Screw Compressor with Filtration - SCR-3/10APM-200FF motor input 3.6 kW, supplied pressure 10 bar, volume flow 19.2 Nm³/h
Code: SCR-3/10APM-200FF
Product detailed description
Clean air from 3.6 kWThe top level of the SCR-APM Mini range in its smallest form. To the receiver-and-dryer assembly it adds two-stage filtration and automatic condensate handling. Range 130 to 320 l/min.
For smaller sites where the air touches the product but demand is modest — dental and medical practices, small paint shops, craft food production.
What sets the SCR-3/10APM-200FF apart
Clean air on a small scale too
An AAFM pre-filter between compressor and dryer and an AAFS microfilter at the outlet. Under reference conditions the air matches class 1-4-1 to ISO 8573-1 — the same as on the larger machines in the range.
WOSM separator
Parts the oil from the water in the condensate. The remaining water goes down the drain and the costly disposal route for oily waste falls away.
Lowest consumption in the range
Three point six kilowatts of input power. If 320 l/min is enough for you, there is no point paying for a bigger motor — the inverter does regulate, but the purchase price stays.
The machine handles the condensate itself
Float drains on both filters and the dryer, an electronic LD drain on the receiver. Nothing to set and nothing blown away.
What is inside
The screw block, electric motor and oil reservoir are integrated into one unit — which is why the machine fits into such a small footprint. Around them sit the air, oil and separator filters, the combined valve, the oil cooler with its fan and the inverter enclosure.
1 screw block with oil reservoir · 2 permanent-magnet motor · 3 air filter · 4 oil filter · 5 separator filter · 6 combined valve · 7 oil cooler · 8 fan · 9 inverter · 10 air outlet
Machine details
Where the savings come from
35 % — no idle running
The inverter varies speed continuously with demand, so the machine draws no power at the moments when nobody is using air.
15 % — no wasted pressure
On the IT7000 you set exactly the pressure you need. Every extra bar costs you consumption.
5 % — no transmission losses
The motor couples straight to the block. Against V-belts you lose neither the transmission efficiency nor the tensioning and replacements.
3 % — efficient IE4 motors
Permanent magnets and oil cooling. Efficiency exceeds the IE4 class requirements of IEC EN 60034.
SCR-3/10APM-200FF specifications
- Control range 130 – 320 l/min (7.8 – 19.2 m³/h) at 10 bar, outlet 1/2".
- Motor input power 3.6 kW, supply 400/50 V/Hz, three-phase, noise 65 ± 3 dB(A) at 1 m.
- The TD assembly plus an AAFM pre-filter, an AAFS microfilter, float drains, an electronic LD drain on the receiver and a WOSM separator. Assembled in the Czech Republic.
- Dimensions 1,257 × 781 × 1,364 mm, weight 289 kg.
- Oil-cooled IE4 permanent-magnet motor, direct coupling with no gearing, INOVANCE inverter with vector control.
- Two-year base warranty with the option to extend to five years with no running-hour limit.
Where the SCR-3/10APM-200FF sits in the range
| SCR-APM Mini screw compressors (10 bar, inverter drive) | |||||||
|---|---|---|---|---|---|---|---|
| Model | Level | Control range | By volume | Input power | Receiver | Dryer | Weight |
| SCR-3/10APM | Base | 130 – 320 l/min | 7.8 – 19.2 m³/h | 3.6 kW | — | no | 180 kg |
| SCR-4/10APM | Base | 200 – 510 l/min | 12.0 – 30.6 m³/h | 4.7 kW | — | no | 180 kg |
| SCR-5,5/10APM | Base | 280 – 690 l/min | 16.8 – 41.4 m³/h | 5.8 kW | — | no | 180 kg |
| SCR-3/10APM-200D | TD | 130 – 320 l/min | 7.8 – 19.2 m³/h | 3.6 kW | 200 l | yes | 278 kg |
| SCR-4/10APM-200D | TD | 200 – 510 l/min | 12.0 – 30.6 m³/h | 4.7 kW | 200 l | yes | 280 kg |
| SCR-5,5/10APM-200D | TD | 280 – 690 l/min | 16.8 – 41.4 m³/h | 5.8 kW | 200 l | yes | 280 kg |
| SCR-3/10APM-200FF (this model) | FF | 130 – 320 l/min | 7.8 – 19.2 m³/h | 3.6 kW | 200 l | yes | 289 kg |
| SCR-4/10APM-200FF | FF | 200 – 510 l/min | 12.0 – 30.6 m³/h | 4.7 kW | 200 l | yes | 291 kg |
| SCR-5,5/10APM-200FF | FF | 280 – 690 l/min | 16.8 – 41.4 m³/h | 5.8 kW | 200 l | yes | 291 kg |
All models: 10 bar, 400/50 V/Hz, three-phase, 1/2" outlet, 65 ± 3 dB(A) noise at 1 m. Dimensions Base 650 × 600 × 860 mm, TD 1,257 × 655 × 1,364 mm, FF 1,257 × 781 × 1,364 mm. FAD output measured to ISO 1217 at each model’s maximum pressure.
