Pressure vessels and air receivers for compressed air

Pressure vessels and air receivers from 5 to 10000 litres for compressed air and nitrogen, in special versions also for oxygen and other group 1 fluids, for pressures up to 42 bar and for vacuum. An air receiver downstream of the compressor holds a reserve of air and evens out fluctuating demand, so the compressor does not start as often.
The vessels are made by the Italian Baglioni group from carbon steel or from AISI304 and AISI316L stainless steel. You can choose from vertical and horizontal vessels, painted in blue RAL 5015, hot-dip galvanised, with an ALM internal coating for the food industry or in stainless steel, stand-alone or fully equipped with fittings.
Category overview
The vessels are divided by volume and application. Each category has its own table of dimensions, connections and weights, as well as drawings.
| Pressure vessels and air receivers — categories | |||||
|---|---|---|---|---|---|
| Category | Volume | Working pressure | Design | Finish | Products |
| Small vessels up to 50 l | 5–50 l | 11 bar | vertical, horizontal with or without feet | RAL 5015 paint | 13 |
| Vessels from 100 to 720 l | 100–720 l | 11 and 16 bar | vertical and horizontal | paint, zinc, ALM | 15 |
| Vessels from 1000 to 3000 l | 1000–3000 l | 12 and 16 bar | vertical and horizontal | paint, zinc, ALM | 15 |
| Fully equipped vessels with fittings | 100–3000 l | 11 and 12 bar | vertical | paint, zinc | 9 |
| Vessels down to −20 °C and for group 1 fluids | 1000–10000 l | 8, 12 and 16 bar | vertical | paint, zinc, ALM | 20 |
| Vacuum vessels | 100–3000 l | vacuum down to −1 bar | vertical | RAL 5015 paint | 6 |
| Oxygen vessels | 500–5000 l | 11 and 12 bar | vertical | white RAL 9010 paint, ALM inside | 7 |
| Stainless vessels | 5–3000 l | 11 and 12 bar | vertical and horizontal | AISI304 and AISI316L stainless steel | 22 |
| High-pressure vessels for 32 and 42 bar | 100–5000 l | 32 and 42 bar | vertical | paint, zinc | 19 |
For stand-alone vessels, there are safety valves, pressure gauges and shut-off valves in kits as well as connecting hoses to the compressor, 59 items in total among our fittings kits and connecting hoses.
#showmore#
Choose by parameter
You will also find vessels of the same volume, design, finish, regulation or pressure together, across all categories. The number shows how many vessels the page lists.
By volume
| Pressure vessels by volume | |||
|---|---|---|---|
| Volume | Vessels | Design | Working pressure |
| 5 l | 3 | horizontal | 11 bar |
| 10 l | 3 | horizontal | 11 and 12 bar |
| 15 l | 3 | horizontal | 11 and 12 bar |
| 24 l | 6 | vertical and horizontal | 11 bar |
| 50 l | 5 | vertical and horizontal | 11 bar |
| 100 l | 10 | vertical and horizontal | 11, 32 and 42 bar, also vacuum |
| 150 l | 3 | vertical and horizontal | 11 bar |
| 200 l | 8 | vertical and horizontal | 11 and 42 bar |
| 270 l | 12 | vertical and horizontal | 11, 16, 32 and 42 bar, also vacuum |
| 500 l | 13 | vertical and horizontal | 11, 16, 32 and 42 bar, also vacuum |
| 720 l | 5 | vertical and horizontal | 11 bar |
| 1000 l | 15 | vertical and horizontal | 11, 12, 16, 32 and 42 bar, also vacuum |
| 1500 l | 12 | vertical and horizontal | 11, 12, 16, 32 and 42 bar |
| 2000 l | 14 | vertical and horizontal | 11, 12, 16, 32 and 42 bar, also vacuum |
| 3000 l | 14 | vertical and horizontal | 11, 12, 16, 32 and 42 bar, also vacuum |
| 4000 l | 5 | vertical | 12, 16, 32 and 42 bar |
| 5000 l | 6 | vertical | 8, 12, 16, 32 and 42 bar |
| 6000 l | 2 | vertical | 12 and 16 bar |
| 8000 l | 2 | vertical | 8 and 12 bar |
| 10000 l | 3 | vertical | 8, 12 and 16 bar |
By design and finish
| Pressure vessels by design and finish | ||
|---|---|---|
| What you need | Vessels | What for |
| Vertical vessels | 89 | take up the least floor space |
| Horizontal vessels with feet | 32 | under a lower ceiling or platform |
| Horizontal vessels without feet | 5 | for building into your own assembly |
| Painted vessels | 112 | for dry, heated rooms |
| Galvanised vessels | 78 | for damp conditions and operations with a lot of condensate |
| Vessels with ALM coating | 38 | for contact with food and for oxygen |
| Vessels with no coating | 23 | mainly stainless steel vessels for clean air |
By directive and standard
| Pressure vessels by directive and standard | ||
|---|---|---|
| Regulation | Vessels | Which vessels |
| Directive 2014/68/EU (PED) | 87 | large, stainless steel, high-pressure and oxygen vessels |
| Directive 2014/29/EU (SPVD) | 33 | standard small and medium-sized vessels |
| EN 286-1 standard | 6 | vacuum vessels, no CE marking |
By working pressure
How to choose an air receiver
Volume
The size of the air receiver depends on the compressor output and on how the air demand varies. The more the demand fluctuates and the more often the compressor starts, the more it pays to choose a larger vessel. How to calculate the size is shown in our advice centre on choosing and connecting an air receiver.
