Customer support:+420 311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    EUR
    Language
    English
    Home / Hoses / Connecting hoses / Crimped connecting hose with elbow 1/2" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied

    Crimped connecting hose with elbow 1/2" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied

    Code: FPL12-1-5
    Not rated Rating details
    €29 –3 %
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €29 –3 % €28,13 / pcs €23,25 excl. VAT Measure price:
    up to 14 days
    Delivery to:
    17.11.2026
    Delivery options

    A 1/2" rubber hose, 1.5 m long, with one end bent at 90° for connecting a compressor, air receiver and dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.

    Detailed information

    Free shipping
    Free shipping
    For purchases over 5,000 CZK
    We guarantee
    We guarantee
    Extended warranty and service
    Discount voucher
    Discount voucher
    For every purchase
    Return of goods within 30 days
    Return of goods within 30 days
    Completely at our expense

    Related products

    Vystrojená stojatá tlaková nádoba lakovaná modrou RAL 5015 s kohouty a manometrem (ilustrační obrázek, sestava 270 l se stejnými armaturami)
    Tip
    FREEFREE from €987,22 –3 %
    Vertical pressure vessel with fittings 100 l - 11 bar Ø 370 × 1289 mm · 32 kg · ball valves 3/4"
    up to 14 days
    from €791,41 excl. VAT
    from €957,61

    A TÜV-certified 100 l vertical air receiver with ball valves, a pressure gauge and a safety valve set to 10.5 bar already mounted. It works well as an additional reservoir for a...

    Code: VVP2-100-11A
    Tlaková nádoba stojatá 50 l - 11 bar
    €332,67 –3 %
    Vertical pressure vessel 50 l - 11 bar Ø 305 × 929 mm · 19 kg · connections 1/2" and 3/8"
    Stock (3 pcs)
    €266,69 excl. VAT
    €322,69

    A vertical air receiver with twice the air reserve of the 24-litre version, while still needing little floor space. The taller legs leave room under the bottom end for a...

    Code: VVP50-11
    Tlaková nádoba ležatá 2 000 l - 12 bar
    FREEFREE from €3 924,40 –3 %
    Horizontal pressure vessel 2000 l - 12 bar Ø 1100 × 2252 mm · 394 kg · connections 2" and 1/2"
    up to 20 days
    from €3 146,01 excl. VAT
    from €3 806,67

    A horizontal air receiver with twice the volume of the 1000-litre vessel and almost the same length. It comes painted, galvanised or with a food-grade internal coating.

    Code: VHP2000-12
    Vystrojená stojatá tlaková nádoba lakovaná modrou RAL 5015 s kohouty a manometrem
    Tip
    FREEFREE from €2 806,23 –3 %
    Vertical pressure vessel with fittings 1000 l - 12 bar Ø 800 × 2373 mm · 216 kg · ball valves 1 1/2"
    Stock (4 pcs)
    from €2 249,62 excl. VAT
    from €2 722,04

    A TÜV-certified 1000 l vertical air receiver with ball valves, a pressure gauge with a test cock and a safety valve set to 10.5 bar already mounted. The main air reserve...

    Code: VVP2-1000-12A
    vhp 50 tlakova nadoba vzdusnik lakovana lezata
    €200,66 –3 %
    Horizontal pressure vessel 15 l with feet - 11 bar Ø 196 × 522 mm · 9 kg · connections 1/2" and 3/8"
    Stock (11 pcs)
    €160,86 excl. VAT
    €194,64

    A horizontal air receiver for places where length is limited but a slightly wider vessel is no problem. Compared with the 10-litre version, it holds 50% more air at almost the...

    Code: VHP15-11
    Tlaková nádoba stojatá 1 500 l - 42 bar
    New REQUEST
    FREEFREE
    Vertical pressure vessel 1500 l - 42 bar Ø 1000 × 2305 mm · 1100 kg · connections 2" and 1/2"
    up to 20 days
    €0,04 excl. VAT
    €0,05

    A vertical high-pressure vessel, 1500 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Wider and lower than the 1000-litre vessel.

