Separate replacement oil sight glass for compressor with 1/2" male pipe thread. Anodized aluminium star with a red dot in the middle for better contrast. Material : transparent...
Separate replacement oil sight glass for compressor with 3/8" male pipe thread. Anodized aluminium star with a red dot in the middle for better contrast. Material : transparent...
Drain valve with thread G 1/4" for manual draining of condensate from the pressure vessel of the compressor Black Wind.
The only version in the range that works above eleven bar. For machines where an ordinary switch runs into its ceiling.
The highest protection range in the catalogue. It helps where the motor draws more than the other versions will cover.
ABAC pressure regulator as an accessory for ABAC piston compressors. The rack is suitable for mounting directly on the airbox of ABAC piston compressors in 3/8" version. This is...
GPD5020 silent blocks for compressors with pressure vessel. Designed primarily for mounting on pressure vessel attachments, they prevent vibration transmission and contribute to...
Silentblocks GPE4025 for compressors with pressure vessel. Designed primarily for mounting on pressure vessel extensions. They prevent vibration transmission and contribute to...
Suction filter for piston compressors BL-1,5-24CM, BL-1,8-50CM, BV-2,2-50CM.