What the electricity will cost
| Annual electricity cost (CZK) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Input power | 1,000 h | 2,000 h | 4,000 h | ||||||
| CZK 4/kWh | CZK 5/kWh | CZK 6/kWh | CZK 4/kWh | CZK 5/kWh | CZK 6/kWh | CZK 4/kWh | CZK 5/kWh | CZK 6/kWh | |
| 3 kW | 12,000 | 15,000 | 18,000 | 24,000 | 30,000 | 36,000 | 48,000 | 60,000 | 72,000 |
| 4 kW | 16,000 | 20,000 | 24,000 | 32,000 | 40,000 | 48,000 | 64,000 | 80,000 | 96,000 |
| 5.5 kW | 22,000 | 27,500 | 33,000 | 44,000 | 55,000 | 66,000 | 88,000 | 110,000 | 132,000 |
The table is taken from the manufacturer catalogue. It shows what the electricity costs for a given input power according to the running hours per year and the price per kWh — in other words, how much is at stake when consumption drops.
The table comes from the manufacturer catalogue and runs in 3, 4 and 5.5 kW rows. The SCR-3/10APM-200FF draws 3.6 kW in practice, so it sits between the relevant rows. And above all: the figures apply to a machine running at full load — this one holds its speed to actual demand, so it only reaches full load at peak.
How idle running happens
A fixed-speed compressor runs in cycles. After starting it compresses air and the motor is under load. As soon as it reaches the required pressure it switches to idle running — it no longer makes air, but the motor keeps turning the screw block and consuming energy.
Idle running makes the next start easier, but it lasts tens of seconds and consumes energy to no purpose. The manufacturer states this is typically tens of percent of total consumption. And an awkward ratio applies: the less air you draw, the greater the share of idle running — which is exactly where the biggest scope for savings opens up.
What the IT7000 controller does
- colour touchscreen
- menu in Czech and Slovak
- 7" screen
- parameter display and setting
- weekly running schedule
- fault log archive
- automatic restart
What the assembly includes
| What each assembly includes | ||
|---|---|---|
| Equipment | TD | FF |
| air receiver | yes | yes |
| refrigerant dryer | yes | yes |
| pre-filter + microfilter | — | yes |
| condensate drains | — | yes |
| water-oil separator | — | yes |
The core of the compressor and its main technology stay the same across all versions. The higher assemblies progressively add air-treatment equipment and automatic condensate handling.
Maintenance and service
Cheaper maintenance
No V-belt replacement or tensioning, and no hoses to split or leak. A direct drive has nothing to maintain.
Genuine parts and lubricants
To keep the output up and avoid a failure, only genuine fluids and filters belong in it. Pick the part from the documentation or from the marking on it inside the machine.
Service network
Maintenance is handled by a network of service partners across the country, so you avoid needless call-out costs.
You do not have to buy — SCRent rental
You do not have to buy a new compressor. The SCRent programme lets you take the machine on a five-year long-term rental with monthly payments — in cooperation with Raiffeisenbank.
The monthly payment is not simply the price divided by sixty. It covers everything the next five years of operation will bring. The only thing you pay for yourself is the electricity you use.
