ICONS compressor monitoring: running hours from anywhere
A monitoring unit sends the compressor’s data to a server, where you read it from a computer or a phone. No more walking to the compressor room just to copy down the running hours, and the service interval will not slip past you. We stock two different answers: Clamp clamps around a motor phase and works on any brand, while Mk4 and Mk5 connect straight to the machine’s controller and send considerably more.
Which system you need
The machine you want to watch decides. With an Atlas Copco or MULTIAIR compressor carrying an Mk4 or Mk5 controller you connect straight to it and also get pressures, temperatures and events. For any other machine — or when all you need is the running hours — Clamp is enough; it clamps around one phase of the motor.
| ICONS monitoring units — Clamp, Mk4 and Mk5 by machine type | ||||
|---|---|---|---|---|
| Product | For which machines | How it measures | How often it sends | Licence |
| ICO-CLAMP | any brand, 2–30 kW | clamp ammeter on a motor phase | 3 dny | free |
| ICO-MK4 | Atlas Copco and MULTIAIR with an Mk4 controller | from the controller over CAN | by licence: weekly or every 24 h | RIGHTIME free, UPTIME and ENERGY paid |
| ICO-MK5 | Atlas Copco and MULTIAIR with an Mk5 controller | from the controller over ethernet | by licence: weekly or every 24 h | RIGHTIME free, UPTIME and ENERGY paid |
Clamp measures the current in a motor phase, so it knows when the machine is running — and on screw compressors it also tells loaded from unloaded. Mk4 and Mk5 read straight from the controller, so they also see what goes on inside the machine. The difference between Mk4 and Mk5 is the cable: Mk4 connects over CAN, Mk5 over ethernet.
#showmore#
ICONS Clamp — for any brand
Clamp is a standalone module with a clamp ammeter. It clamps around one phase of the electric motor, measures the current and stores the running hours in its internal memory. On screw compressors it also tells when the machine runs loaded and when unloaded.
Fitting takes a few minutes and touches nothing in the controller — which is why the brand does not matter. The module holds a SIM chip that sends the readings to the maker’s server every three days. Running it is free, with no licence fees.
What Clamp works on
Anything with an electric motor rated 2 to 30 kW — the datasheet names:
- screw compressors
- piston compressors
- vane compressors
- scroll compressors
- refrigerant dryers
- vacuum pumps
- industrial chillers

ICONS for Mk4 and Mk5 controllers
This version connects straight to the machine’s controller and reads what the machine actually does — maintenance status, load, the loaded-to-unloaded ratio, hours to the next service and events. The UPTIME licence adds readings from the pressure and temperature sensors.
The system was developed by the MULTIAIR group of compressor makers and talks to Mk4 and Mk5 generation controllers on machines made by ATLAS COPCO and MULTIAIR. It runs in a single compressor or across a network on Ethernet and CAN.
Installation
The module is fitted into the switch cabinet, connected to power and to the controller, and an antenna goes on top of the machine. Commissioning takes no more than an hour. The data then goes out as GPRS data packets to the maker’s server, from where you reach them over the internet on a computer or a phone.
What is in the kit
The contents differ between generations by one cable — depending on how the controller connects.
ICO-MK4 — kit for Mk4 controllers
- the ICONS device
- antenna
- CAN cable
- interface cable
- mounting plate
- power supply
ICO-MK5 — kit for Mk5 controllers
- the ICONS device
- antenna
- ethernet cable
- interface cable
- mounting plate
- power supply

Licences: what each one does
The Mk4/Mk5 system runs under one of three licences. RIGHTIME is free and active the moment it is installed; UPTIME and ENERGY are paid annual licences.
| ICONS licence comparison — RIGHTIME, UPTIME and ENERGY | |||
|---|---|---|---|
| Feature | RIGHTIME | UPTIME | ENERGY |
| Monthly service e-mail | ✓ | ✓ | ✓ |
| Monthly maintenance status | ✓ | ✓ | ✓ |
| Service enquiry | ✓ | ✓ | ✓ |
| Maintenance status online | ✓ | ✓ | ✓ |
| Maintenance log | ✓ | ✓ | ✓ |
| SMS or e-mail on a fault and before a due service | — | ✓ | ✓ |
| Event list | — | ✓ | ✓ |
| Current compressor status | — | ✓ | ✓ |
| Machine performance data | — | ✓ | ✓ |
| Energy reports | — | — | ✓ |
| How often data arrives | weekly | every 24 hours | every 24 hours |
| Licence cost | free | paid annual | paid annual |
Mind the difference: on UPTIME the data leaves the machine every 24 hours, but an alert for a fault or a due service arrives within 5 minutes of the event — by e-mail and SMS. The two are easily confused.
