3in1 Screw Compressor - SCR-3/10APM-200D motor input 3.6 kW, supplied pressure 10 bar, volume flow 19.2 Nm³/h
Code: SCR-3/10APM-200D
Related products
Product detailed description
A compressor, a dryer and a horizontal 200 l receiver on one frame. The entry package of the range gives 320 l/min and occupies 0.82 m² — instead of three units that would have to be piped together and certified, you buy one finished machine.
Why 10 bar, and how it is regulated
Ten bar, regulating down to four. At this size the 200 l receiver does most of the work: it evens out short draws, so the inverter need not react to every squeeze of a trigger and the machine runs more calmly than the bare version.
| 3-in-1 packages — three outputs, identical dryer and receiver | |||
|---|---|---|---|
| Order code | Motor power | Delivery | Per kilowatt |
| SCR-3/10APM-200D — this machine | 3.7 kW | 320 l/min | 86 l/min |
| SCR-4/10APM-200D | 4 kW | 510 l/min | 128 l/min |
| SCR-5,5/10APM-200D | 5.5 kW | 696 l/min | 127 l/min |
All three outputs share the 1,257 × 655 × 1,364 mm enclosure, the weight of 279 kg and the noise level of 65 dB(A) — they differ only in air delivered and energy drawn. The last column shows how many litres you get from each kilowatt of input.
How it differs from its neighbours
The stronger SCR-4/10APM-200D gives 510 l/min in an entirely identical package — same receiver, same dryer, same 279 kg. So 8 % more power buys 59 % more air; the 3 kW only makes sense where demand is genuinely small.
What is inside
Permanent magnet motor
Cooled by oil straight from the airend, with efficiency above IE4 class. On 3.7 kW that means the motor will not overheat even running continuously.
Direct 1:1 drive
The airend bolts straight onto the motor. No V-belts, no gearbox, no flexible coupling — and so no tensioning, no replacements and no losses eating into 320 l/min.
INOVANCE frequency inverter
Vector control developed specifically for screw compressors, with torque from 0.1 Hz. Speed follows demand steplessly, so the machine never idles.
Low-speed screw airend
An in-house airend with a modern rotor profile. Low speed means less wear and a noise level of 65 dB(A) — the level of ordinary conversation.
IT7000 touchscreen controller
A seven-inch colour display, a weekly running schedule, a fault log and automatic restart after a power cut.
Where the machine fits
The package measures 1,257 × 655 × 1,364 mm and weighs 279 kg, 99 kg more than the bare machine. In exchange, the pipework between compressor, dryer and receiver disappears, and so does certification of the assembly. Ventilation of 1,600 m³/h is required.
| SCR-3/10APM-200D — figures for the installation | |
|---|---|
| Free air delivery | 320 l/min · 19.2 m³/h |
| Pressure range | 4 – 10 bar |
| Dimensions L × W × H | 1,257 × 655 × 1,364 mm |
| Floor area | 0.82 m² |
| Weight | 279 kg |
| Connection | 1/2" |
| Noise level | 65 dB(A) |
| Ventilation required | 1,600 m³/h |
| Receiver volume | 200 l |
| Pressure dew point | +5 °C · R513a |
| Voltage | 400 V / 50 Hz |
Equipment
An RDL refrigerant dryer with a +5 °C dew point, environmentally friendly R513a refrigerant and a float condensate drain that does not blow air away. The dryer draws only 130 W.
- permanent magnet motor above IE4 class, cooled by oil from the screw airend
- direct 1:1 drive — no V-belts, no gearbox, no flexible coupling
- INOVANCE frequency inverter with vector control, torque from 0.1 Hz
- in-house low-speed screw airend with a modern rotor profile
- IT7000 touchscreen controller with a 7" display, weekly schedule and fault log
- automatic restart after a power cut and detailed machine status monitoring
- a backlit front panel signalling the machine state across the whole workshop
- air, oil and separator filters, combined intake valve
- extended 5-year warranty with no running-hour limit and no service contracts
- RDL refrigerant dryer, +5 °C dew point, R513a refrigerant, 130 W
- horizontal 200 l receiver forming the frame of the whole package
- zero-loss float condensate drain
- factory-built package — no certification and no on-site pipework needed
If you need cleaner air still, reach for the SCR-3/10APM-200FF with two-stage filtration and a water–oil separator. The bare machine without a receiver is the SCR-3/10APM. The whole range is compared in the SCR-APM Mini range.
