Stationary piston and screw compressors
Stationary compressors are above all high-output machines with a heavy pump (often of quality cast iron) and a large tank – simply machines that, given their weight, have to stand firmly in place. Stationary machines can be piston or screw, and if we may advise, look at the article How to choose a compressor. You will easily find out whether a big, powerful machine is the right choice for your operation – a car service, tyre service or larger workshop, for instance. With these compressor types we also recommend air treatment such as filters and dryers.
-
Black Wind piston compressors
-
ATMOS piston compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
.png)
Product sorting
List of products
A two-stage pump on the A-series pulley — the step between workshop and industrial duty. Higher pressure than the single-stage pumps and more efficient compression.
The smallest pump in a sound canopy. 64 dB(A) instead of 71, a 30 l receiver inside, 68 kilos.
The entry-level two-stage pump of the B series. For duty where the compressor runs most of the shift and consumption is steady.
The highest-output single-stage pump in the range. For a workshop in daily use where one tool follows another.
The best output-to-input ratio in the range: 8 % more power than the 3 kW but 59 % more air. 510 l/min, same enclosure and weight.
The smallest pump in the A series. Suits smaller workshops where the compressor runs intermittently — blowing down, inflating and light air tools.
A mid-range single-stage pump for a workshop in regular use — spraying, impact wrenches, longer draws.
Compressor, dryer and 200 l receiver on one frame in 0.82 m². The entry 3-in-1 package delivering 320 l/min, with no assembly certification needed.
The same unit and tank as the horizontal WK650, just standing upright: a footprint of 65 × 70 cm instead of 165 cm of length. Its 550 l/min air delivery covers painting plus a...
The three-cylinder class with the largest reserve, for operations that draw air in heavy bursts: sandblasting smaller parts, filling, blowing down a line. The 740 l/min air...
Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...
The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.
A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.
The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.
The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...
The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).
The middle 8-in-1 package. To the 270 l receiver, dryer and pre-filter it adds a micro-filter, an activated-carbon filter and a condensate separator — the air exceeds class 1-4-1.
An 8-in-1 package with a 500 litre vessel. The cleanest air plus a large reserve — for plants that draw in bursts and cannot have oil in the air.
The top of the range. Highest output, largest vessel and the fullest equipment — two thousand litres a minute, 500 l of reserve and air that exceeds class 1-4-1.
Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...