    Code: VVP1500-42
    Tlaková nádoba stojatá 100 l - 32 bar
    New
    FREEFREE from €3 348,31 –3 %
    Vertical pressure vessel 100 l - 32 bar Ø 370 × 1213 mm · 89 kg · connections 2", 3/4" and 3/8"
    up to 20 days
    from €2 684,18 excl. VAT
    from €3 247,86

    A vertical high-pressure vessel, 100 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. The smallest size in the series, for a small 30-bar...

    Code: VVP100-32
    Tlaková nádoba stojatá pro nízké teploty a tekutiny 10 000 l - 8 bar
    REQUEST
    FREEFREE from €5 669,27 –100 %
    Vertical low-temperature pressure vessel for fluids 10000 l - 8 bar Ø 1650 × 5118 mm · 1730 kg · connections 3", 2", 3/4" and 3/8"
    up to 30 days
    €0,04 excl. VAT
    €0,05

    The largest 8-bar vertical air receiver, for large reserves of air or gas in lower-pressure networks, outdoors or in unheated halls at temperatures down to −20 °C. It comes in...

    Code: VVP10000-8
    Nerezová tlaková nádoba stojatá 500 l - 11 bar
    New
    FREEFREE from €0,05 up to –3 %
    Vertical stainless steel pressure vessel 500 l - 11 bar Ø 600 × 2061 mm · 125 kg · connections 1", 1/2" and 3/8"
    up to 20 days
    from €0,04 excl. VAT
    from €0,05

    A vertical stainless steel pressure vessel, 500 l at 11 bar, in AISI304 or AISI316L steel. Pickled and passivated, with no coating, manufactured to the Pressure Equipment...

    Code: VVX500-11
    Tlaková nádoba ležatá 270 l - 16 bar
    FREEFREE €1 176,04 –3 %
    Horizontal pressure vessel 270 l - 16 bar Ø 500 × 1484 mm · 104 kg · connections 2", 1", 1/2" and 3/8"
    up to 20 days
    €942,77 excl. VAT
    €1 140,75

    A 16-bar horizontal air receiver for compressors that cut out at 13 or 15 bar. It is low, stands on two feet and has its connections in the same places as the 11-bar version.

    Code: VHP270-16
    Tlaková nádoba stojatá 270 l - 32 bar
    New
    FREEFREE from €5 922,37 –3 %
    Vertical pressure vessel 270 l - 32 bar Ø 500 × 1648 mm · 192 kg · connections 2", 1" and 3/8"
    up to 20 days
    from €4 747,69 excl. VAT
    from €5 744,70

    A vertical high-pressure vessel, 270 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Four side connections make it easy to connect both...

    Code: VVP270-32
    Tlaková nádoba stojatá 1 000 l - 42 bar
    New REQUEST
    FREEFREE
    Vertical pressure vessel 1000 l - 42 bar Ø 800 × 2350 mm · 675 kg · connections 2" and 3/8"
    up to 20 days
    €0,04 excl. VAT
    €0,05

    A vertical high-pressure vessel, 1000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. A large volume for pipework with a pressure of up...

    Code: VVP1000-42
    Tlaková nádoba stojatá 500 l - 32 bar
    New
    FREEFREE from €7 313,07 –3 %
    Vertical pressure vessel 500 l - 32 bar Ø 600 × 2050 mm · 308 kg · connections 2" and 1/2"
    up to 20 days
    from €5 862,55 excl. VAT
    from €7 093,68

    A vertical high-pressure vessel, 500 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Large connections for the main pipework.

    Code: VVP500-32
    Vystrojená stojatá tlaková nádoba lakovaná modrou RAL 5015 s kohouty a manometrem
    Tip
    FREEFREE from €1 850,73 –3 %
    Vertical pressure vessel with fittings 500 l - 11 bar Ø 600 × 2064 mm · 117 kg · ball valves 1"
    up to 14 days
    from €1 483,64 excl. VAT
    from €1 795,21

    A TÜV-certified 500 l vertical air receiver with ball valves, a pressure gauge with a test cock and a safety valve set to 10.5 bar already mounted. The main air reserve...

