Compressor Expert Zero A39B0P-2.2-90CM, 90 l, 230 V motor power 2.2 kW, air intake 393 l/min, pressure 10 bar, air receiver 90 l, voltage 230/50 V/Hz, 96 dB Lwa / 76 dB at 4 m
Code: A39B0P-2-2-90CM
Related products
Product detailed description
90 l · 230 V · 393 l/minThe bigger pump on a ninety from an ordinary socket. The A39B0P-2.2-90CM draws in 393 l/min — the A39B0 pump with a 2.2 kW motor on 230 V runs at 1,050 rpm, the lowest in the whole range, and fills 90 l to 10 bar; the machine weighs 67 kg. Air without oil through a filter-regulator for a garage or a paint shop where several people draw air but the socket is only 230 V.
A39B0 instead of A29B0: 73 l/min more with the same motor
The same 2.2 kW motor, but a bigger pump: the A39B0 draws in 393 l/min instead of 320 and turns at 1,050 rpm — slower than any other pump in the range. Ninety litres on top give calm cycles for one workstation with a sander, or two with a gun and blowing off. For two kilos more than the A29B0 you get almost a quarter more air from the same socket. If you spray surfaces, take the same pump on 150 or 200 l.
Equipment and details
What the A39B0P-2.2-90CM has from the factory
- oil-free single-stage A39B0 pump with Teflon-coated cylinders, V-belt drive, 1,050 rpm
- 2.2 kW electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air intake 393 l/min, 10 bar, aftercooler on the pump outlet
- horizontal 90 l tank, ball valve for draining condensate
- filter-regulator with a gauge and a DN 7.2 quick coupling on the outlet
- two front swivel castors with brakes, two fixed wheels at the rear, closed handle with a rubber grip
- noise 96 dB Lwa, 76 dB at 4 m
- QR code on the tank opens service videos in the AirTube app; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A39B0P-2.2-90CM is not the right fit
If 320 l/min will do, you save with the A29B0P-2.2-90CM; for three-phase mains there is the A39B0P-2.2-90CT. Both pumps on all the tanks can be compared on the Expert Zero range page; ninety-litre machines of other brands are among compressors with a 90 l tank. The A39B0 pump goes with an impact wrench.
Values apply to a 50 Hz supply. Air intake is the amount of air the pump draws in. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
The ninety with the A39B0 pump — the most air you get oil-free from an ordinary socket on a sensible tank.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 393 l/min |
| Air delivery: | 255 l/min |
| Pressure vessel volume: | 90 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1050 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oil-free |
| Noise: | 96 dB - Lwa, 76 dB - Lwp(4m) |
| Dimensions: | 1123 × 502 × 930 mm |
| Weight: | 67 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional, Industrial |
| Development: | Mobile |
ABAC ZERO - Environmentally friendly oil-free compressors
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
