Vertical compressor Pro Line Expert A39BP-2.2-150VM, 150 l, 230 V Vertical 150 l tank, 230 V, 2.2 kW motor, air intake 393 l/min at 1,050 rpm, 10 bar, 95 dB Lwa / 75 dB at 4 m
Code: A39BP-2-2-150VM
Related products
Product detailed description
A39B · vertical 150 l · 393 l/min · 10 bar · 230 VThe smallest vertical machine of the range and the only single-stage one. The A39BP-2.2-150VM draws in 393 l/min with the A39B pump and a 2.2 kW motor for a 230 V socket and fills a vertical 150 l tank to 10 bar — on a footprint of 832 × 472 mm, where a horizontal machine would not fit. Noise 95 dB Lwa, 75 dB at 4 m. For a garage or trade workshop with blowing off, tyre inflation and the occasional spraying job.
Why a single-stage pump for the socket
The A39B pump compresses the air in one stage and fills the tank to 10 bar — enough for a blow gun, tyre inflation and spraying smaller parts, and the 2.2 kW motor runs from an ordinary 230 V socket. The 150 l tank standing on end holds a reserve for work in bursts and takes up a strip of garage floor under half a metre wide. If you sand or spray longer pieces in one go, you need the two-stage A49B with 270 l at 11 bar; if you want to wheel the machine about, the horizontal version on castors. The air leaves through a ball valve on the side of the tank; the regulator with a filter belongs on the hose at the workstation.
Equipment and details
What the A39BP-2.2-150VM has from the factory
- single-stage A39B pump, oil-lubricated, with an oil sight glass; V-belt drive geared down to 1,050 rpm, belt guard
- single-phase 2.2 kW (3 hp) electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch with a gauge
- intake 393 l/min, 10 bar, aftercooler on the pump outlet
- vertical 150 l tank on three legs with holes for bolting down, condensate drain valve in the bottom; air outlet through a ball valve on the side of the tank (regulator, filter and quick couplings at the workstation)
- noise 95 dB Lwa, 75 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty (extension to 3 years at extra cost), 10 years on the tank against rusting through
Machine details
Where next if the A39BP-2.2-150VM is not the right fit
You get the same pump and the same 150 l with the horizontal A39BP-2.2-150CM on castors; more air from the same socket comes from the two-stage A49BP-2.2-270VM. Single-phase machines of all brands are grouped together among 230 V compressors; the siblings on 400 V are in the table of vertical machines. On the hose from the ball valve go blow guns.
Values apply to a 50 Hz supply. Intake is the amount of air the pump draws in; how much of it reaches the tool depends on the pressure and the tank. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. The dimensions are those of the machine without packaging. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
For a garage on a single phase where you blow off, inflate and occasionally spray: 393 l/min at 10 bar and a machine that stands in the corner on under half a square metre.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 393 l/min |
| Air delivery: | 255 l/min |
| Pressure vessel volume: | 150 L |
| Design of pressure vessel: | Standing |
| Connecting: | Ball valve 1/2" |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1050 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 95 dB - Lwa, 75 dB - Lwp(4m) |
| Weight: | 120 kg |
| Accessories: | Ball cock |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional, Industrial |
| Development: | Stationary |
| In stock: | External warehouse |
| Dimensions: | 832 × 472 × 1 700 mm |
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Oil change at the compressor
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