The ENERGY licence adds economic data on the machine’s energy efficiency to UPTIME, plus energy reports you can feed into a system under ISO 50001.
Clamp needs no licence at all — running it is free.
What you get out of it
When you service the machine
One platform for the whole compressor room, better service planning and parts ordered in time. No more asking how many hours a machine has run, and no interval slips past. Reacting to seasonal swings in load is immediate.
When you run the machine
No pointless trips to the compressor room just to copy down the running hours — you look from the office or from home. And you need not dig through the controller: the figure is there for anyone, not only the operator.
What goes with it
Monitoring tells you when a service is due. This is what the service needs.
- Service kits — everything for one service under one code
- Compressor oils — what every service replaces
- Intake filters — the other thing checked every time
- Compressor pumps — when monitoring shows the pump is past its best
Ventilek says
Running hours nobody copies down are running hours nobody watches.
Folks, it sounds like a toy for firms with ten machines, but the truth is simpler: a service gets put off mostly because nobody knows how many hours the machine has run. When the figure sends itself, there is nothing to put off. Two pieces of advice. First: choose by the machine, not by the price — on an Atlas Copco with an Mk4 or Mk5 controller it pays to connect straight to it, because you also see pressures and temperatures. For everything else there is Clamp, and that costs nothing to run. Second: do not mix up 24 hours and 5 minutes — the data comes once a day, but if something happens you know within five minutes.
Frequently asked questions about ICONS monitoring
- Which of the three should I choose?
- By the machine. With an Atlas Copco or MULTIAIR compressor carrying an Mk4 or Mk5 controller, choose by the controller generation — the difference is the cable (Mk4 over CAN, Mk5 over ethernet). For any other brand, or when you only need the running hours, Clamp is the right call.
- Do I have to pay for monitoring?
- Not for Clamp — running it is free, with no licence fees. On Mk4 and Mk5 the basic RIGHTIME licence is free and active as soon as it is installed. The extended UPTIME and ENERGY licences are paid annually.
- How often does the data arrive?
- Clamp sends the running hours every three days. On Mk4 and Mk5 it depends on the licence: RIGHTIME once a week plus a monthly e-mail report, UPTIME and ENERGY every 24 hours. An alert for a fault or a due service is a different matter though — that arrives within 5 minutes of the event.
- Does fitting it interfere with the machine?
- Clamp does not — it clamps around one phase of the motor and that is it, a few minutes’ work. Mk4 and Mk5 are fitted into the switch cabinet, connected to power and to the controller, with an antenna on top of the machine; commissioning takes no more than an hour.
- What if I have several compressors?
- The Mk4/Mk5 system runs not only in a single machine but also across Ethernet and CAN networks. You then see every machine on one platform.
- How do I reach the data?
- After fitting you get access to your own account and follow the data over the internet — on a computer or a phone. Service and operating figures can be shown as graphs or as a table.
- What machines does Clamp work on?
- Anything with an electric motor rated 2 to 30 kW — the datasheet names screw, piston, vane and scroll compressors, refrigerant dryers, vacuum pumps and industrial chillers. It is independent of the brand.
The figures follow the manufacturer’s datasheets attached to the individual products. The range of functions and the licence terms may change at the manufacturer — we will gladly confirm them before you order.
Product sorting
List of products
A monitoring module with a clamp ammeter that closes around one phase of the electric motor and tracks the running hours. It works on any brand of machine with a motor rated 2...
A monitoring system that connects straight to the Mk4 electronic controller of a compressor made by ATLAS COPCO and MULTIAIR. It reads the maintenance status, the load, the...
A monitoring system that connects straight to the Mk5 electronic controller of a compressor made by ATLAS COPCO and MULTIAIR. It reads the maintenance status, the load, the...