Anyone connecting compressor, dryer and receiver themselves pays for the installation, the pipework and the assessment of the assembly. Here it comes finished from the factory.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 320 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 3,7 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 65 dB(A) |
| Weight: | 279 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | Yes |
| In stock: | External warehouse |
| Length: | 1,257 mm |
| Width: | 655mm |
| Height: | 1,364 mm |
| Minimum pressure: | 4 bars |
| Ventilation: | 1,600 m³/h |
| Dryer power consumption: | 130 W |
| Pressure dew point: | +5 °C |
| Refrigerant: | R513a |
| Electronic control unit: | IT7000 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Shanghai Screw Compressor Co., Ltd(SCR) is a manufacturing company founded in 2000, focusing on innovation, research, development, production, sales and service in the field of industrial compressors. The SCR production plant is a modern facility with more than 250 employees on an area of over 80,000m². More than 10% of the staff is in the engineering division with a focus on research and development.
SCR's product portfolio consists of energy-efficient screw compressors, including oil-free and two-stage solutions. SCR manufactures in accordance with ISO 9001 standards, holds CE certification for the European market, UL for the US market, Class Zero certification for oil-free machines and the performance of all machines manufactured is audited by SGS.
After more than 20 years of development, SCR has entered into strategic collaborations with many partners and its products are exported to more than 80 countries worldwide.
In 2018, SCR entered into a strategic cooperation in the form of a joint venture with Japanese manufacturer Anest Iwata, which has implemented its quality and technology control system at SCR, helping to develop and bring new, energy-efficient solutions and even more reliable compressors to the market.
 |
 |
 |
 |
 |
| 83
countries with trade |
500
distributors |
50 000
users |
80 000
square meters |
140 000
pieces produced |
| 2000
Founding of SCR and start of screw compressor production |
2008
Start of production of oil-free SCR-G compressors |
2015
Screw compressors with PM motors are launched on the market |
2016
Production of the unique SCR-PM2 small compressors |
2018
Joint-venture with Japanese manufacturer ANEST-IWATA |
2020
Development of new 2-stage compressors and turbocompressors with magnetic levitation |
Strategic cooperation with ANEST IWATA
|
ANEST IWATA's market share in Japan
|
ANEST IWATA Corporation was founded in 1926 and has been in business for over 90 years. Its shares have been traded on the Tokyo Stock Exchange since 1973. The main activities include the production of industrial painting systems, air compressors and vacuum technology. The main production facilities are located in Akita and Fukushima prefectures and together cover over 50,000m² production areas. In 2018, ANEST IWATA entered into a strategic joint venture with SCR to increase the global market share of both companies in the screw compressor segment and to significantly strengthen the development of energy-efficient compressors and introduce a strict Japanese quality management system into SCR's production plant. |
Global presenceSCR compressors are known worldwide through more than 80 dealerships. In Europe, the SCR brand is officially represented not only in the Czech and Slovak Republics, but also in Great Britain, Spain, Belgium, Finland, Poland, Hungary, Slovenia and Ukraine. |
 |
 |
Development and innovationSCR is dedicated to innovation in air compressor and screw block technology. Driven by our vision, we look to the future and want to extend our efforts into finding disruptive solutions in the development of new technologies that are addressed to meet the needs of our customers. |
 |
SCR brochure - program overviewSCR Compressors | Economical air production solutions Version CZ, PDF - 1,81 MB.
|
.jpg)