Working pressure
The maximum pressure the compressor delivers into the vessel must not exceed the pressure on the vessel’s data plate. Vessels for 11 or 12 bar suit compressors up to 10 bar, while a compressor with a cut-out pressure of 13 or 15 bar needs a 16-bar vessel. A high-pressure 30-bar compressor needs a 32-bar vessel, and a 40-bar compressor a 42-bar vessel.
Vertical or horizontal
A vertical vessel takes up the least floor space but is tall. A horizontal one is low and fits under a lower ceiling or under a platform; small horizontal vessels are also made without feet, for building into your own assembly.



Paint, zinc, ALM coating or stainless steel
Painted vessels have a blue RAL 5015 powder coating on the outside and bare steel inside, and they suit dry, heated rooms. Galvanised vessels are hot-dip galvanised inside and out, so condensate cannot corrode the steel, and they belong in damp conditions. Vessels with the ALM internal epoxy coating are intended for applications where the air comes into contact with food and, with white RAL 9010 paint on the outside, also for oxygen. Stainless steel vessels have no coating, are pickled and passivated inside and out, and are chosen where air purity matters.



Stand-alone or fully equipped
A stand-alone vessel is delivered without fittings and needs a safety valve, a pressure gauge, shut-off valves and a condensate drain for operation — most easily as a ready-made kit from the overview above. A fully equipped vessel is ready to connect: the valves, the pressure gauge and the safety valve set to 10.5 bar are already mounted, and it comes with TÜV certification of the pressure assembly.
Documents and inspections
Vessels for compressed air bear the CE marking and come with a declaration of conformity and instructions for use and maintenance. Standard small and medium-sized vessels comply with Directive 2014/29/EU on simple pressure vessels. Large, stainless steel, high-pressure and oxygen vessels comply with Directive 2014/68/EU on pressure equipment. Vacuum vessels fall under neither of them and do not bear the CE marking.
Inspections and their intervals are set by national regulations according to the vessel’s volume and pressure. What an operator in the Czech Republic must arrange is covered in our article on the obligations of a pressure vessel operator, and how much an inspection costs is shown in our article on inspection prices.
Ventilek’s tip
Drain the condensate every day. Water condenses from humid air inside the air receiver. If it stays at the bottom, it rusts a painted vessel from the inside and is carried along with the air into the pipework.
- Is an air receiver the same as a pressure vessel?
- Yes. An air receiver is a pressure vessel for compressed air, also known as an air tank. What counts as a pressure vessel is explained in our article on pressure vessels.
- What size of air receiver do I need?
- That depends on the compressor output and on how the air demand varies. High demand and peak demand need a larger vessel; the calculation method is in the advice centre linked in the section on volume.
- When do I need a 16-bar vessel?
- When the compressor cuts out above 10 bar, typically at 13 or 15 bar. The pressure on the vessel’s data plate must always be at least as high as the maximum pressure the compressor delivers into it.
- What else do I need for a stand-alone vessel?
- A safety valve, a pressure gauge, shut-off valves and a condensate drain valve or an automatic condensate drain. For vertical vessels from 100 to 3000 l, there are ready-made fittings kits.
- Are there vessels for nitrogen and oxygen too?
- For nitrogen, yes: standard vessels are intended for compressed air and nitrogen alike. Oxygen and other group 1 fluids except hydrogen can be held by the oxygen vessels, the vessels rated down to −20 °C and the high-pressure vessels.
- Which vessel do I need for a 30-bar or 40-bar compressor?
- A 32-bar vessel for a 30-bar compressor and a 42-bar vessel for a 40-bar compressor. You will find both series among the high-pressure vessels in the category overview.
- Do you also have stainless steel vessels?
- Yes, vertical ones from 24 to 3000 l and horizontal ones from 5 to 1000 l, in AISI304 or AISI316L steel, for 11 and 12 bar. There is no coating inside that could peel off.
- Does the vessel need regular inspections?
- Depending on its volume and pressure, yes. The intervals and types of inspection are set by national regulations; details are in the articles linked in the section Documents and inspections.
You will find compressors with and without a vessel in our overview of compressors.
