ATMOS Perfect 2,2/150 EX piston compressor – 2.2 kW, 310 l/min cast-iron LB 30 pump unit · 10 bar · 150 l air receiver · 230 V
Code: P22150ECZ
Related products
Product detailed description
The ATMOS Perfect 2,2/150 EX is a piston compressor with a two-cylinder single-stage cast-iron LB 30 pump unit, on a horizontal 150 l air receiver. It delivers 310 l/min of compressed air at a pressure of up to 10 bar. It suits a smaller workshop, a garage or a tyre service: for inflating, blowing and tools with lower air consumption.
Technical specifications
| Parameter | Value |
|---|---|
| Piston pump unit | LB 30 |
| Cylinders and compression | 2 cylinders in a V layout, single-stage |
| Intake capacity | 420 l/min |
| Air output (FAD, ISO 1217) | 310 l/min |
| Cut-out / cut-in pressure | 10 / 8 bar |
| Air receiver | 150 l, horizontal |
| Electric motor | 2.2 kW, 230 V / 50 Hz, single-phase |
| Pump unit / motor speed | 1,180 / – rpm |
| Sound pressure level LpA | 72 dB(A) |
| Oil capacity | ATMOS VDL 100 |
| Dimensions (L × W × H) | 1,400 × 600 × 1,000 mm |
| Weight | 110 kg |
| Circuit breaker | 16 A (type D) |
| Supply cable | 3 × 2.5 mm² |
| Motor protection rating | IP54 |
| Ambient temperature | +5 to +40 °C |
| Warranty | 5 years with annual maintenance using an original kit |
Cast-iron LB 30 pump unit
The LB 30 pump unit has 2 cylinders of high-grade cast iron arranged in a V. It runs at only 1,180 revolutions per minute, so it wears less and heats up less. It is driven by an electric motor via a V-belt and cooled by a large fan and the finned cylinders.
Equipment
- pressure switch with motor overload protection — automatic start–stop operation
- air receiver pressure gauge and safety valve
- air filter on the pump unit intake
- condensate drain cock on the air receiver and ball valve at the outlet
- cooling fins on the cylinders and a large fan on the pulley
- cable with a plug for a 230 V socket
You can add a pressure regulator, compressed air filters and a refrigeration dryer for dry air.
Five-year unlimited warranty
ATMOS gives this compressor a five-year warranty on the whole machine, with no limit on running hours and no service contract. Register the machine within 90 days of purchase and carry out maintenance once a year with an original ATMOS service kit. You record the maintenance in the manufacturer’s app via the QR code from the kit — each record extends the warranty by another year.
Service kits for this compressor
Kits for the LB 30 pump unit by service year. The kits for year 1 and year 3 contain oil with an extractor, air filter cartridges and check valve parts; the kits for year 2 and year 4 also contain valve plates, gaskets and a belt.
Other Perfect 2,2 compressors
The same pump unit, a different version or air receiver:
| Model | Air receiver | Motor | Dimensions (L × W × H) | Weight |
|---|---|---|---|---|
| Perfect 2,2/90 EX | 90 l, horizontal | 2.2 kW, 230 V / 50 Hz, single-phase | 1,150 × 520 × 880 mm | 86 kg |
| Perfect 2,2/90 | 90 l, horizontal | 2.2 kW, 400 V / 50 Hz, three-phase | 1,150 × 520 × 880 mm | 90 kg |
| Perfect 2,2/150 | 150 l, horizontal | 2.2 kW, 400 V / 50 Hz, three-phase | 1,400 × 600 × 1,000 mm | 110 kg |
| Perfect 2,2/90 S | 90 l, vertical | 2.2 kW, 400 V / 50 Hz, three-phase | 815 × 560 × 1,220 mm | 98 kg |
Ventilek says
A horizontal air receiver is stable, and on its wheels the compressor can be moved. Place it so that it has at least half a metre of free space around it — the fan needs to draw in cool air.
You will find all machines of the range in the category ATMOS Perfect piston compressors.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 420 l/min |
| Air delivery: | 310 l/min |
| Pressure vessel volume: | 150 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1180 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 72 dB(A) |
| Accessories: | Wheels, Handle, Ball cock |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| In stock: | External warehouse |
| Piston unit: | LB 30 |
| Dimensions: | 1 400 x 600 x 1 000 mm |
| Weight: | 97 kg |
| Container outlet: | Ball valve 1/2" |
| Compressor switching pressure: | 8 bar |
| Compressor cut-out pressure: | 10 bars |
| Pressure difference: | 2 bars |
Jak vznikají české kompresory ATMOS: Pohled do výroby!
Product rating
Be the first who will post an article to this item!
ATMOS is a Czech family-owned compressor manufacturer, the company ATMOS Chrást s.r.o. from Chrást near Pilsen. It makes screw and piston compressors, its own screw blocks and generator sets, and besides stationary machines also mobile and locomotive compressors. It makes the blocks and air receivers itself, assembles and tests the machines in Chrást and exports them to more than 100 countries.
Engineering production in Chrást began in 1899, compressors have been made here for more than 70 years, and in 2024 the company celebrated its 125th anniversary. In the socialist era the works belonged to the state enterprise Škoda Plzeň; screw compressors arrived in the 1980s, at first under licence, and more than 25 new types have been added since. With us you will find the Perfect piston series for the workshop and the Albert, SEC and SmartTronic screw series for continuous operation.
