Compressor Pro Line Extensive A29BT-2.2-150CM, 150 l, 230 V Extensive, motor power 2.2 kW, air intake 320 l/min, pressure 10 bar, air receiver 150 l, voltage 230/50 V/Hz, 95 dB Lwa / 75 dB at 4 m
Code: A29BT-2-2-150CM
Related products
Product detailed description
Extensive · 150 l · 230 V · 320 l/minA full 320 l/min for an ordinary socket — and 22 kg lighter than the 200 with the same motor. The A29BT-2.2-150CM: the A29B pump, a single-phase 2.2 kW motor and a 150 l tank — from a 230 V socket it draws in 320 l/min at 1,300 rpm, 10 bar, 80 kg. For a workshop without a three-phase supply, where spraying, sanding and tightening take turns during the day and the machine has its place by the wall.
Why 2.2 kW and 150 l for a 230 V socket
The single-phase 2.2 kW motor is the strongest the A29B range offers for an ordinary socket, and it needs a short, adequately rated lead so that start-up does not trip the breaker. The 150 l tank then holds a reserve for a gun or a sander for longer before the pump with 320 l/min cuts in. The machine is 1,362 mm long and weighs 80 kg — it belongs in one place: you push it there on its one front castor, by the open handle, and put the brake on. Noise: 95 dB Lwa, 75 dB at 4 m from the machine.
Equipment and details
What the A29BT-2.2-150CM has from the factory
- single-stage twin-cylinder oil-lubricated A29B pump with an oil sight glass, V-belt drive under a moulded belt guard, 1,300 rpm
- single-phase 2.2 kW (3 hp) electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air intake 320 l/min, 10 bar, aftercooler on the pump outlet
- horizontal 150 l tank with a ball valve for draining condensate
- pressure regulator, two gauges (tank and outlet) and a DN 7.2 quick coupling
- one front swivel castor with a brake, two 200 mm rear wheels, open tubular handle
- noise 95 dB Lwa, 75 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A29BT-2.2-150CM is not the right fit
The same machine on 400 V is the A29BT-2.2-150CT, with the smaller 1.5 kW motor for the same socket the A29BT-1.5-150CM. The siblings with a different tank and motor are compared on the A29B range page; 150-litre machines of all brands are among compressors with a 150 l tank. For longer spraying add a regulator with a filter at the workstation and a spray gun.
Values apply to a 50 Hz supply. Air intake is the amount of air the pump draws in. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
A full 320 l/min and 150 l without a three-phase supply, at 80 kg — just keep the lead short and the breaker properly rated.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 320 l/min |
| Air delivery: | 208 l/min |
| Pressure vessel volume: | 150 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1,300 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 95 dB - Lwa, 75 dB - Lwp(4m) |
| Weight: | 80 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| Dimensions: | 1 362 x 500 x 971 mm |
ABAC PRO - A29B Piston Compressor
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Oil change at the compressor
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
