This text is a practical supplement to the main guide How to choose a compressor. It focuses on a typical home workshop and garage – DIY work, blowing, inflating and routine car maintenance. If you want to skip the calculations, our power calculator will work out the required air delivery for you.
13:22
Video: How to choose an air compressor step by step. The video starts right at the chapter Home workshop and garage (11:17). Ventilek shows how to calculate air delivery, pressure and tank size, and goes through five workplaces. You can work it out straight away in the compressor selection calculator. The video is in Czech with English subtitles.
2:14 How much air and pressure your tools need 3:02 How to calculate air delivery and pressure 4:49 Air receiver and pressure switch 7:04 Car repair shop 8:02 Tyre shop 9:21 Paint shop 10:16 Joinery 11:17 Home workshop and garage
What you power with air at home
Choosing a compressor starts with the tools, not the machine. Every pneumatic tool has its own air consumption in litres per minute and its own working pressure. Approximate values according to our calculator look like this:
| Tool | Consumption | Pressure |
|---|---|---|
| Blow gun | 120 l/min | – |
| Tyre inflation | 60 l/min | – |
| Stapler | 40 l/min | 7 bar |
| Impact wrench 1/2" | 150 l/min | – |
Anyone who wants to get the tools themselves as well will find a wider selection in our offer.
@kategorie@(/pneumaticke-naradi/)(8)(slider)
Calculation step by step
The key point is that at home no tool runs continuously. You use each tool only for a short while – so let's assume roughly 30% of the time. We multiply the consumption of each tool by this ratio:
- Blowing. 120 l/min × 30% = 36 l/min.
- Inflating. 60 l/min × 30% = 18 l/min.
- Stapler. 40 l/min × 30% = 12 l/min.
- Impact wrench. 150 l/min × 30% = 45 l/min.
The sum gives 111 l/min. To this we add a 30% reserve, so as not to push the compressor to the limit of its capabilities – the air delivery should be at least 150 l/min (the calculator rounds up to the nearest ten).
We calculate pressure in a similar way: the most demanding tool requires 7 bar, to which we add a 1.5 bar reserve for losses in the hose and switching – that is 8.5 bar. The machine should therefore be rated at least 9 bar; common piston machines have 10 bar.
Which machine to choose for a garage
For the described use, a piston compressor for a standard 230 V socket is ideal. You don't need to deal with a power supply line, and the machine will cover all DIY and maintenance work.
The volume of the air tank is important. We recommend a tank of at least 100 l. With a small tank, the compressor would switch on more than 10 times per hour at this consumption, wearing out unnecessarily and being noisy.
200 l tank
A piston machine for 230 V with an air delivery of 208 l/min and a 200 l air tank. It covers the described consumption with a reserve and switches on about 5 times per hour.
150 l tank, quiet
Air delivery of 310 l/min and a 150 l tank. Noise level of 72 dB makes it a choice that doesn't disturb much in a garage at home. However, at full load it switches on almost 10 times per hour, which is the upper limit.
Specific examples from our offer: Pro Line Extensive A29BT-2,2-200CM with an air delivery of 208 l/min and a 200 l tank, or ATMOS Perfect 2,2/150 EX with an air delivery of 310 l/min, 150 l tank and a noise level of 72 dB.
@produkty@(/kompresor-pro-line-extensive-a29bt-2-2-200cm/)(/pistovy-kompresor-perfect-2-2-150-e/)(/kompresor-pro-line-extensive-a39bt-2-2-150cm/)(/kompresor-pro-line-a39bp-2-2-150vm/)(/litinovy-pistovy-kompresor-gk420-22-200a/)(/kompresor-pro-line-extensive-a29bt-1-5-150cm/)(slider)
Ventilek advises
Don't be afraid of a tank with an adequate reserve. The bigger the air tank, the less the compressor cycles – and the longer the motor and the whole machine will last.
I also want to spray paint in the garage
Painting is a different league. Spray guns consume much more air and also require air that is clean and dry – that means dehumidification and filtration, so that no water or oil gets into the paint.
Summary
- Calculate your consumption. Add up the tools at 30 % utilisation and add a 30 % reserve.
- Pressure with reserve. Add 1.5 bar to the working 7 bar – the machine should be rated at least 9 bar (commonly 10 bar).
- Oil-lubricated compressor on 230 V. For a standard garage without a power supply.
- Tank of at least 90 l. Less cycling, longer service life.
- Painting in addition. More air and clean dry air – have it calculated by the calculator.
Don't want to calculate manually? Open the calculator, choose a 230 V socket and the „In a hurry, in stock only“ mode – you'll get machines that fit straight away and are ready to ship.
Frequently asked questions
- What compressor is suitable for a garage for common DIY use?
- A piston machine for 230 V with a tank of at least 100 l and a pressure of at least 9 bar (commonly 10 bar) will cover blow guns, inflating tyres, a stapler and an impact wrench.
- Why isn't a small tank enough?
- With the consumption described above, a compressor with a small tank would switch on more than 10× per hour, be noisy and wear out quickly.
- How do I verify the required output?
- Use our calculator on the Compressors page. You enter the tools and it calculates the required air delivery and pressure.
- Can I also paint in the garage?
- Yes, but you need more air and its treatment to make it clean and dry. Enter painting into the calculator and it will recalculate it for you.