Compressor spare parts and accessories, Page 2

A replacement oil sight glass for a compressor with a G 1/4" pipe thread. Outer diameter 18 mm, window 9 mm, tightened with a 15 mm spanner. Transparent PA-T technopolymer body,...

A three-phase Condor for smaller workshop compressors. The connecting block has one inlet and three outlets, so a single port on the tank is enough.

Replacement non-return valve for piston compressor. Air tank connection internal thread 3/4". Compressor connection external thread 1/2". Viton seal. Prevents backflow of air...

A strong relay without a connecting block. For large three-phase machines whose tank offers only one port.

Original ATMOS service kit N770553 for servicing Perfect 5,5 piston compressors after 3 years of operation. It contains ATMOS VDL 100 oil with an extractor, air filter...

The five-litre pack of genuine WALTER oil. It covers a full change on every GK pump including the largest GK1400.

Replacement non-return valve for piston compressor. Connection to the air tank internal thread 1/2". Connection to the compressor external thread M22 x 1.5. Viton seal. Prevents...

A twenty-litre canister of the basic Rotair oil. The usual choice for one workshop with one screw machine and an annual change.

Suction filter for piston compressors BB-2,2-50CM.

A drum of a cost-effective alternative to original lubricants. For operations with several machines out of warranty, where the oil is changed in-house.

A twenty-litre canister of an oil with twice the interval of the basic Rotair and still not synthetic. The commonest choice for ordinary industrial duty.

The leaner version for tanks that already have their own ports. It screws in with a single thread and nothing else connects to it.

The all-round oil for a compressor used in the workshop every day. A grade tougher than the entry Altair Pro, but not yet the industrial range.

A replacement oil sight glass for a compressor with a G 3/8" pipe thread. Outer diameter 22 mm, window 11 mm, tightened with a 19 mm spanner. Transparent PA-T technopolymer...

The ATMOS large round suction filter with 1" external pipe thread serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are...

The middle relay in the plain threaded version. The commonest replacement for a worn-out switch on a production three-phase compressor.

An oil for compressor rooms that get hot in summer. It holds its properties where mineral oil starts to thicken and darken before the interval is up.

Replacement non-return valve for piston compressor. Connection to the air tank internal thread 1/2". Connection to the compressor external thread 3/8". Viton seal. Prevents...

Original ATMOS service kit N770306 for servicing Perfect 3 and Perfect Line 3 piston compressors after 2 years of operation. Major service: besides the oil, filter cartridges...

Replacement non-return valve for piston compressor. Connection to the air tank external thread 1/2". Compressor connection external thread 1/2". Viton seal. Prevents backflow of...

A monitoring module with a clamp ammeter that closes around one phase of the electric motor and tracks the running hours. It works on any brand of machine with a motor rated 2...

A replacement oil sight glass for a compressor with a G 1" pipe thread. Outer diameter 40 mm, window 25 mm, tightened with a 34 mm spanner. Transparent PA-T technopolymer body,...

The basic genuine oil for ABAC SPINN screw machines in the smallest canister. For compressor rooms that are neither hot nor damp nor dusty.

The only version in the range that works above eleven bar. For machines where an ordinary switch runs into its ceiling.

A replacement oil sight glass for a compressor with a G 1 1/4" pipe thread. Outer diameter 47 mm, window 30 mm, tightened with a 40.5 mm spanner. Transparent PA-T technopolymer...