Made in the Czech RepublicATMOS compressor series
Perfect — piston compressors
Cast-iron pump unit for the workshop. The cast-iron pump unit runs at low speed and copes with daily use. Since 2004 it has been working in tens of thousands of installations in the Czech Republic and abroad.
- 2.2 to 7.5 kW, 310 to 1,170 l/min
- horizontal or vertical receiver, 90 to 500 l
- two-stage machines for 12.5 and 14 bar
Albert — screw, 4 to 22 kW
From a small workshop to light production. The slow-running B100 or B150 screw block is coupled directly to the motor, with no belt.
- Komfort in a soundproof steel enclosure
- air receiver and dryer on the machine
- Vario with a frequency inverter
SEC — industrial, 22 to 37 kW
For continuous operation in production. A free-standing machine in a soundproofed steel enclosure, the air receiver is chosen separately.
- pressure 8, 10 or 13 bar
- IE3 motors and ATMOS screw blocks
- Vario with a frequency inverter
SmartTronic — 30 to 110 kW
A compressor station in one cabinet. The ATMOS flagship series for large industrial plants.
- free air delivery up to 19.1 m³/min
- pressure 7.5 to 13 bar
- FD version with a built-in fusion dryer
Service kits and oil
Everything for one service. Original kits for Perfect compressors for the 1st to 4th year, chosen by the machine’s pump unit.
- oil with extractor, filter elements, check valve parts
- for the 2nd and 4th year also valve plates and belt
- ATMOS VDL 100 oil for piston machines
Not sure whether you need a piston or a screw compressor? The selection calculator in the Compressors category will help you find the right output.
Choose a compressorATMOS series side by side
| Design, motor, pressure and equipment | ||||
|---|---|---|---|---|
| Series | Design | Motor | Pressure | Equipment |
| Perfect | piston, cast-iron pump unit | 2.2–7.5 kW | 10 · 12.5 · 14 bar | 90–500 l receiver, PFT version without receiver |
| Albert | screw, block directly on the motor | 4–22 kW | up to 13 bar | Komfort enclosure, receiver, dryer, Vario inverter |
| SEC | screw, free-standing | 22–37 kW | 8 · 10 · 13 bar | soundproofed enclosure, Vario inverter |
| SmartTronic | screw compressor station | 30–110 kW | 7.5–13 bar | FD fusion dryer, Vario inverter |
A piston compressor needs breaks; the air receiver gives it time to cool down. A screw compressor can run continuously.
How to choose an ATMOS compressor
1. Add up consumption
Add up the air consumption of the tools that will run at the same time and allow a reserve of about 30 %. Work with the machine’s free air delivery, not its intake capacity.
2. Piston or screw
For intermittent use in a workshop or garage, a Perfect piston compressor is enough. Where the compressor runs for most of the shift, choose an Albert, SEC or SmartTronic screw compressor.
3. Pressure and receiver
Most tools need 10 bar; the two-stage Perfect machines deliver 12.5 and 14 bar. A large receiver pays off when tools draw air in bursts: the machine then switches on less often.
4. Dry air and maintenance
For dry, clean air add a dryer and filters; on screw machines the dryer can be built into the compressor. Service a Perfect piston compressor once a year with an original service kit.
Frequently asked questions
- Who makes ATMOS compressors?
- The Czech family-owned company ATMOS Chrást s.r.o. at its plant in Chrást near Pilsen, where engineering production has been running since 1899. In the socialist era the plant belonged to the state enterprise Škoda Plzeň; from that time comes, for example, the 1982 PKD12 piston compressor under the ŠKODA brand. ATMOS makes its own screw blocks and air receivers, and assembles and tests the machines in Chrást.
- What does Vario in the name mean?
- A Vario machine has a frequency inverter that smoothly adjusts the speed of the screw block to the current air demand. The compressor does not run idle and, with variable demand, saves 20 to 30 % of electricity.
- What do the letters in the Albert series mean?
- K = Komfort in a soundproof steel enclosure, V = air receiver, S = built-in refrigeration dryer. For example, the E.50 KVS is an E.50 in the enclosure, with a receiver and a dryer.
- Which Perfect can I plug into a 230 V socket?
- The Perfect 2,2/90 EX and the Perfect 2,2/150 EX. The other Perfect compressors need a three-phase 400 V socket.
- Which oil goes into a Perfect compressor?
- ATMOS VDL 100 mineral compressor oil. Depending on the machine, the fill is 1 to 2 litres, and the oil comes with an extractor in every service kit.
- What is the FD fusion dryer in the SmartTronic series?
- A dryer built directly into the compressor that uses the machine’s waste heat for regeneration. You set the pressure dew point on the controller between +5 and −20 °C. The five largest models have no FD version.
The operating manual for Perfect compressors can be downloaded from the machine’s product page. ATMOS is a brand of ATMOS Chrást s.r.o.
| Manufacturing company : | ATMOS Chrást s.r.o. |
|---|---|
| Address : | Plzeňská 149, 330 03 Chrást, Czech Republic |
| E-mail : | info@atmos-chrast.cz |