Compressor Pro Line Expert A49BP-2.2-150CM, 150 l, 230 V Expert, motor power 2.2 kW, air intake 444 l/min, pressure 11 bar, air receiver 150 l, voltage 230/50 V/Hz, 93 dB Lwa / 73 dB at 4 m
Code: A49BP-2-2-150CM
Related products
Product detailed description
Expert · 150 l · 230 V · 444 l/min · 11 barA hundred and fifty litres at 11 bar for an ordinary socket. Under a single-phase 2.2 kW motor and the two-stage A49B pump the A49BP-2.2-150CM has a 150 l tank — 444 l/min at 1,050 rpm, 11 bar, 90 kg on castors. For a joiner's workshop or a workshop without 400 V, where a gun or a sander draws air in longer bursts.
Why 150 l with the 2.2 kW pump
The same pump as on the ninety, 444 l/min at 1,050 rpm, but a tank 60 l bigger and at 11 bar: a gun or a random orbital sander draws from the 150 l for longer and the single-phase motor starts less often, which is easier on the 230 V circuit. On the tank neck there is a filter-regulator with a gauge and two quick couplings — two hoses at once without a splitter and the condensate caught before it reaches the tool. At 90 kg the two front castors with brakes and the handle wheel the machine around the workshop. With the 2.2 kW motor count on 93 dB Lwa, 73 dB at 4 m.
Equipment and details
What the A49BP-2.2-150CM has from the factory
- two-stage twin-cylinder oil-lubricated A49B pump with an oil sight glass, V-belt drive under a moulded belt guard, 1,050 rpm
- single-phase 2.2 kW (3 hp) electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air intake 444 l/min, 11 bar, aftercooler on the pump outlet
- horizontal 150 l tank with a ball valve for draining condensate
- filter-regulator with a gauge and two DN 7.2 quick couplings on the tank neck, two gauges (tank and outlet)
- two front swivel castors with brakes, two rear wheels, closed handle with a rubber grip
- noise 93 dB Lwa, 73 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A49BP-2.2-150CM is not the right fit
The same tank on 400 V with a lower weight is the A49BP-2.2-150CT; a bigger reserve for the same socket is held by the A49BP-2.2-200CM. Both voltages and both motors for the 150 l are set side by side on the A49B range page; 150-litre machines of all brands are compared among compressors with a 150 l tank. In a joiner's workshop it pairs with blow guns.
Values apply to a 50 Hz supply. Air intake is the amount of air the pump draws in; how much of it reaches the tool depends on the pressure and the tank. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
A hundred and fifty litres at 11 bar from an ordinary socket — a gun and a sander in a joiner's workshop with no 400 V.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 11 bars |
| Suction power: | 444 l/min |
| Air delivery: | 333 l/min |
| Pressure vessel volume: | 150 L |
| Design of pressure vessel: | Lying down |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1050 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 93 dB - Lwa, 73 dB - Lwp(4m) |
| Weight: | 90 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler, Filtration |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| Dimensions: | 1 390 x 500 x 993 mm |
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Oil change at the compressor
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
