SC Oil 46 M mineral oil — SCO-20L for SCR screw compressors mineral · ISO VG 46 · 4,000 h · canister 20 l

The 22 kW at eight bar gives 4,000 l/min. The usual choice where compressed air drives several machines at once.

Ten bar and 3,500 l/min, the last machine in the range with an R 1" outlet. Above it the pipework is sized for R 1½".

Here the range’s second enclosure begins — 1,300 × 1,000 × 1,370 mm and an R 1½" outlet. The 30 kW gives 6,200 l/min at seven bar, half again what the 22 kW gives.

Eight bar from the 30 kW: 6,100 l/min, only 100 less than at seven. Weight 830 kg, noise level 68 dB(A).

The 30 kW at ten bar gives 5,200 l/min and regulates from 1,300 — down to a quarter of its output, the lowest of any ten-bar machine in the range.

The 37 kW shares its enclosure with the 45 kW but runs 2 dB(A) quieter. 7,400 l/min at seven bar, 850 kg.

Eight bar and 7,350 l/min — only 50 l/min less than at seven, the smallest pressure penalty in the upper half of the range.

Ten bar from the 37 kW: 6,500 l/min. The regulation floor here is 2,300 l/min, higher than on the seven-bar version — it wants steadier demand.

The top of the EPM range. Nine and a half thousand litres a minute at seven bar, regulation from 2,500 and ventilation of 9,000 m³/h.

The highest delivery in the range at normal industrial pressure: 9,400 l/min. Enclosure 1,530 × 1,100 mm, weight 890 kg, 72 dB(A).

The most powerful machine in the range at ten bar, 8,000 l/min. It will not drop below 3,000 l/min, so it belongs where air is drawn continuously.

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...