    Code: VVP2-500-11A
    vlp 50 tlakova nadoba vzdusnik lakovana lezata
    FREEFREE €343,23 –3 %
    Horizontal pressure vessel 24 l without feet - 11 bar Ø 240 × 592 mm · 9 kg · connections 1/2" and 3/8"
    Stock (3 pcs)
    €275,15 excl. VAT
    €332,93

    An air receiver without feet, with the volume typical of small compressor tanks. It suits a custom assembly where the vessel is to lie in a frame, or serves as a built-in air...

    Code: VLP24-11
    Tlaková nádoba stojatá pro nízké teploty a tekutiny 4 000 l - 16 bar
    REQUEST
    FREEFREE from €5 669,27 –100 %
    Vertical low-temperature pressure vessel for fluids 4000 l - 16 bar Ø 1450 × 2790 mm · 995 kg · connections 3", 2", 3/4" and 3/8"
    up to 20 days
    €0,04 excl. VAT
    €0,05

    A large 16-bar vertical air receiver for compressor stations with a higher pressure and for gases stored at a higher pressure, in environments with temperatures down to −20 °C....

    Code: VVP4000-16
    Show all related products Previous product Next product

    Product detailed description

    90° elbowRubber connecting hose with one straight end and the other bent at 90°

    A 1/2" hose with a 90° elbow, 1.5 metres long. The elbow lets the hose turn away from the connection right at the wall or the vessel.

    1/2"thread
    DN 12nominal bore
    1.5 mlength
    20 barworking pressure

    Specifications

    Close-up of the crimped end fitting of a hose with a 90° elbow and swivel nut
    90° elbow with swivel nut
    FPL12-1-5 — specifications
    ThreadG 1/2"
    Nominal boreDN 12
    Length1500 mm
    End fittingsone straight, the other with a 90° elbow, swivel nuts with female thread
    Working pressure20 bar
    Working temperature−40 to +100 °C
    Hoserubber, crimped end fittings
    Resistant tocompressor oil, condensate
    Scope of supplyhose and 2 adaptors with G 1/2" male thread

    Typical uses

    A 1/2" hose with an elbow suits smaller compressors and dryers where the connection faces a wall or the vessel and a hose with a straight end fitting would have to be bent immediately.

    The next length down is FPL12-1-0, and the next length up is FPL12-2-0. The version with straight ends is FP12-1-5.

    Ventilek’s tip

    Position the elbow before tightening. The swivel nut lets you turn the elbow in the required direction. Only then tighten the nut, and the hose will not twist.

    Additional parameters

    Category: Connecting hoses crimped including fittings
    Pressure: 20 bar
    Barva: Black
    End design: Straight and corner end
    Lightness: DN 12
    Temperature: -40/+100 °C
    Inner diameter: 12 mm
    Threads: 1/2"
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €220,45 –3 %
    Crimped connecting hose 1 1/2" - 2 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (1 pcs)
    €176,73 excl. VAT
    €213,84

    A two-metre 1 1/2" rubber hose with straight ends for larger compressor stations. It connects the compressor, air receiver and dryer; working pressure 20 bar, two adaptors...

    Code: FP15-2-0
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €68,80 –2 %
    Crimped connecting hose with elbow 3/4" - 2.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (1 pcs)
    €55,16 excl. VAT
    €66,74

    A long 3/4" rubber hose with a 90° elbow at one end for a connection over a greater distance. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.

    Code: FPL34-2-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €81,82 –3 %
    Crimped connecting hose 1" - 2 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (2 pcs)
    €65,59 excl. VAT
    €79,36

    A two-metre 1" rubber hose with straight ends for a compressor station. It connects the compressor, air receiver and dryer, withstands 20 bar and comes with two adaptors.

    Code: FP10-2-0
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €48,12 –2 %
    Crimped connecting hose with elbow 3/4" - 1 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €38,58 excl. VAT
    €46,68

    A one-metre 3/4" rubber hose with one straight end and a 90° elbow at the other for a short connection in a tight space. Working pressure 20 bar, two adaptors supplied.

