Compressor Pro Line Extensive A29BT-2.2-90CT, 90 l, 400 V Extensive, motor power 2.2 kW, air intake 320 l/min, pressure 10 bar, air receiver 90 l, voltage 400/50 V/Hz, 95 dB Lwa / 75 dB at 4 m
Code: A29BT-2-2-90CT
Related products
Product detailed description
Extensive · 90 l · 400 V · 320 l/minThe workshop standard in the range. The A29BT-2.2-90CT has the A29B pump with a 2.2 kW motor on 400 V and a 90 l tank: 320 l/min of displacement at 1,300 rpm, 10 bar, 63 kg on castors. A reserve for a ratchet, an impact wrench and a blow gun by the lift, and a pump that manages to top it up between bursts — an Extensive for a machine in a fixed spot.
Why 2.2 kW and 90 l on 400 V
Ninety litres is the volume at which a pump with 320 l/min keeps pace with one person and an impact wrench, a ratchet or a sander in bursts: the tank gives the reserve, the pump at 1,300 rpm tops it up before it runs out. The three-phase 2.2 kW motor does not share a breaker with the single-phase circuit of the workshop. The machine is 982 mm long and weighs 63 kg, with one front castor with a brake and an open handle; if you wheel it around the garage every day, go for the Expert with its handle and two castors. The noise level is 95 dB Lwa and 75 dB at 4 m.
Equipment and details
What the A29BT-2.2-90CT has from the factory
- single-stage twin-cylinder oil-lubricated A29B pump with an oil sight glass, V-belt drive under a moulded belt guard, 1,300 rpm
- three-phase 2.2 kW (3 hp) electric motor, 400 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air intake 320 l/min, 10 bar, aftercooler on the pump outlet
- horizontal 90 l tank with a ball valve for draining condensate
- pressure regulator, two gauges (tank and outlet) and a DN 7.2 quick coupling
- one front swivel castor with a brake, two 200 mm rear wheels, open tubular handle
- noise 95 dB Lwa, 75 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A29BT-2.2-90CT is not the right fit
The smaller motor on the same tank is the A29BT-1.5-90CT, a bigger reserve the A29BT-2.2-150CT. Where it belongs among the other nine machines of the range is shown on the A29B range page; ninety-litre machines of other brands are grouped together under compressors with a 90 l tank. Above 320 l/min you are into the machines with the A39B pump.
Values apply to a 50 Hz supply. Air intake is the amount of air the pump draws in. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
The A29BT-2.2-90CT is the machine I would put by most lifts: 320 l/min, 90 l and 400 V — and the Extensive spec is enough if it stays put.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 320 l/min |
| Air delivery: | 208 l/min |
| Pressure vessel volume: | 90 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 2.2 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1,300 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 95 dB - Lwa, 75 dB - Lwp(4m) |
| Weight: | 63 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| Dimensions: | 982 x 502 x 917 mm |
ABAC PRO - A29B Piston Compressor
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Oil change at the compressor
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
