Intake filter for ABAC A49B
Code: FS-A49BRelated products
A two-stage pump on the A-series pulley — the step between workshop and industrial duty. Higher pressure than the single-stage pumps and more efficient compression.
The first two-stage machine in the category: eleven bar and cooler compression, yet still in the lowest assembly. An L1 cabinet on a 270 l receiver, 248 kg.
The same three-kilowatt pump as in the low assembly, but in the taller L2 cabinet with the controls on a separate column. The lightest machine in the category — 238 kg on a 270...
A two-stage machine in the smallest cabinet: 11 bar and thirty per cent more air than its single-stage neighbour. The L1 cabinet weighs 170 kg. No vessel of its own, for...
A three-kilowatt pump in the large L2 cabinet with a control panel and LED fault indication. The output is the same as the L1 version; what you gain is room inside and better...
The biggest motor on 200 l: the A49B pump with 4 kW draws in 595 l/min at 1,400 rpm, 11 bar, 125 kg. A tank you can still wheel on the handle and braked castors; two quick...
The most air that fits into the low assembly on a 270 l receiver. A four-kilowatt two-stage pump in an L1 cabinet, 248 kg.
The most air of all the narrow assemblies — a five-hundred-litre receiver at a width of just 580 mm. A four-kilowatt two-stage pump, L1 cabinet, 274 kg.
The most air that fits into the small cabinet: 598 l/min from a four-kilowatt pump, an L1 cabinet weighing 170 kg. No vessel of its own, for pipework or a separate receiver.
Two-stage A49B pump with 2.2 kW on 400 V: 444 l/min at 1,050 rpm, 11 bar, 150 l tank on castors, 114 kg. Intercooler, aftercooler, regulator, DN 7.2 quick coupling; 91 dB Lwa /...
The only Extensive in the range: the A49B pump with 4 kW puts 595 l/min at 1,400 rpm into 270 l at 11 bar, 145 kg. One front castor with a brake, open handle, aftercooler, one...
The smallest A49B for a 230 V socket: the pump with 2.2 kW draws in 444 l/min at 1,050 rpm, 11 bar, 90 l, 67 kg. An Expert with a handle, two front castors with brakes and a...
The lightest A49B — 65 kg on 400 V: the pump with 2.2 kW draws in 444 l/min at 1,050 rpm, 11 bar, 90 l. Handle, two front castors with brakes, filter-regulator next to the...
The 150 for a 230 V socket, 90 kg: the two-stage A49B pump with 2.2 kW gives 444 l/min at 1,050 rpm, 11 bar. Handle, two front castors with brakes, two quick couplings on the...
The three-phase 150, 78 kg: the A49B pump with 2.2 kW draws in 444 l/min at 1,050 rpm, 11 bar, 150 l. An Expert with a handle, two castors with brakes and two quick couplings;...
The 200 for a 230 V socket, 130 kg: the A49B pump with 2.2 kW draws in 444 l/min at 1,050 rpm, 11 bar. Two quick couplings on the tank neck, a handle and brakes at the front;...
Product detailed description
Suction filter for compressors ABAC A49B
- The suction filter serves as protection against dirt entering the machine and should be replaced regularly
- ABAC compressors are supplied with suction filters as standard accessories
Additional parameters
| Category: | Intake filters for compressors: the air filter on the inlet |
|---|---|
| Filter type: | Complete filter |
| Designed for compressor: | A49B |
Údržba sacího filtru
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.

Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.

Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.

A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.

Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
