Pressure regulator directly on the air tank - 3/8"
Code: RTV-38Related products
A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The A29 pump is enough for a tyre inflator, a blow gun, a...
A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The A29 pump is enough for a tyre inflator, a blow gun, a...
The stronger sibling of the A29 on the same pulley. Same installation envelope, higher output — the one to pick when the existing block has stopped keeping up and the motor and...
Clearance of the previous generation, 2 units in stock: oil-free A29B0 pump with 2.2 kW on 400 V, 320 l/min, 10 bar, 50 l tank, 58 kg, two DN 7.2 quick couplings on the outlet,...
A compromise between stored air and what can still sensibly be wheeled around a workshop. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a smaller impact...
A compromise between stored air and what can still sensibly be wheeled around a workshop. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a smaller impact...
For a fixed spot where tools draw air in longer bursts. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a smaller impact wrench. It runs from an ordinary...
The smallest and lightest machine in the range — two people load it into a van and take it to the job. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a...
The smallest and lightest machine in the range — two people load it into a van and take it to the job. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a...
The smallest machine for a fixed spot — it fits under a bench or into a corner. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a smaller impact wrench....
The smallest machine for a fixed spot — it fits under a bench or into a corner. The A29B pump is enough for a tyre inflator, a blow gun, a stapler and a smaller impact wrench....
A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The stronger A29B pump also handles a larger impact wrench or a...
A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The stronger A29B pump also handles a larger impact wrench or a...
The Extensive fifty with the stronger motor: the A29B pump with 2.2 kW on 400 V draws in 320 l/min at 1,300 rpm, 10 bar, 50 l tank, 54 kg. One front castor with a brake; 95 dB...
Clearance of the previous generation: A29B pump with 2.2 kW for a 230 V socket, 320 l/min at 1,300 rpm, 10 bar, 90 l, 56 kg. Moulded guard, aftercooler, regulator, two gauges,...
A mid-range single-stage pump for a workshop in regular use — spraying, impact wrenches, longer draws.
Product detailed description
Pressure regulator 3/8" suitable directly for ABAC compressor pressure vessel
- Special versions of the controllers for direct mounting on a flat air duct
- Original accessories for ABAC compressors
- Used to reduce the compressor output pressure, equipped with pressure gauge and two quick couplings at the outlet for connecting 2 hoses at the same time
Additional parameters
| Category: | Pressure regulator for a compressor, mounted on the receiver |
|---|---|
| Pressure: | 18 bar |
| Medium: | Compressed air |
| Manometer connection: | 1/4" |
| Regulatory range: | 0 - 16 bar |
| Pressure gauge range: | 0 - 16 bar |
| Thread: | G 3/8" |
| In stock: | In store, External warehouse |
Pressure regulator from ABAC as an accessory for ABAC piston compressors. The regulator is suitable for mounting directly on the air receiver of ABAC piston compressors in 1/2"...
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.

Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.

Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.

A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.

Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