    Code: FPL34-1-0
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €72,95 –3 %
    Crimped connecting hose 1" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (2 pcs)
    €58,48 excl. VAT
    €70,76

    A 1" rubber hose with straight ends, 1.5 m long, for connecting a screw compressor to an air receiver or dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.

    Code: FP10-1-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €341,44 –3 %
    Crimped connecting hose 2" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €273,72 excl. VAT
    €331,20

    A 2" rubber hose, 1.5 m long, with straight ends for the largest compressors and air receivers. Working pressure 20 bar, supplied with swivel nuts and two adaptors.

    Code: FP20-1-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €115,71 –3 %
    Crimped connecting hose 1 1/4" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €92,76 excl. VAT
    €112,24

    A 1 1/4" rubber hose, 1.5 m long, with straight ends for a larger compressor station. It connects the compressor to an air receiver or dryer; working pressure 20 bar, two...

    Code: FP54-1-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €50,63 –3 %
    Crimped connecting hose 3/4" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (2 pcs)
    €40,59 excl. VAT
    €49,11

    A 3/4" rubber hose, 1.5 m long, with straight ends for connecting a compressor to an air receiver or dryer. Working pressure 20 bar, two adaptors supplied.

    Code: FP34-1-5
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €35,84 –3 %
    Crimped connecting hose with elbow 1/2" - 2.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    The average product rating is 5,0 out of 5 stars.
    up to 14 days
    €28,73 excl. VAT
    €34,76

    A long 1/2" rubber hose with one end bent at 90° for connecting a compressor and an air receiver that do not stand side by side. Working pressure 20 bar; swivel nuts and two...

    Code: FPL12-2-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €90,68 –3 %
    Crimped connecting hose 1" - 2.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €72,69 excl. VAT
    €87,96

    A long 1" rubber hose with straight ends for connecting a compressor to an air receiver or to the start of the pipework. Working pressure 20 bar; swivel nuts and two adaptors...

    Code: FP10-2-5
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €290,94 –3 %
    Crimped connecting hose with elbow 1 1/2" - 2.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €233,23 excl. VAT
    €282,21

    A long 1 1/2" rubber hose with one end bent at 90° for connecting a compressor to an air receiver over a greater distance. Working pressure 20 bar, two adaptors supplied.

    Code: FPL15-2-5
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €55,01 –3 %
    Crimped connecting hose with elbow 3/4" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (1 pcs)
    €44,10 excl. VAT
    €53,36

    A 3/4" rubber hose, 1.5 m long, with a 90° elbow at one end for connecting a compressor to an air receiver. Working pressure 20 bar; swivel nuts and two male-thread adaptors...

    Code: FPL34-1-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €203,43 –3 %
    Crimped connecting hose 1 1/2" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (1 pcs)
    €163,07 excl. VAT
    €197,32

    A 1 1/2" rubber hose, 1.5 m long, with straight ends for compressor stations. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.

    Code: FP15-1-5
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €256,87 –3 %
    Crimped connecting hose with elbow 1 1/2" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €205,92 excl. VAT
    €249,16

    A 1 1/2" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar, two adaptors supplied.

    Code: FPL15-1-5
    Pryžová spojovací hadice s přímými koncovkami a adaptérem s vnějším závitem
    €43,73 –3 %
    Crimped connecting hose 3/4" - 1 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    Stock (2 pcs)
    €35,06 excl. VAT
    €42,42

    A one-metre 3/4" rubber hose with straight ends for a short connection between a compressor and an air receiver. Working pressure 20 bar, supplied with swivel nuts and two...

    Code: FP34-1-0
    Pryžová spojovací hadice s jedním přímým koncem a druhým zalomeným o 90°
    €140,44 –3 %
    Crimped connecting hose with elbow 1 1/4" - 1.5 m Working pressure 20 bar · −40 to +100 °C · 2 adaptors supplied
    up to 14 days
    €112,59 excl. VAT
    €136,23

    A 1 1/4" rubber hose, 1.5 m long, with a 90° elbow at one end for larger compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.

    Code: FPL54-1-5
    Show all alternative products Previous product Next product

    Product rating

    Be the first who will post an article to this item!

    Do not fill out this field

    How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

    By submitting your review you agree to the privacy policy