What the monthly payment covers
- the price of the chosen SCR screw compressor model
- the price of selected air-treatment equipment
- scheduled maintenance for the whole rental period, with no limit on running hours
- breakdown service — all costs of failures during the rental
- professional installation of all the equipment
- transport of all the equipment to the installation site
- pressure-vessel inspections
- free environmental disposal of oils and filter elements
- insurance against damage and theft for the whole rental period
- operator training for correct running and basic maintenance
- discounts on equipment, spare parts and oils you buy
Without the filtration and separation the same machine is the SCR-3/10APM-200D, and the compressor on its own is the SCR-3/10APM. If you need more air at the same equipment level, there is the SCR-4/10APM-200FF. We also stock separate compressed air filters for other machines.
Hazardous-waste collection is charged per pick-up, not per litre. In a small workshop the separator therefore often saves proportionally more than in a large plant.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 320 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 3,7 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 65 dB(A) |
| Weight: | 290 kg |
| Engine: | Electric |
| Drive: | Direct |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | Yes |
| In stock: | External warehouse |
-
Úspory energií (5.2 MB)
-
Přehled programu SCR (1.8 MB)
-
Pronájem kompresorů SCR (572.3 kB)
-
ZKOUŠKA VELIKOSTI (9.9 MB)
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Shanghai Screw Compressor Co., Ltd(SCR) is a manufacturing company founded in 2000, focusing on innovation, research, development, production, sales and service in the field of industrial compressors. The SCR production plant is a modern facility with more than 250 employees on an area of over 80,000m2. More than 10% of the staff is in the engineering division with a focus on research and development.
SCR's product portfolio consists of energy-efficient screw compressors, including oil-free and two-stage solutions. SCR manufactures in accordance with ISO 9001 standards, holds CE certification for the European market, UL for the US market, Class Zero certification for oil-free machines and the performance of all machines manufactured is audited by SGS.
After more than 20 years of development, SCR has entered into strategic collaborations with many partners and its products are exported to more than 80 countries worldwide.
In 2018, SCR entered into a strategic cooperation in the form of a joint venture with Japanese manufacturer Anest Iwata, which has implemented its quality and technology control system at SCR, helping to develop and bring new, energy-efficient solutions and even more reliable compressors to the market.
 |
 |
 |
 |
 |
| 83
countries with trade |
500
distributors |
50 000
users |
80 000
square meters |
140 000
pieces produced |
| 2000
Founding of SCR and start of screw compressor production |
2008
Start of production of oil-free SCR-G compressors |
2015
Screw compressors with PM motors are launched on the market |
2016
Production of the unique SCR-PM2 small compressors |
2018
Joint-venture with Japanese manufacturer ANEST-IWATA |
2020
Development of new 2-stage compressors and turbocompressors with magnetic levitation |
Strategic cooperation with ANEST IWATA
|
ANEST IWATA's market share in Japan
|
ANEST IWATA Corporation was founded in 1926 and has been in business for over 90 years. Its shares have been traded on the Tokyo Stock Exchange since 1973. The main activities include the production of industrial painting systems, air compressors and vacuum technology. The main production facilities are located in Akita and Fukushima prefectures and together cover over 50,000m2 production areas. In 2018, ANEST IWATA entered into a strategic joint venture with SCR to increase the global market share of both companies in the screw compressor segment and to significantly strengthen the development of energy-efficient compressors and introduce a strict Japanese quality management system into SCR's production plant. |
Global presenceSCR compressors are known worldwide through more than 80 dealerships. In Europe, the SCR brand is officially represented not only in the Czech and Slovak Republics, but also in Great Britain, Spain, Belgium, Finland, Poland, Hungary, Slovenia and Ukraine. |
 |
 |
Development and innovationSCR is dedicated to innovation in air compressor and screw block technology. Driven by our vision, we look to the future and want to extend our efforts into finding disruptive solutions in the development of new technologies that are addressed to meet the needs of our customers. |
 |
SCR brochure - program overviewSCR Compressors | Economical air production solutions Version CZ, PDF - 1,81 MB.
|
.jpg)