-
Pressure vessels up to 50 l
-
Pressure vessels 100-720 l
-
Pressure vessels up to 3000 l
-
Pressure vessels equipped
-
Fittings kits and hoses
-
Vessels down to −20 °C
-
Vacuum vessels
-
Oxygen vessels
-
Stainless vessels
-
High-pressure vessels
Bestsellers
Product sorting
List of products
A kit for mounting an expansion or pressure vessel on a wall: a steel bracket with rubber inserts, a stainless steel clamping band with a quick-release fastener, 2 screws, 4...
The largest of the small horizontal air receivers, with two top connections, so you can fit both the safety valve and the pressure gauge without branch fittings. It suits a...
A short 1/2" rubber hose with straight ends for connecting a compressor to an air receiver or dryer standing right beside it. Rated at 20 bar, with swivel nuts and two adaptors.
A 1/2" rubber hose, 1.5 m long, with straight ends for connecting a compressor, air receiver and dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A long 3/4" rubber hose with a 90° elbow at one end for a connection over a greater distance. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
An air receiver for built-in use where length is limited: it holds 50% more air than the 10-litre version and is less than two centimetres longer. Without feet, it fits into a...
A short 1/2" rubber hose with one straight end and a 90° elbow at the other for connecting a compressor to an air receiver in a tight space. Working pressure 20 bar, two...
A 1" rubber hose with straight ends, 1.5 m long, for connecting a screw compressor to an air receiver or dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.
Fittings for a painted vertical 200 l vessel: a safety valve set to 10.5 bar, a pressure gauge with a scale up to 16 bar, two ball valves, a condensate drain valve, reducers,...
A small horizontal air receiver that already has a top connection for a pressure gauge or safety valve. It stands on two feet with bolt holes and fits under a workbench or on a...
A long 1 1/4" rubber hose with straight ends for connecting a more powerful compressor to an air receiver. Working pressure 20 bar, two adaptors supplied.
A two-metre 3/4" rubber hose with straight ends for connecting a compressor, air receiver and dryer. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
A two-metre 1 1/4" rubber hose with straight ends for more powerful compressors. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
A 1 1/4" rubber hose, 1.5 m long, with straight ends for a larger compressor station. It connects the compressor to an air receiver or dryer; working pressure 20 bar, two...
A vertical air receiver that fits even into a narrow corner of the workshop. It stands on legs, and you can feed air into it from above, from below or from the side.
A 10-litre cylinder without feet for a machine frame or cabinet where feet would get in the way. It has a top connection for a pressure gauge or safety valve and a bottom one...
The largest air receiver for built-in use in this category, with two top connections of the same size. It suits a machine frame or assembly that needs a large air reserve...
A horizontal air receiver for places where length is limited but a slightly wider vessel is no problem. Compared with the 10-litre version, it holds 50% more air at almost the...
A horizontal vessel on two feet, made of unpainted steel and sold as a clearance item. It suits applications where you finish the surface yourself, for example in the same...
The smallest air receiver for built-in use, a smooth cylinder without feet. You mount it with clamps in a frame, a cabinet or a small pneumatic device.
The smallest air receiver with feet, both with bolt holes. It fits on a shelf, in a crate or under a workbench and serves as a small air reserve or a buffer volume.
A vertical air receiver with twice the air reserve of the 24-litre version, while still needing little floor space. The taller legs leave room under the bottom end for a...
An air receiver without feet, with the volume typical of small compressor tanks. It suits a custom assembly where the vessel is to lie in a frame, or serves as a built-in air...
A long 1" rubber hose with straight ends for connecting a compressor to an air receiver or to the start of the pipework. Working pressure 20 bar; swivel nuts and two adaptors...
A 1" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.
Fittings for a painted vertical 270 l vessel: a safety valve set to 10.5 bar, a pressure gauge, two ball valves for the inlet and outlet, a condensate drain valve and mounting...
A 3/4" rubber hose, 1.5 m long, with a 90° elbow at one end for connecting a compressor to an air receiver. Working pressure 20 bar; swivel nuts and two male-thread adaptors...
A long 3/4" rubber hose with straight ends for connecting a compressor to an air receiver over a greater distance. Working pressure 20 bar, two adaptors supplied.
A 1/2" rubber hose, 1.5 m long, with one end bent at 90° for connecting a compressor, air receiver and dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.
Fittings for a painted vertical 500 l vessel: a higher-flow safety valve set to 10.5 bar, a large pressure gauge with a test cock, two ball valves, a condensate drain valve and...
A long 1 1/2" rubber hose with straight ends for connecting a compressor to an air receiver over a greater distance. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A 1 1/2" rubber hose, 1.5 m long, with straight ends for compressor stations. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
A one-metre 3/4" rubber hose with straight ends for a short connection between a compressor and an air receiver. Working pressure 20 bar, supplied with swivel nuts and two...